Stock hood alignment

GaleForce · 01-08-2014, 04:55 PM

Did you install hood struts?

TerribleONE · 01-08-2014, 04:57 PM

Quote:

Originally Posted by GaleForce

Did you install hood struts?

Not yet, but I do have a set of the kelleyfield struts ready to go on. It does look VERY similar to how some peoples hoods looked that were having issues with theirs raising the hood up.

pokeyl · 01-08-2014, 04:59 PM

I had to shim the lock on one side! First mod I did to the car!

DOOMMONKEY777 · 01-08-2014, 05:12 PM

Quote:

Originally Posted by TerribleONE

I was kind of thinking maybe it got tweeked by being held up by the hood strut for an extended period of time? (It does get propped up from the drivers side)

Unless you might have pushed on it from one end some how while it was in open position then yeah, but even in that case u can still twist it back to normal position. Or maybe ur latch is in closed position when u close the hood or defective plz chek be4 comeback.

Eagle · 01-08-2014, 10:07 PM

Those latches on either side of the hood are adjustable. You may want to try pulling out the plastic grommet, removing the plastic cover then loosen or tighten the latch little by little till it shuts correctly.

I had to do this when I installed my CF Seibon Hood. Ironically it was the driver side also that was not shutting correctly. In my case I had to loosen the latch a little bit for it to catch. This allowed the latch to drop further into the locking mechanism.

TerribleONE · 01-08-2014, 11:28 PM

Quote:

Originally Posted by Eagle

Those latches on either side of the hood are adjustable. You may want to try pulling out the plastic grommet, removing the plastic cover then loosen or tighten the latch little by little till it shuts correctly.

I had to do this when I installed my CF Seibon Hood. Ironically it was the driver side also that was not shutting correctly. In my case I had to loosen the latch a little bit for it to catch. This allowed the latch to drop further into the locking mechanism.

Thanks man didn't know if there was any adjustability. Thinking about it now all CF hoods use the stock latches so there must be some wiggle room.

01-08-2014, 04:55 PM	#16 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Did you install hood struts? __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

01-08-2014, 04:59 PM	#18 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 897 Drives: ??? Rep Power: 55	I had to shim the lock on one side! First mod I did to the car! __________________ It's not my fault I'm old, I was born a very long time ago!

01-08-2014, 10:07 PM	#20 (permalink)
Eagle Track Member Join Date: Jan 2011 Location: South Orange County, CA Posts: 885 Drives: 2011 370z Red 6MT Rep Power: 10656	Those latches on either side of the hood are adjustable. You may want to try pulling out the plastic grommet, removing the plastic cover then loosen or tighten the latch little by little till it shuts correctly. I had to do this when I installed my CF Seibon Hood. Ironically it was the driver side also that was not shutting correctly. In my case I had to loosen the latch a little bit for it to catch. This allowed the latch to drop further into the locking mechanism. TerribleONE likes this. __________________ nismo\| EVO-R High Wing \| *Stillen* Gen 3 CAI \| SEIBON TS Hood \| Z1 34 Row Oil Cooler \| VMR 810 Wheels \| Endless MX72 Pads \|*Sabelt* GT-140 Seat \|Fly1Motorsports RS1 Fenders \| Hotchkis Front Sway Bar \| Berk HFC \| Last edited by Eagle; 01-08-2014 at 10:10 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stock alignment specs?	import111	Brakes & Suspension	30	09-18-2021 04:17 PM
SPC Alignment camber & Toe kits in stock at Zspeed!	Joe@ZSpeed	Suspension/Brakes	55	06-02-2016 11:58 AM
Eibach Suspension IN STOCK \| Springs, Alignment Kits \| FREE S&H!!!	AJ@ECSMotorsports	Suspension/Brakes	68	03-10-2014 12:39 PM
2011 NISMO 370Z Hood alignment?	4FUNZ	Nissan 370Z General Discussions	11	01-24-2011 02:12 PM
Hood Alignment on 2009	ghg370z	Exterior & Interior	14	04-08-2010 11:34 AM