Dynolicious iPhone??

marcussoori · 08-31-2009, 07:04 PM

Any of you tried this app. yet? This app. is PocketDyno, not Dynolicious. Sorry for the confusion.

I'd like to know if you think the below info is reliable.

The run was done on an overcast day on a clean one-lane country road. The temp. was 70 degrees.

I have a 370Z sport package with auto, shifting was done in manual mode with 1750rpm before launch. The PocketDyno autostart feature was activated.

*** PocketDyno™ Raceway ***
WELCOME TO POCKETDYNO™ RACEWAY
VISIT US AT Home

Run: 4
Aug 31, 2009 5:32:23 PM

--------- LEFT ...... RIGHT
*
Car # ... 1 *
Class ... Sports * *
*
DIAL ... * *
R/T ... 0.61 *
60' ... 2.19 *
330 ... 5.71 *
1/8 ... 8.59 *
MPH ... 87.18 *
1000 ... 11.08 *
1/4 ... 13.18 *
MPH ... 108.55 *
Left 1st
AUTOSTART ON

Copyright © 2008 InMotion Software, LLC

0-60 was listed as 4.70 seconds.

My mods (about 4000 miles ago) are Stillen long tube intake and exhaust, and Berk HFCs. Oil change was performed 500 miles ago.

My questions:

1) Why did my mods not give me a faster 0-60 than the 4.6 for autos that has been referenced on this board before?

2) Is this iPhone app. reliable? (My friend was in the car to stabilize the iPhone).

3) WHP was computed as 227!!??

Any comments are appreciated...

***UPDATE***

I used the DA calculator on dragtimes.com and got the following corrected results:

Stock and Mildly Modified Naturally Aspirated Engines
12.918 @ 110.804 MPH

***UPDATE #2***

Using http://www.wallaceracing.com/0-60_equation.php, the following was the calculated 0-60 time from the 1/8 mile stats given by the PocketDyno app.:

4.07!!

370z4Steve · 08-31-2009, 07:23 PM

my question is do you have dynolicious or pocket dyno? Those are (2) different programs..and between the two.. dynolicious is better reported on by quite a few over the net. Whatever you are using iphone app, G-tech, whatever device its best just to consider it in relative and not absolute terms, because it could be off from highly calibrated instruments by who knows.. but they are close within a few tenths if you input the right data on setup.

Asheth · 08-31-2009, 07:28 PM

There you Go G-Tech Vs. Iphone Dynolicious Vs Mustang Dyno seems somewhat accurate. Has to be calibrated

racerxj17 · 08-31-2009, 07:38 PM

what data did u use? seems vry close

marcussoori · 08-31-2009, 07:55 PM

PocketDyno doesn't require any inputs. Dynolicious does, I think.

Modshack · 08-31-2009, 07:58 PM

Plug the right weight in? Take the spec, add Gas@ 6lb/gal Plus You...Should be in the 3500 lb range I'm guessing...

Modshack · 08-31-2009, 08:00 PM

Quote:

Originally Posted by marcussoori

PocketDyno doesn't require any inputs. Dynolicious does, I think.

Then it can't be that accurate. hp calcs require weight and time.

marcussoori · 08-31-2009, 08:20 PM

Quote:

Originally Posted by Modshack

Plug the right weight in? Take the spec, add Gas@ 6lb/gal Plus You...Should be in the 3500 lb range I'm guessing...

I put 3232. Sorry for overlooking this, I just checked.

john370z · 08-31-2009, 09:14 PM

what percent did you put as drivetrain loss?

