Help Please..

iamtybaby · 02-03-2014, 05:24 PM

Hello..I have that Electronic Steering Lock issue. Its at the dealership now. 850 to fix. The part is on back order, well for this specific dealership. I called another dealership and they have 3 but they are only selling them to customers because they are so hard to come by. I am most likely going to just buy the part .Are there any threads that show me how to replace it and whats needed? I was told its not that hard but was just wondering.

Pintsize725 · 02-03-2014, 05:31 PM

IIRC, it should be free since Nissan issued a recall on the part.

1325 · 02-03-2014, 05:31 PM

Selling? Oh hell, no; that is downright dirty practice. You smack 'em in the face with this service campaign code: P3208 Campaign Announcement Campaign Bulletin NTB13-014.

kenchan · 02-03-2014, 05:33 PM

yah, check the diy section. i did a diy 2yrs ago.

but as other have noted, there is a recall for this and you shouldnt have to pay a dime. also noted on my diy.

after you get the fix, make sure you read up on the brown wire cut/fuse pull.

kenchan · 02-03-2014, 05:33 PM

btw, my diy also suggested to use pliers...

iamtybaby · 02-03-2014, 05:44 PM

Quote:

Originally Posted by kenchan

yah, check the diy section. i did a diy 2yrs ago.

but as other have noted, there is a recall for this and you shouldnt have to pay a dime. also noted on my diy.

after you get the fix, make sure you read up on the brown wire cut/fuse pull.

Im currently going back and forth with Nissan now..i actually have an 2010 Maxima(i know wrong forum,but theres no good Maxima forums like this Z forum)...They are not extending the warranty as of yet. I dont think they are going to budge and i need my car, so im going to just take care of it myself...thanks for the info

saber · 02-03-2014, 05:45 PM

Quote:

Originally Posted by iamtybaby

Im currently going back and forth with Nissan now..i actually have an 2010 Maxima(i know wrong forum,but theres no good Maxima forums like this Z forum)...They are not extending the warranty as of yet. I dont think they are going to budge and i need my car, so im going to just take care of it myself...thanks for the info though

er.....okay, you neglected that little detail

good luck, but you might be SOL since the recall didn't extend to other model years IIRC

DEpointfive0 · 02-03-2014, 06:14 PM

PM me your phone number

kenchan · 02-03-2014, 07:20 PM

Quote:

Originally Posted by DEpointfive0

PM me your phone number

jlo370z · 02-03-2014, 07:26 PM

Quote:

Originally Posted by kenchan

i think hes just trying to make new friends. though im sad he never asked me to call him

kenchan · 02-03-2014, 07:37 PM

Quote:

Originally Posted by jlo370z

i think hes just trying to make new friends. though im sad he never asked me to call him

DEpointfive0 · 02-03-2014, 07:47 PM

Jeezus... C'mon guys... You guys should know I'm pretty good at helping out forum members fúck over Nissan... Especially when it's over SLU, that's an easy one

cooltoy · 02-03-2014, 07:49 PM

They are just jealous you are Canadian.

csnow · 02-03-2014, 07:50 PM

Quote:

Originally Posted by iamtybaby

Im currently going back and forth with Nissan now..i actually have an 2010 Maxima(i know wrong forum,but theres no good Maxima forums like this Z forum)...They are not extending the warranty as of yet. I dont think they are going to budge and i need my car, so im going to just take care of it myself...thanks for the info

Did you try maxima.org?

Pintsize725 · 02-03-2014, 07:55 PM

Quote:

Originally Posted by DEpointfive0

Jeezus... C'mon guys... You guys should know I'm pretty good at helping out forum members fúck over Nissan... Especially when it's over SLU, that's an easy one

I need help getting them to replace my passenger side lower control arm under warranty.

02-03-2014, 05:24 PM	#1 (permalink)
iamtybaby Base Member Join Date: Jan 2014 Location: Baltimore Posts: 4 Drives: 2010 Nissan Maxima Rep Power: 11	Help Please.. Hello..I have that Electronic Steering Lock issue. Its at the dealership now. 850 to fix. The part is on back order, well for this specific dealership. I called another dealership and they have 3 but they are only selling them to customers because they are so hard to come by. I am most likely going to just buy the part .Are there any threads that show me how to replace it and whats needed? I was told its not that hard but was just wondering. Last edited by iamtybaby; 02-03-2014 at 05:45 PM.

02-03-2014, 05:31 PM	#2 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211844	IIRC, it should be free since Nissan issued a recall on the part. __________________ Tracie

02-03-2014, 05:33 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	btw, my diy also suggested to use pliers... alcheng, Pintsize725 and cooltoy like this.

02-03-2014, 06:14 PM	#8 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	PM me your phone number __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

02-03-2014, 07:47 PM	#12 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Jeezus... C'mon guys... You guys should know I'm pretty good at helping out forum members fúck over Nissan... Especially when it's over SLU, that's an easy one __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

02-03-2014, 05:31 PM	#3 (permalink)
1325 Enthusiast Member Join Date: Jul 2010 Location: Florida Posts: 287 Drives: 10 370Z BLK 6M Rep Power: 15	Selling? Oh hell, no; that is downright dirty practice. You smack 'em in the face with this service campaign code: P3208 Campaign Announcement Campaign Bulletin NTB13-014.

02-03-2014, 05:33 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, check the diy section. i did a diy 2yrs ago. but as other have noted, there is a recall for this and you shouldnt have to pay a dime. also noted on my diy. after you get the fix, make sure you read up on the brown wire cut/fuse pull.

02-03-2014, 07:49 PM	#13 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	They are just jealous you are Canadian. DEpointfive0 and jlo370z like this.