OBD II scanner/reader

cruzthepug · 07-30-2014, 02:50 PM

Quote:

Originally Posted by kenchan

craps. that wont work on your car most-likely.

If not, I'll jut deal with looking at the light. Put some tape over it

kenchan · 07-30-2014, 02:50 PM

on my nismo wheels im running rays' metal valve stems. looks good and more reliable than standard rubber stems.

kenchan · 07-30-2014, 02:52 PM

Quote:

Originally Posted by cruzthepug

If not, I'll jut deal with looking at the light. Put some tape over it

yah, that's exactly wat i did. i put some 3M e-tape over the light and honestly i cant even see
where it was in the cluster unless im really looking for it.

wat i did was found a countersunk screw with head diameter about the size
of the tpms light. then i cleaned the screw head, place a piece of e-tape on it,
and trimmed around the screw head with scissors for a perfectly round circle.

then used a thin L- picktool and walla.

SwissCheese · 07-09-2015, 09:56 PM

Quote:

Originally Posted by Haboob

I bought this:

Amazon.com: Autel MaxiScan MS300 CAN Diagnostic Scan Tool for OBDII Vehicles: Automotive

And it works to check and clear codes w/o issue. Quick, concise.

Sorry to bring up an old thread. I bought this code reader last week and tried using it today for the first time, and it didn't work. I plugged it in, turned the ignition to on (without starting the car), and nothing.

Am I doing something wrong? I know the unit works, because I plugged it into my Jeep and it scanned everything perfectly.

SouthArk370Z · 07-10-2015, 08:36 AM

Quote:

Originally Posted by SwissCheese

Sorry to bring up an old thread. I bought this code reader last week and tried using it today for the first time, and it didn't work. I plugged it in, turned the ignition to on (without starting the car), and nothing.

Am I doing something wrong? I know the unit works, because I plugged it into my Jeep and it scanned everything perfectly.

IIRC, the engine needs to be running. But it's been a while since I used a scanner on a 370Z.

sx moneypit · 07-10-2015, 01:10 PM

Quote:

Originally Posted by SwissCheese

Sorry to bring up an old thread. I bought this code reader last week and tried using it today for the first time, and it didn't work. I plugged it in, turned the ignition to on (without starting the car), and nothing.

Am I doing something wrong? I know the unit works, because I plugged it into my Jeep and it scanned everything perfectly.

Is the scanner not powering up? If not you need to check the power supply to the OBD connector.

SwissCheese · 07-10-2015, 09:58 PM

Quote:

Originally Posted by SouthArk370Z

IIRC, the engine needs to be running. But it's been a while since I used a scanner on a 370Z.

I'll try this tomorrow.

Quote:

Originally Posted by sx moneypit

Is the scanner not powering up? If not you need to check the power supply to the OBD connector.

Correct, the unit does not turn on at all. Is there any easy way to check that it's getting power? I don't have a voltmeter.

sx moneypit · 07-11-2015, 08:21 AM

Quote:

Originally Posted by SwissCheese

I'll try this tomorrow.

Correct, the unit does not turn on at all. Is there any easy way to check that it's getting power? I don't have a voltmeter.

A simple test light will work.According to ALLDATA it gets power from the battery power fuse number 6.

SwissCheese · 07-27-2015, 10:07 PM

Quote:

Originally Posted by sx moneypit

A simple test light will work.According to ALLDATA it gets power from the battery power fuse number 6.

Well, I tried turning the engine on and the scanner still didn't even turn on. Whats this test light you speak of?

mag_black · 07-28-2015, 05:21 PM

Quote:

Originally Posted by SwissCheese

Well, I tried turning the engine on and the scanner still didn't even turn on. Whats this test light you speak of?

I had the same issue when I bought the PLX, I changed the fuse on the Z and it worked. The fuse box is located near dead pedal foot rest on driver side floor.

SwissCheese · 07-28-2015, 09:21 PM

Quote:

Originally Posted by mag_black

I had the same issue when I bought the PLX, I changed the fuse on the Z and it worked. The fuse box is located near dead pedal foot rest on driver side floor.

I'll give this a shot.

SwissCheese · 08-04-2015, 07:58 PM

Well, I figured out what the "problem" was! Apparently the 2011+ models come with an "Extended Storage Switch" in that fuse box by the dead pedal. It comes from the factory in the 'off' position. Apparently the dealer is supposed to switch it to 'on' before they sell the car.

I pushed in the switch until it clicked, and sure enough, the OBDII scanner turned right on!

More info on the "Extended Storage Switch" can be found in this thread:

http://www.the370z.com/exterior-inte...ge-switch.html

Here's an image of the switch (snagged it from the thread I linked above):

pumpgas89 · 12-19-2016, 01:35 AM

Quote:

Originally Posted by kenchan

i use a standalone obd2 reader... cause i bought it before smartphones came into existence.

wat is android?

that was an awesome game in the 80's.

Obd Readers.... my days we used to lick the dipstick and smelled the gas coming out while listening for random clunks.

Sent from my SAMSUNG-SGH-I537 using Tapatalk

kozowh · 02-15-2017, 04:24 PM

I was looking at OBDII Scanners and the Panlong device claims not be to compatible with Nissans. Anyone know of any other devices that won't work? Are most of them equivalent or are there some favorites with additional features?

Thanks for any feedback.

SouthArk370Z · 02-15-2017, 05:57 PM

Quote:

Originally Posted by kozowh

I was looking at OBDII Scanners and the Panlong device claims not be to compatible with Nissans. Anyone know of any other devices that won't work? Are most of them equivalent or are there some favorites with additional features?

Thanks for any feedback.

All OBDII devices are electrically compatible and are able to read the basic PIDs. The Panlong unit may not have Nissan-specific info in its database.

08-04-2015, 07:58 PM	#42 (permalink)
SwissCheese Track Member Join Date: Aug 2013 Location: Iowa Posts: 785 Drives: 2012 370Z NISMO Rep Power: 67	Well, I figured out what the "problem" was! Apparently the 2011+ models come with an "Extended Storage Switch" in that fuse box by the dead pedal. It comes from the factory in the 'off' position. Apparently the dealer is supposed to switch it to 'on' before they sell the car. I pushed in the switch until it clicked, and sure enough, the OBDII scanner turned right on! More info on the "Extended Storage Switch" can be found in this thread: http://www.the370z.com/exterior-inte...ge-switch.html Here's an image of the switch (snagged it from the thread I linked above): __________________ Current Ride: 2012 Nissan 370Z NISMO #0389 Mods: Fast Intentions Resonated Test Pipes and TDX Exhaust with 18" Resonators (#1054), K&N Drop-Ins, GTR Start Button

02-15-2017, 04:24 PM	#44 (permalink)
kozowh Base Member Join Date: Jan 2014 Location: Seattle, WA Posts: 1 Drives: 14 370Z T BC M6 Rep Power: 11	Some OBDIIs incompatible with 370z? I was looking at OBDII Scanners and the Panlong device claims not be to compatible with Nissans. Anyone know of any other devices that won't work? Are most of them equivalent or are there some favorites with additional features? Thanks for any feedback.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OBD Scanner	tunafish	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	1	08-30-2013 11:05 AM
Uprev & OBDII Log Reader	flashgordon	Tuning	3	11-24-2012 11:30 AM
OBD reader problem	jpit	Nissan 370Z General Discussions	16	08-22-2012 10:14 AM
Well my car won't start, key reader warning is on...	kevr6	Exterior & Interior	102	03-24-2012 09:56 PM
How about this code reader?	Red370	Nissan 370Z General Discussions	16	01-05-2010 05:45 PM

07-30-2014, 02:50 PM	#32 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	on my nismo wheels im running rays' metal valve stems. looks good and more reliable than standard rubber stems.