I ran 3 runs with the iphone program and here r my results:
3500 lb car
20% loss
5500 ft elevation
7AT with Stille CBE
0-30 2.72
0-60 6.27
0-100 14.46
1/4 mi 14.76 @ 97.9 mph
peak hp 265

racerxj17 · 08-31-2009, 09:45 PM

Quote:

Originally Posted by marcussoori

I put 3232. Sorry for overlooking this, I just checked.

not a chance

john370z · 08-31-2009, 09:51 PM

I must admit the runs were pretty close and I was mostly interested in getting a baseline for future mods. The results would be drastically changed if I changed the weight or % drivetrain loss.

john370z · 08-31-2009, 09:52 PM

The 1/4 mi mph is high for a car doing 0-60 in over 6 seconds...interesting

marcussoori · 08-31-2009, 10:49 PM

John370z, looks like you may have used dynolicious, i used pocketdyno.

marcussoori · 08-31-2009, 10:50 PM

Also, pocketdyno doesn't have a way to input drivetrain loss. As far as I can tell...

08-31-2009, 07:04 PM	#1 (permalink)
marcussoori Enthusiast Member Join Date: Mar 2009 Location: USA Posts: 468 Drives: 09 370Z Red AT Sport Rep Power: 16	Dynolicious iPhone?? Any of you tried this app. yet? This app. is PocketDyno, not Dynolicious. Sorry for the confusion. I'd like to know if you think the below info is reliable. The run was done on an overcast day on a clean one-lane country road. The temp. was 70 degrees. I have a 370Z sport package with auto, shifting was done in manual mode with 1750rpm before launch. The PocketDyno autostart feature was activated. * PocketDyno™ Raceway * WELCOME TO POCKETDYNO™ RACEWAY VISIT US AT Home Run: 4 Aug 31, 2009 5:32:23 PM --------- LEFT ...... RIGHT * Car # ... 1 * Class ... Sports * * * DIAL ... * * R/T ... 0.61 * 60' ... 2.19 * 330 ... 5.71 * 1/8 ... 8.59 * MPH ... 87.18 * 1000 ... 11.08 * 1/4 ... 13.18 * MPH ... 108.55 * Left 1st AUTOSTART ON Copyright © 2008 InMotion Software, LLC 0-60 was listed as 4.70 seconds. My mods (about 4000 miles ago) are Stillen long tube intake and exhaust, and Berk HFCs. Oil change was performed 500 miles ago. My questions: 1) Why did my mods not give me a faster 0-60 than the 4.6 for autos that has been referenced on this board before? 2) Is this iPhone app. reliable? (My friend was in the car to stabilize the iPhone). 3) WHP was computed as 227!!?? Any comments are appreciated... *UPDATE* I used the DA calculator on dragtimes.com and got the following corrected results: Stock and Mildly Modified Naturally Aspirated Engines 12.918 @ 110.804 MPH *UPDATE #2* Using http://www.wallaceracing.com/0-60_equation.php, the following was the calculated 0-60 time from the 1/8 mile stats given by the PocketDyno app.: 4.07!! Last edited by marcussoori; 08-31-2009 at 08:25 PM.

08-31-2009, 07:28 PM	#3 (permalink)
Asheth Track Member Join Date: Dec 2008 Location: Glen Burnie, Maryland Posts: 917 Drives: 09 Blk 6mt Rep Power: 17	There you Go G-Tech Vs. Iphone Dynolicious Vs Mustang Dyno seems somewhat accurate. Has to be calibrated __________________ 180 customs Headlights - Yantech Backup Camera - Projekt 1 - Stillen Gen 3- EVO-R V2 Foglight, EVO-R CF Diffuser, Carbon Fiber Element Steering wheel - Fast Intentions TDX/RHFC's - RJM A.F.P. - Z1 Oil Cooler - 2015 Nismo Conversion.

08-31-2009, 07:38 PM	#4 (permalink)
racerxj17 Track Member Join Date: Apr 2009 Location: Socal Posts: 555 Drives: 09 370z Rep Power: 17	what data did u use? seems vry close __________________ 2009 PW Sport/Touring/Nav M6 Stillen Gen 3 Intake/CBE/Berk HFC/BC BR Coil over/Phillips 6500k/Hotchkis Sways/Stillen oil cooler/B&M SS

08-31-2009, 07:58 PM	#6 (permalink)
Modshack A True Z Fanatic Join Date: Mar 2009 Location: Greenville NC Posts: 2,883 Drives: 370Z Sport Rep Power: 976	Plug the right weight in? Take the spec, add Gas@ 6lb/gal Plus You...Should be in the 3500 lb range I'm guessing... __________________ Steal my car! (SOLD)...Now Porsche Cayman S Oil Cooler DIY: Here!

