MAF tubes

onzedge · 04-27-2014, 08:20 AM

Quote:

Originally Posted by Jimbo370

Sorry about your car wish you well and at least you were not hurt.

I have stated this many times on the forum -- please refrain from posting whilst under the influence of hallucinogens or in a drunken state.

We all appreciate your cooperation.

onzedge · 04-27-2014, 08:20 AM

Quote:

Originally Posted by kenchan

yah, my car was taken by aliens last night...

Yours too????

kenchan · 04-27-2014, 08:43 PM

Quote:

Originally Posted by Jimbo370

Recently changed to silicone MAF tubes and added a Z-speed undershield. It has new penn 5W30 platinum oil in the motor. I think I am going to change some of the other fluids manual and diff since it has been 58k miles. does running the air make a difference?

does keep the fan running more often.

Vorttam · 04-27-2014, 11:37 PM

I am also curious, I changed out my stock intake tubes with the MAF one. Both had some extra stuff attached to it. Just curious what purpose those served?

H2O_Doc · 04-28-2014, 01:03 AM

Quote:

Originally Posted by Vorttam

I am also curious, I changed out my stock intake tubes with the MAF one. Both had some extra stuff attached to it. Just curious what purpose those served?

It's like an appendix for your car.

Colnajoe · 04-29-2014, 01:55 AM

back in the day when it ran too hot (stuck closed)or too cold (stuck open), it was the thermostat

Colnajoe · 04-29-2014, 01:58 AM

Quote:

Originally Posted by Vorttam

I am also curious, I changed out my stock intake tubes with the MAF one. Both had some extra stuff attached to it. Just curious what purpose those served?

They are resonators... helps quiet the intake and give a custom sound.

Vorttam · 04-29-2014, 02:05 PM

Interesting, thanks

Chuck33079 · 04-29-2014, 02:08 PM

Quote:

Originally Posted by Vorttam

I am also curious, I changed out my stock intake tubes with the MAF one. Both had some extra stuff attached to it. Just curious what purpose those served?

Are you talking about the baffles attached by a small hose to the intake and valve cover? That's part of the PCV system.

Vorttam · 04-29-2014, 10:06 PM

Quote:

Originally Posted by Chuck33079

Are you talking about the baffles attached by a small hose to the intake and valve cover? That's part of the PCV system.

Yes I was. When I ordered my MAF's I also ordered the PCV hoses, I just ran the PCV hose to the MAF. I did not put the baffles on, should I have?

04-29-2014, 01:55 AM	#21 (permalink)
Colnajoe Base Member Join Date: Aug 2012 Location: Joliet, IL Posts: 32 Drives: 2013 sport touring Rep Power: 13	back in the day when it ran too hot (stuck closed)or too cold (stuck open), it was the thermostat __________________ Sent while driving......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone seen the obx long tubes yet??	edub370	Intake/Exhaust	18	12-22-2014 12:09 AM
Z1 side pcv tubes fitments with smooth tubes	AES	Intake/Exhaust	15	06-19-2014 11:55 AM
FS new HPS post MAF tubes	azn370z	North West Region	0	03-14-2011 10:49 PM
MAF tubes?	SE	Intake/Exhaust	5	04-29-2010 03:36 PM
intake tubes	black09Z	Wanted	1	03-26-2009 06:58 PM

04-27-2014, 11:37 PM	#19 (permalink)
Vorttam Base Member Join Date: Apr 2014 Location: Allen Posts: 46 Drives: 2011 370z 6MT Rep Power: 11	I am also curious, I changed out my stock intake tubes with the MAF one. Both had some extra stuff attached to it. Just curious what purpose those served?

04-29-2014, 02:05 PM	#23 (permalink)
Vorttam Base Member Join Date: Apr 2014 Location: Allen Posts: 46 Drives: 2011 370z 6MT Rep Power: 11	Interesting, thanks