What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

onzedge · 07-17-2014, 08:59 PM

Quote:

Originally Posted by MadChemist

Installed hotchkis sway bars and mounted AG M310 in gloss brushed antique bronze. Also, removed the exhaust.

Tomorrow, I battle the demon bolt and install my ART pipes and invidia cbe. Fingers crossed it goes smoothly

davwak · 07-17-2014, 09:46 PM

Didn't do something with my Z, but for the Z. Ordered the FI exhaust and made an appointment for some tint on Tuesday.

woot woot

LNATKFRNG · 07-17-2014, 09:55 PM

Quote:

Originally Posted by Morbid370Z

Installed Z1 post-maf tubes and AFE filters. Is it just me or were those a paint in the arse to wedge into place?

Worth it though!

The second or third time I put them on they got 1/2 inch shorter

aszyd · 07-17-2014, 10:07 PM

I thanked the stars that I did not throw away the broken steering wheel wiring assembly. When I installed my new one, I did not realize that the steering angle sensor was a separate part and left it attached to the unit, figuring that I accidentally bought the wrong model of assembly. The angle sensor costs $800! Luckily, as noted earlier, I still had the broken piece, so I was able to pull my old sensor off.

kenchan · 07-17-2014, 11:33 PM

dang, close call!

DelawareTerp · 07-18-2014, 01:00 AM

Quote:

Originally Posted by aszyd

I thanked the stars that I did not throw away the broken steering wheel wiring assembly. When I installed my new one, I did not realize that the steering angle sensor was a separate part and left it attached to the unit, figuring that I accidentally bought the wrong model of assembly. The angle sensor costs $800! Luckily, as noted earlier, I still had the broken piece, so I was able to pull my old sensor off.

That would have been an expensive lesson! Glad it worked out for ya tho!

Shotta · 07-18-2014, 08:08 AM

Replaced the burned out dust seals on my ap racing calipers.

aszyd · 07-18-2014, 11:32 AM

Quote:

Originally Posted by DelawareTerp

That would have been an expensive lesson! Glad it worked out for ya tho!

Quite!

I was shocked when I saw the cost of a new sensor. For reference, the wiring assembly that it attaches to only costs ~$200. I would have assumed that it was the other way around.

b15 · 07-18-2014, 11:50 AM

Quote:

Originally Posted by Morbid370Z

Installed Z1 post-maf tubes and AFE filters. Is it just me or were those a paint in the arse to wedge into place?

Worth it though!

Nope. Seems to be a common thing, I had to muscle mine in as well. I like how it cleans up the engine bay.

onzedge · 07-18-2014, 02:02 PM

Quote:

Originally Posted by kenchan

dang, close call!

(with everything Mr. Kenchan posts, even those posts I report to moderators, which are many)

brancky3 · 07-18-2014, 03:40 PM

Yesterday I put in an LED kit for the interior & license plate lights.

Also, blacked out my emblems. Still debating if I should debadge the 370Z emblem before my paint starts to fade

Brad Edwards · 07-18-2014, 04:20 PM

Did a wash and a wax job, Wax On, Wacks Off - getting her ready to meet some other members for Z-Cruz here in Sunny San Diego tomorrow.

JARblue · 07-18-2014, 04:31 PM

Just ordered some stylish new filters for my intakes

Conical Filters - Turbo , Street and Drag

( Click to show/hide )

I noticed the rubber on one of my current filters has separated in small section. I am hoping R2C will take care of me and replace the filter at no charge. And then I'll have two sets to swap between, making cleanings easier

FairladyZ10PG · 07-18-2014, 04:35 PM

Quote:

Originally Posted by brancky3

yesterday i put in an led kit for the interior & license plate lights.

Also, blacked out my emblems. Still debating if i should debadge the 370z emblem before my paint starts to fade

do it!

RN SHARK · 07-18-2014, 05:47 PM

Sent my Z and SRT off to NC where I will be moving to next month

07-17-2014, 09:46 PM	#527 (permalink)
davwak Base Member Join Date: Jun 2014 Location: Canada Posts: 77 Drives: 14 Nissan 370Z RAA Rep Power: 11	Didn't do something with my Z, but for the Z. Ordered the FI exhaust and made an appointment for some tint on Tuesday. woot woot Ghostvette, lgarcia, Bossless1 and 1 others like this.

07-17-2014, 10:07 PM	#529 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	I thanked the stars that I did not throw away the broken steering wheel wiring assembly. When I installed my new one, I did not realize that the steering angle sensor was a separate part and left it attached to the unit, figuring that I accidentally bought the wrong model of assembly. The angle sensor costs $800! Luckily, as noted earlier, I still had the broken piece, so I was able to pull my old sensor off. kenchan, jpkirk, DelawareTerp and 1 others like this. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

07-17-2014, 11:33 PM	#530 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	dang, close call! onzedge likes this.

07-18-2014, 08:08 AM	#532 (permalink)
Shotta Enthusiast Member Join Date: Apr 2012 Location: Niagara Posts: 316 Drives: 2010 370z black M6 Rep Power: 13	Replaced the burned out dust seals on my ap racing calipers. __________________ 6MT - designed for perfectionists 7AT - designed for enthusiasts

07-18-2014, 04:31 PM	#538 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Just ordered some stylish new filters for my intakes Conical Filters - Turbo , Street and Drag ( Click to show/hide ) I noticed the rubber on one of my current filters has separated in small section. I am hoping R2C will take care of me and replace the filter at no charge. And then I'll have two sets to swap between, making cleanings easier onzedge, Pintsize725 and Ghostvette like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

07-18-2014, 04:20 PM	#537 (permalink)
Brad Edwards Base Member Join Date: Jan 2014 Location: At the wheel Posts: 159 Drives: everywhere I go... Rep Power: 11	Did a wash and a wax job, Wax On, Wacks Off - getting her ready to meet some other members for Z-Cruz here in Sunny San Diego tomorrow.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM