2013 Z differences.

theDreamer · 07-16-2013, 12:58 PM

Quote:

Originally Posted by Chuck33079

Nope. Just pedal feel. Yank it out. It takes 15 minutes and a pair of needle nose pliers. Ten minutes out of the fifteen is contorting yourself around to get to the damn thing.

I still need to do this.

Chuck33079 · 07-16-2013, 01:10 PM

It makes a huge difference. You'll be done with it before you can finish a beer or two.

Haboob · 07-16-2013, 01:10 PM

Quote:

Originally Posted by cooltoy

Remove completely or replace?

Remove.

Quote:

Originally Posted by cooltoy

So does the removing the spring also change the engagement point as well as provide feel? Or does it just provide feel?

Feel.

theDreamer · 07-16-2013, 01:12 PM

Quote:

Originally Posted by Chuck33079

It makes a huge difference. You'll be done with it before you can finish a beer or two.

Yeah, I just forget when I get home usually.

JARblue · 07-16-2013, 01:18 PM

Quote:

Originally Posted by theDreamer

I still need to do this.

Quote:

Originally Posted by theDreamer

Yeah, I just forget when I get home usually.

I am home right now... but need to leave to go back to the office. Yet another opportunity lost

ZBro16 · 07-16-2013, 01:41 PM

Just installed my Fast Intentions exhaust on my 2013. Coming from my 2010 there are a couple things. The first thing I noticed is they deleted a hanger (someone touched on that already). As such, the OE muffler only has two hanger points as opposed to three.

What I also noticed was that I didn't have an evap canister heat shield in place. I bought mine new and it was never on the car. So I utilized the heat wrap and zip ties provided and that was that. Anyone else with a 2013 missing the heat shield?

carlitos_370z · 07-16-2013, 03:15 PM

Quote:

Originally Posted by ZBro16

Just installed my Fast Intentions exhaust on my 2013. Coming from my 2010 there are a couple things. The first thing I noticed is they deleted a hanger (someone touched on that already). As such, the OE muffler only has two hanger points as opposed to three.

What I also noticed was that I didn't have an evap canister heat shield in place. I bought mine new and it was never on the car. So I utilized the heat wrap and zip ties provided and that was that. Anyone else with a 2013 missing the heat shield?

I have to check

Haboob · 07-16-2013, 03:37 PM

Quote:

Originally Posted by ZBro16

Just installed my Fast Intentions exhaust on my 2013. Coming from my 2010 there are a couple things. The first thing I noticed is they deleted a hanger (someone touched on that already). As such, the OE muffler only has two hanger points as opposed to three.

What I also noticed was that I didn't have an evap canister heat shield in place. I bought mine new and it was never on the car. So I utilized the heat wrap and zip ties provided and that was that. Anyone else with a 2013 missing the heat shield?

Honestly, I don't remember.

I'm trying to picture it all... where at on the car? I know there were some heat shields on the bottom, but I don't think that's what you're talking about.

ZBro16 · 07-29-2013, 09:46 AM

It's a black canister on the fuel tank side. The 09-12's had them. In the FI installation guide, they actually require removal of it, and then heat wrapping the lines underneath it. I will try to dig up a picture.

Kabestro · 08-02-2013, 09:29 PM

Nope, '13 model years don't have the evap shield.

synolimit · 08-03-2013, 01:09 AM

Quote:

Originally Posted by Kabestro

Nope, '13 model years don't have the evap shield.

Then what do you call the heat shield in between the muffler and the evap in the pic?

Kabestro · 08-03-2013, 11:04 AM

Quote:

Originally Posted by synolimit

Then what do you call the heat shield in between the muffler and the evap in the pic?

The evap cover they're talking about is the one referenced in the Fast Intentions instructions that cover the hoses you see in the picture. Yes the heat shield is there (aluminum piece you see in the picture above) but the evap cover isn't (pictured here).

synolimit · 08-03-2013, 01:05 PM

Quote:

Originally Posted by Kabestro

The evap cover they're talking about is the one referenced in the Fast Intentions instructions that cover the hoses you see in the picture. Yes the heat shield is there (aluminum piece you see in the picture above) but the evap cover isn't (pictured here).

Gotcha, ill add it to the list.

07-16-2013, 01:10 PM	#47 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	It makes a huge difference. You'll be done with it before you can finish a beer or two. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any Oil Differences with 2012?	IsaacSG31	Engine & Drivetrain	4	05-22-2012 10:47 AM
Year differences	delusional	Nissan 370Z General Discussions	12	02-25-2011 11:18 AM
What are the differences between the models?	mach250	Nissan 370Z General Discussions	6	05-11-2010 10:12 AM
Dyno Differences	jpit	Tuning	2	12-02-2009 04:43 PM
Minor differences that have gone unnoticed?	JoeD	Nissan 370Z General Discussions	17	08-13-2009 10:08 AM

07-16-2013, 01:41 PM	#51 (permalink)
ZBro16 Enthusiast Member Join Date: Nov 2011 Location: Huntsville, AL Posts: 370 Drives: A Z. Rep Power: 14	Just installed my Fast Intentions exhaust on my 2013. Coming from my 2010 there are a couple things. The first thing I noticed is they deleted a hanger (someone touched on that already). As such, the OE muffler only has two hanger points as opposed to three. What I also noticed was that I didn't have an evap canister heat shield in place. I bought mine new and it was never on the car. So I utilized the heat wrap and zip ties provided and that was that. Anyone else with a 2013 missing the heat shield?

07-29-2013, 09:46 AM	#54 (permalink)
ZBro16 Enthusiast Member Join Date: Nov 2011 Location: Huntsville, AL Posts: 370 Drives: A Z. Rep Power: 14	It's a black canister on the fuel tank side. The 09-12's had them. In the FI installation guide, they actually require removal of it, and then heat wrapping the lines underneath it. I will try to dig up a picture.