Service Engine Soon + Limp Mode

Terrace · 02-05-2014, 05:43 PM

When I tried to start my car today @ - 10 degrees at first it would not start.
Second try it did but the Service light came on and it will only rev to 2K
rpms.Fix ? Thanks.

kenchan · 02-05-2014, 05:46 PM

-10C or -10F?

wat do you mean by 1st try did not start. did you let the car crank the entire cycle or did you lift up on your brake or?

Terrace · 02-05-2014, 05:53 PM

Ken:
-10C
First try the battery ground down but I may have let up on the start button

Bking · 02-05-2014, 06:11 PM

You don't have to hold on to the start button to start the engine. One press is all you need.

Terrace · 02-05-2014, 06:13 PM

How do I get it out of the limp mode ?

Magic Bus · 02-05-2014, 07:28 PM

Try a female Z

JWillis72 · 02-05-2014, 07:32 PM

Did you see what codes it's giving?

Terrace · 02-05-2014, 08:08 PM

I disconnected the battery for an hour but no change.The "Service Engine Soon"
light is still on and it still won't rev over 2K rpm.How do you access the code ?

Chuck33079 · 02-05-2014, 08:09 PM

Stop by an auto parts store and use their scanner.

JWillis72 · 02-05-2014, 08:18 PM

Quote:

Originally Posted by Chuck33079

Stop by an auto parts store and use their scanner.

In most it's free.

JWillis72 · 02-05-2014, 08:22 PM

Make sure you know what they are before you just clear them, the car is doing this to protect it self!

Drex · 02-05-2014, 09:02 PM

-10C is 14F. ive started my car in the same or lower temp multiple times, so temp shouldnt be a problem. although, what kind of oil are you using?

Terrace · 02-06-2014, 02:24 AM

Ester Oil.

Terrace · 02-06-2014, 04:52 PM

Good news ; I talked to my Nissan dealer and was told that it's covered as I've
only had the car under 3 years.Also as they are 500 + miles away it will be
repaired here in my town.

kenchan · 02-06-2014, 04:59 PM

GL with the repairs. and yah, 14F is warm considering where i start my cars.

02-05-2014, 05:43 PM	#1 (permalink)
Terrace Base Member Join Date: Jun 2011 Location: Canada Posts: 16 Drives: Nissan 370Z BR AT Rep Power: 14	Service Engine Soon + Limp Mode When I tried to start my car today @ - 10 degrees at first it would not start. Second try it did but the Service light came on and it will only rev to 2K rpms.Fix ? Thanks.

02-05-2014, 07:28 PM	#6 (permalink)
Magic Bus A True Z Fanatic Join Date: May 2012 Location: Honolulu Posts: 1,427 Drives: 17 6MT M2 Rep Power: 18754	Try a female Z Wonka2581 and 7speed like this.

02-05-2014, 08:09 PM	#9 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Stop by an auto parts store and use their scanner. SouthArk370Z and Ghostvette like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-05-2014, 09:02 PM	#12 (permalink)
Drex Enthusiast Member Join Date: Apr 2011 Location: Maryland Posts: 498 Drives: '11 370z MB 6MT SP Rep Power: 14	-10C is 14F. ive started my car in the same or lower temp multiple times, so temp shouldnt be a problem. although, what kind of oil are you using? __________________ 2011 Nissan 370z \| 6MT \| Magnetic Black \| Sport Package

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Limp Mode	Wabbyyy	Engine & Drivetrain	6	04-26-2013 12:08 AM
Did my car go into limp mode?	Fabsnoop	Engine & Drivetrain	9	01-25-2013 11:08 PM
Limp Mode and FI	wind.zero	Forced Induction	16	10-13-2012 06:54 PM
Limp mode @ 3.5k rpm; no cel	zilent_jay	Nissan 370Z General Discussions	56	08-28-2012 10:44 AM
Possible limp mode?	DinoJ	Nissan 370Z General Discussions	21	09-04-2009 05:17 PM

02-05-2014, 05:46 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	-10C or -10F? wat do you mean by 1st try did not start. did you let the car crank the entire cycle or did you lift up on your brake or?

02-05-2014, 05:53 PM	#3 (permalink)
Terrace Base Member Join Date: Jun 2011 Location: Canada Posts: 16 Drives: Nissan 370Z BR AT Rep Power: 14	Ken: -10C First try the battery ground down but I may have let up on the start button

02-05-2014, 06:11 PM	#4 (permalink)
Bking Enthusiast Member Join Date: Feb 2011 Location: Vancouver Posts: 298 Drives: 40th Z Rep Power: 14	You don't have to hold on to the start button to start the engine. One press is all you need.

02-05-2014, 06:13 PM	#5 (permalink)
Terrace Base Member Join Date: Jun 2011 Location: Canada Posts: 16 Drives: Nissan 370Z BR AT Rep Power: 14	How do I get it out of the limp mode ?

02-05-2014, 07:32 PM	#7 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Did you see what codes it's giving?

02-05-2014, 08:08 PM	#8 (permalink)
Terrace Base Member Join Date: Jun 2011 Location: Canada Posts: 16 Drives: Nissan 370Z BR AT Rep Power: 14	I disconnected the battery for an hour but no change.The "Service Engine Soon" light is still on and it still won't rev over 2K rpm.How do you access the code ?

02-05-2014, 08:22 PM	#11 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Make sure you know what they are before you just clear them, the car is doing this to protect it self!

02-06-2014, 02:24 AM	#13 (permalink)
Terrace Base Member Join Date: Jun 2011 Location: Canada Posts: 16 Drives: Nissan 370Z BR AT Rep Power: 14	Ester Oil.

02-06-2014, 04:52 PM	#14 (permalink)
Terrace Base Member Join Date: Jun 2011 Location: Canada Posts: 16 Drives: Nissan 370Z BR AT Rep Power: 14	Good news ; I talked to my Nissan dealer and was told that it's covered as I've only had the car under 3 years.Also as they are 500 + miles away it will be repaired here in my town.

02-06-2014, 04:59 PM	#15 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	GL with the repairs. and yah, 14F is warm considering where i start my cars.