What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

DeliriousClam · 05-21-2017, 09:26 PM

Quote:

Originally Posted by Jayhovah

How'd you get the pinstripe on there straight? I'd like to do something like this but my freehanding skills are not so great.

If you can get me a good shot of the wheel I can probably tell you how

rey127 · 05-21-2017, 10:48 PM

Quote:

Originally Posted by BLK N-Z34

I painted the stock wheels on my Nismo today. Gloss black with a red pinstripe. Tried out a new product and it worked pretty well.

what paint did you use? I'm trying to make some touch ups on mine for scratches and it looks as glossy as yours.

B&W_Evader · 05-22-2017, 09:34 AM

Engine Oil change and Diff Oil change over the weekend. My baby is ready to ride hard.

(i did not clean the oil container between changes so you see some engine oil mixed in with the gear oil)

Jayhovah · 05-22-2017, 10:18 AM

Quote:

Originally Posted by DeliriousClam

If you can get me a good shot of the wheel I can probably tell you how

Stock 13+ Sport wheels...

DeliriousClam · 05-22-2017, 12:24 PM

Quote:

Originally Posted by Jayhovah

Stock 13+ Sport wheels...

hmmm.... Easiest way I can think of is measuring the distance from the edge of the rim to where the spoke begins and mask that much around the entire wheel. It's going to be annoying unfortunately

crazy4oldcars · 05-22-2017, 12:46 PM

There is a tool I saw on one of the Sunday fixit shows. It's a little paint pot with a wheel to apply the color. Jack the wheel up, spinit it slowly and apply the paint.
I'd be willing to bet your local automotive paint shop has, or can get one.
Your other option is a narrow brush, a slow-spinning wheel, and a steady hand.

Kirk B.

sx moneypit · 05-22-2017, 01:00 PM

This??https://www.beugler.com/

crazy4oldcars · 05-22-2017, 01:09 PM

That's the one. Comes in different widths, and has a guide.
Hell, I'd have stripes on the trashcan wheels, lol.

Kirk B.

DeliriousClam · 05-22-2017, 02:05 PM

I need help because I keep hearing two different answers to one important question. The fluid in my clutch master cylinder is black/brown. I've heard that it's a sign of the CSC failing and it needs to be replaced but I've also heard that it changes colors when the fluid boils and hasn't been changed. Clutch fluid has never been changed as far as I know and the car has 30k miles on it. What do you think is more likely? I'm going to change the fluid either way

Jayhovah · 05-22-2017, 02:09 PM

Quote:

Originally Posted by DeliriousClam

I need help because I keep hearing two different answers to one important question. The fluid in my clutch master cylinder is black/brown. I've heard that it's a sign of the CSC failing and it needs to be replaced but I've also heard that it changes colors when the fluid boils and hasn't been changed. Clutch fluid has never been changed as far as I know and the car has 30k miles on it. What do you think is more likely? I'm going to change the fluid either way

Could be both. You mentioned earlier you thought your CSC was going out - what are the symptoms?

DeliriousClam · 05-22-2017, 03:15 PM

Quote:

Originally Posted by Jayhovah

Could be both. You mentioned earlier you thought your CSC was going out - what are the symptoms?

Car doesn't want to go 1st, 6th, or reverse sometimes, and the fluid bs. Maybe I'm just being paranoid. Including pictures of the fluid in the reservoir and on a paper towel.

Jayhovah · 05-22-2017, 03:42 PM

Quote:

Originally Posted by DeliriousClam

Car doesn't want to go 1st, 6th, or reverse sometimes, and the fluid bs.

Actually kind of sounds to me like it's the master that is dying on you. The Z world knows how poor the CSC is, but in reality our CMC is almost as unreliable. I'd suggest flushing that nasty fluid out and changing the master first... it's a good (and likely necessary) practice to change out the master if changing out the slave anyway, so try swapping it first...then if the symptoms persist, change the slave too.

While you're at all of this, add some heat sleeve to the line that goes to the CSC.. it runs right by your exhaust manifold.

DeliriousClam · 05-22-2017, 03:47 PM

Quote:

Originally Posted by Jayhovah

Actually kind of sounds to me like it's the master that is dying on you. The Z world knows how poor the CSC is, but in reality our CMC is almost as unreliable. I'd suggest flushing that nasty fluid out and changing the master first... it's a good (and likely necessary) practice to change out the master if changing out the slave anyway, so try swapping it first...then if the symptoms persist, change the slave too.

While you're at all of this, add some heat sleeve to the line that goes to the CSC.. it runs right by your exhaust manifold.

I'm going to rock the slow camry for a while. Thanks for pointing that out.

Quote:

While you're at all of this, add some heat sleeve to the line that goes to the CSC.. it runs right by your exhaust manifold.

Would that still be needed if I switch to a stainless steel line?

Jayhovah · 05-22-2017, 03:50 PM

Quote:

Originally Posted by DeliriousClam

I'm going to rock the slow camry for a while. Thanks for pointing that out.

Would that still be needed if I switch to a stainless steel line?

Absolutely. The ZSpeed SS line even comes prewrapped in DEI heat sleeve.

DeliriousClam · 05-22-2017, 03:52 PM

Quote:

Originally Posted by Jayhovah

Absolutely. The ZSpeed SS line even comes prewrapped in DEI heat sleeve.

thank you good sir

05-22-2017, 02:05 PM	#9879 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	I need help because I keep hearing two different answers to one important question. The fluid in my clutch master cylinder is black/brown. I've heard that it's a sign of the CSC failing and it needs to be replaced but I've also heard that it changes colors when the fluid boils and hasn't been changed. Clutch fluid has never been changed as far as I know and the car has 30k miles on it. What do you think is more likely? I'm going to change the fluid either way __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 08:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 09:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 07:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM

05-22-2017, 12:46 PM	#9876 (permalink)
crazy4oldcars Enthusiast Member Join Date: Aug 2016 Location: SE Texas Posts: 448 Drives: '16 Nismo Tech Rep Power: 28413	There is a tool I saw on one of the Sunday fixit shows. It's a little paint pot with a wheel to apply the color. Jack the wheel up, spinit it slowly and apply the paint. I'd be willing to bet your local automotive paint shop has, or can get one. Your other option is a narrow brush, a slow-spinning wheel, and a steady hand. Kirk B.

05-22-2017, 01:00 PM	#9877 (permalink)
sx moneypit Premium Member Join Date: Oct 2014 Location: Memphis,Tn. Age: 67 Posts: 3,335 Drives: 2010 370Z PG 6 spd Rep Power: 2684371	This??https://www.beugler.com/

05-22-2017, 01:09 PM	#9878 (permalink)
crazy4oldcars Enthusiast Member Join Date: Aug 2016 Location: SE Texas Posts: 448 Drives: '16 Nismo Tech Rep Power: 28413	That's the one. Comes in different widths, and has a guide. Hell, I'd have stripes on the trashcan wheels, lol. Kirk B.