Need tips how to shift smoothly

MicntaeG35 · 08-12-2014, 11:33 AM

Quote:

Originally Posted by Aescen

I've slowly been adjusting to the Z clutch. I think I found the sweet spot from 1st-2nd at around 2.5k RPM. Just release the clutch nice and slow and hold for a second where it catches before you let off. I'm probably going to replace it sometime down the road, but with enough driving you'll get used to it.

After I read this post I started to expirement a little bit. I usually shift out of 1-3 around 3k-3500 and if you let the rpms drop to 2500 or right under that, it will shift smooth. Try it! Rev to 3500, shift, let rpm drop to 2400 and see if that doesn't help. It took some time for me to actually find the sweet spot without having to watch the cluster. But every body drives different so you just got to find what works best for you!

kenchan · 08-12-2014, 11:34 AM

Quote:

Originally Posted by cooltoy

Doesn't the fit only have one mode? Eco.

yah, that might be so...

kenchan · 08-12-2014, 11:36 AM

Quote:

Originally Posted by MicntaeG35

After I read this post I started to expirement a little bit. I usually shift out of 1-3 around 3k-3500 and if you let the rpms drop to 2500 or right under that, it will shift smooth. Try it! Rev to 3500, shift, let rpm drop to 2400 and see if that doesn't help. It took some time for me to actually find the sweet spot without having to watch the cluster. But every body drives different so you just got to find what works best for you!

yah, you just need to find the sweet spot for your driving style. each acceleration varies in rpm for 1-2, 2-3, etc starting from how you engage the clutch at standstill.

TimBob · 08-12-2014, 03:11 PM

Glad to hear I am not the only one having trouble getting a smooth 1-2 shift. I know I am out of practice with a stick (haven't driven a stick more than a handful of times since 1998) but I just seem to miss that "butter" point on the 1-2 shift about 95% of the time. Admittedly I've only had the car for 3 weeks, but still...

Aescen · 08-12-2014, 03:23 PM

Quote:

Originally Posted by MicntaeG35

After I read this post I started to expirement a little bit. I usually shift out of 1-3 around 3k-3500 and if you let the rpms drop to 2500 or right under that, it will shift smooth. Try it! Rev to 3500, shift, let rpm drop to 2400 and see if that doesn't help. It took some time for me to actually find the sweet spot without having to watch the cluster. But every body drives different so you just got to find what works best for you!

glad i could help in some way.

cooltoy · 08-12-2014, 03:35 PM

I am going to try all this.

b15 · 08-12-2014, 03:46 PM

Quote:

Originally Posted by TimBob

Glad to hear I am not the only one having trouble getting a smooth 1-2 shift. I know I am out of practice with a stick (haven't driven a stick more than a handful of times since 1998) but I just seem to miss that "butter" point on the 1-2 shift about 95% of the time. Admittedly I've only had the car for 3 weeks, but still...

Just be patient and don't over think it. I find I shift worse when I'm really thinking about it.

Davey · 08-12-2014, 05:07 PM

Quote:

Originally Posted by TimBob

Glad to hear I am not the only one having trouble getting a smooth 1-2 shift. I know I am out of practice with a stick (haven't driven a stick more than a handful of times since 1998) but I just seem to miss that "butter" point on the 1-2 shift about 95% of the time. Admittedly I've only had the car for 3 weeks, but still...

Get stuck in traffic a few times.

Cory Gillmore · 12-23-2017, 09:30 PM

I’ve found that letting the clutch out slowly from 1st to 2nd helps me the most. I’ve yet to get a smooth shift from 1st to 2nd while trying to drive aggressively. I’m sure I’ll figure it out. I’m a novice with an MT. Not the first MT I’ve ever driven but the first I’ve ever owned or really driven for any real amount of time. Oddly enough I had a much easier time learning on my sport bike.

08-12-2014, 03:35 PM	#66 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,973 Drives: 14 PW 370Z S/T MT Rep Power: 243722	I am going to try all this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installed Alcantara shift boot and Nismo Ti Shift Knob	austex	Exterior & Interior	17	09-21-2014 08:15 PM
[FOR SALE] Stock Shift knob & custom CFE shift boot	edub370	Parts for sale (Private Classifieds)	4	08-21-2013 01:23 PM
Shift knob installation? Shift knob recommendations?	Gibby1113	DIY Section (Do-It-Yourself)	21	05-30-2013 08:08 PM
How to drive a manual Z smoothly?	tonybui	Nissan 370Z General Discussions	73	08-23-2012 08:30 PM
SOLD: 7AT Red/Carbon Shift knob with OEM 6MT Shift boot (SW Florida)	TMAN1985	Parts for sale (Private Classifieds)	8	04-23-2012 10:01 PM

08-12-2014, 03:11 PM	#64 (permalink)
TimBob Base Member Join Date: Jul 2014 Location: St. Charles, MO Posts: 14 Drives: 14 370Z TourSport M6 Rep Power: 11	Glad to hear I am not the only one having trouble getting a smooth 1-2 shift. I know I am out of practice with a stick (haven't driven a stick more than a handful of times since 1998) but I just seem to miss that "butter" point on the 1-2 shift about 95% of the time. Admittedly I've only had the car for 3 weeks, but still...

12-23-2017, 09:30 PM	#69 (permalink)
Cory Gillmore Base Member Join Date: Nov 2017 Location: Memphis TN Posts: 113 Drives: 09 Sport/Touring MT Rep Power: 3363	I’ve found that letting the clutch out slowly from 1st to 2nd helps me the most. I’ve yet to get a smooth shift from 1st to 2nd while trying to drive aggressively. I’m sure I’ll figure it out. I’m a novice with an MT. Not the first MT I’ve ever driven but the first I’ve ever owned or really driven for any real amount of time. Oddly enough I had a much easier time learning on my sport bike.