08-31-2009, 09:14 PM	#9 (permalink)
john370z Base Member Join Date: Jan 2009 Location: new mexico Posts: 141 Drives: 2007 335i coupe Rep Power: 283	what percent did you put as drivetrain loss? I ran 3 runs with the iphone program and here r my results: 3500 lb car 20% loss 5500 ft elevation 7AT with Stille CBE 0-30 2.72 0-60 6.27 0-100 14.46 1/4 mi 14.76 @ 97.9 mph peak hp 265 __________________ 2009 370Z, Had Berk HFC and un-installed them cuz too noisy!, Stillen CBE, 10mm rear wheel spacer, K&N drop in filters. Blower to come...

08-31-2009, 07:23 PM	#2 (permalink)
370z4Steve Base Member Join Date: Jan 2009 Location: west Posts: 231 Drives: 370z Rep Power: 672	my question is do you have dynolicious or pocket dyno? Those are (2) different programs..and between the two.. dynolicious is better reported on by quite a few over the net. Whatever you are using iphone app, G-tech, whatever device its best just to consider it in relative and not absolute terms, because it could be off from highly calibrated instruments by who knows.. but they are close within a few tenths if you input the right data on setup.

08-31-2009, 07:55 PM	#5 (permalink)
marcussoori Enthusiast Member Join Date: Mar 2009 Location: USA Posts: 468 Drives: 09 370Z Red AT Sport Rep Power: 16	PocketDyno doesn't require any inputs. Dynolicious does, I think.

08-31-2009, 09:51 PM	#11 (permalink)
john370z Base Member Join Date: Jan 2009 Location: new mexico Posts: 141 Drives: 2007 335i coupe Rep Power: 283	I must admit the runs were pretty close and I was mostly interested in getting a baseline for future mods. The results would be drastically changed if I changed the weight or % drivetrain loss. __________________ 2009 370Z, Had Berk HFC and un-installed them cuz too noisy!, Stillen CBE, 10mm rear wheel spacer, K&N drop in filters. Blower to come...

08-31-2009, 09:52 PM	#12 (permalink)
john370z Base Member Join Date: Jan 2009 Location: new mexico Posts: 141 Drives: 2007 335i coupe Rep Power: 283	The 1/4 mi mph is high for a car doing 0-60 in over 6 seconds...interesting __________________ 2009 370Z, Had Berk HFC and un-installed them cuz too noisy!, Stillen CBE, 10mm rear wheel spacer, K&N drop in filters. Blower to come...

08-31-2009, 10:49 PM	#13 (permalink)
marcussoori Enthusiast Member Join Date: Mar 2009 Location: USA Posts: 468 Drives: 09 370Z Red AT Sport Rep Power: 16	John370z, looks like you may have used dynolicious, i used pocketdyno.

08-31-2009, 10:50 PM	#14 (permalink)
marcussoori Enthusiast Member Join Date: Mar 2009 Location: USA Posts: 468 Drives: 09 370Z Red AT Sport Rep Power: 16	Also, pocketdyno doesn't have a way to input drivetrain loss. As far as I can tell...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Iphone and the 370	chrisw169	Nissan 370Z General Discussions	45	01-18-2010 09:28 AM
iPhone 3G S	Cypress	The Lounge (Off Topic)	73	11-29-2009 12:12 PM
The Z and the iPhone...	Smallywood	Nissan 370Z General Discussions	17	08-30-2009 06:41 AM
Dynolicious for iPhone?	marcussoori	Nissan 370Z General Discussions	11	04-03-2009 11:30 PM