Race Ramps - who's got 'em?

kannibul · 09-10-2009, 09:41 AM

I'm sending back the ramps I bought from Griot's Garage, as they don't clear the Z...I managed to rip out part of my chin spoiler on the way down (snapped back in, thankfully!), and they aren't as wide as I thought (The ad said they are 9.5" wide, which is true, but there's about 2-3" wasted for side-curbs...)

So, that brings me to race ramps. Since I don't have a yard stick, I can't figure if I just need the 67XT by themselves, or, if I'll need the extenders too.

Anyone got 'em? Can you confirm what's needed?

kdo2milger · 09-10-2009, 10:09 AM

i use regular utility trailer ramps with a 2x12 12ft piece of lumber cut in half and put the boards about halfway down the utility ramps and i clear the sport spoiler by a little over an inch when loading/unloading from my trailer...

Old Chuck · 09-10-2009, 11:57 AM

9/7/09- Race Ramps by pointman and 9/7/09 "Ouch, dent on my fender.... by Danny 3.7. Pointman's post talks to the race ramps and the other by Danny 3.7 shows a picture of a 370Z on race ramps. Hope this helps..

VCuomo · 09-10-2009, 02:51 PM

I believe that the 56" Race Ramps will also work (they aren't as wide as the 67" ramps, but they have the same incline angle).

09-10-2009, 09:41 AM	#1 (permalink)
kannibul A True Z Fanatic Join Date: Jun 2009 Location: Jenks, OK Posts: 2,281 Drives: 370z Touring/Sport Rep Power: 267	Race Ramps - who's got 'em? I'm sending back the ramps I bought from Griot's Garage, as they don't clear the Z...I managed to rip out part of my chin spoiler on the way down (snapped back in, thankfully!), and they aren't as wide as I thought (The ad said they are 9.5" wide, which is true, but there's about 2-3" wasted for side-curbs...) So, that brings me to race ramps. Since I don't have a yard stick, I can't figure if I just need the 67XT by themselves, or, if I'll need the extenders too. Anyone got 'em? Can you confirm what's needed?

09-10-2009, 10:09 AM	#2 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 59	i use regular utility trailer ramps with a 2x12 12ft piece of lumber cut in half and put the boards about halfway down the utility ramps and i clear the sport spoiler by a little over an inch when loading/unloading from my trailer... __________________ Project *NISMO*

09-10-2009, 11:57 AM	#3 (permalink)
Old Chuck Base Member Join Date: Apr 2009 Location: Florida & SC Posts: 86 Drives: 05 Tundra& 02 Subaru Rep Power: 16	Need to look at post from 9/7/09- Race Ramps by pointman and 9/7/09 "Ouch, dent on my fender.... by Danny 3.7. Pointman's post talks to the race ramps and the other by Danny 3.7 shows a picture of a 370Z on race ramps. Hope this helps..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil change, Jack stands or ramps with diffuser?	spearfish25	Nissan 370Z General Discussions	31	08-10-2010 09:38 PM
Do you race?	wanta370	Track / Autocross / Drifting / Dragstrip	33	02-25-2010 12:42 PM
Race Ramps 67" 2 piece	Pointman	Nissan 370Z General Discussions	6	09-07-2009 09:49 AM
Let's Race!!	370Ztune	The Lounge (Off Topic)	44	09-03-2009 03:07 PM
Our Old Race Team	FuszNissan	The Lounge (Off Topic)	7	07-21-2009 01:24 AM

09-10-2009, 02:51 PM	#4 (permalink)
VCuomo Track Member Join Date: May 2009 Location: SoCal Posts: 887 Drives: BMW 335i Sport Rep Power: 17	I believe that the 56" Race Ramps will also work (they aren't as wide as the 67" ramps, but they have the same incline angle).