No Burnouts With the A7?

birdman71 · 12-28-2015, 07:10 PM

Quote:

Originally Posted by TONY_Z34

Whats the vdc and how do you take it off? Thanks lol

Z eliminator · 12-28-2015, 10:26 PM

no problems with a 7 AT

Light them up all motor + bolt ons

z

enkei2k · 12-28-2015, 11:28 PM

Quote:

Originally Posted by SouthArk370Z

rtfm

judging by his join date + age, I doubt that is a possibility...

sx moneypit · 12-29-2015, 07:54 AM

Quote:

Originally Posted by enkei2k

judging by his join date + age, I doubt that is a possibility...

ramoszx12r · 12-29-2015, 09:03 AM

I have a 6M but I believe the 7A will smoke the tires, if you know what you are doing.

Felix 808 · 12-29-2015, 01:16 PM

And now that we are here, I think this will answer this age old question

N/370Z · 02-12-2017, 08:31 AM

Hey guys, reviving the thread again, just yesterday i tried doing a burnout in my a7

Vdc was off and it was even a little wet out, couldn't get the tires to spin at all at a stand still, i was actually able to get the tires to spin more with the vdc on, any suggestions? Im getting new tires in a week and wanna roast the tires before i get my new ones on.
Also i tired doing all this is "d", did i do it wrong and should have used the "1"? Sorry everyone im a noob to this car

jchammond · 02-12-2017, 08:37 AM

No problems drawing 2 solid black lines here either...

JARblue · 02-12-2017, 08:39 AM

Quote:

Originally Posted by N/370Z

Vdc was off and it was even a little wet out, couldn't get the tires to spin at all at a stand still, i was actually able to get the tires to spin more with the vdc on, any suggestions?

You're doing something wrong. How on earth did you get the tires to spin more with VDC ON?!?

Pretty sure there are still some nannies on that you have to overcome even with VDC off. ABLS for example applies the rear brakes when the car detects slip - you cannot turn this off without pulling the STOP LAMP fuse or installing an inline switch for the yaw sensor.

N/370Z · 02-12-2017, 08:40 AM

Quote:

Originally Posted by jchammond

No problems drawing 2 solid black lines here either...

Ive read and watched videos and honestly have no clue what im doing wrong, ive even tried brake boosting

I tried racing my buddy a few days ago with vdc off and when i took off the tires did spin a little but the vdc/"inner tc" still kicked in and stopped me from spinning

Sent from my LG-H900 using Tapatalk

N/370Z · 02-12-2017, 08:41 AM

I have a video of me trying but it wont load on these forums

Sent from my LG-H900 using Tapatalk

N/370Z · 02-12-2017, 08:47 AM

Quote:

Originally Posted by JARblue

You're doing something wrong. How on earth did you get the tires to spin more with VDC ON?!?

Pretty sure there are still some nannies on that you have to overcome even with VDC off. ABLS for example applies the rear brakes when the car detects slip - you cannot turn this off without pulling the STOP LAMP fuse or installing an inline switch for the yaw sensor.

That is probably my problem then, i did read there was a fuse i might have to pull or bypass but i was trying to avoid that lol..is it easy to install a switch for that? I would really really hate to pull my fuse just to do a simple burnout

Quote:

Originally Posted by JARblue

You're doing something wrong. How on earth did you get the tires to spin more with VDC ON?!?

Pretty sure there are still some nannies on that you have to overcome even with VDC off. ABLS for example applies the rear brakes when the car detects slip - you cannot turn this off without pulling the STOP LAMP fuse or installing an inline switch for the yaw sensor.

Sent from my LG-H900 using Tapatalk

SouthArk370Z · 02-12-2017, 10:07 AM

Quote:

Originally Posted by N/370Z

... ..is it easy to install a switch for that? ...

Search is your friend. Disabling the yaw sensor has been discussed in detail already.

N/370Z · 02-12-2017, 10:10 AM

Quote:

Originally Posted by SouthArk370Z

Search is your friend. Disabling the yaw sensor has been discussed in detail already.

I seen, i looked it up after the fact..looks like ill get to have some fun doing this lol

Sent from my LG-H900 using Tapatalk

jchammond · 02-12-2017, 10:24 AM

May not be able to handle it w/the yaw dis-connected; as it does way more than allow burnouts.

12-29-2015, 09:03 AM	#35 (permalink)
ramoszx12r Track Member Join Date: Sep 2015 Location: Carneys point NJ Posts: 665 Drives: 16 370Z Nismo White. Rep Power: 1428	I have a 6M but I believe the 7A will smoke the tires, if you know what you are doing. __________________ Tony Ramos

12-29-2015, 01:16 PM	#36 (permalink)
Felix 808 A True Z Fanatic Join Date: Oct 2011 Location: Camarillo, CA Posts: 1,063 Drives: 2011 PW/Grey T/S 7AT Rep Power: 2807	And now that we are here, I think this will answer this age old question __________________ Semper Fi Μολὼν λαβέ

02-12-2017, 08:37 AM	#38 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	No problems drawing 2 solid black lines here either... N/370Z likes this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

02-12-2017, 10:24 AM	#45 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	May not be able to handle it w/the yaw dis-connected; as it does way more than allow burnouts. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

02-12-2017, 08:31 AM	#37 (permalink)
N/370Z Base Member Join Date: Oct 2016 Location: Michigan Posts: 66 Drives: 09 370z a7 Rep Power: 9	Hey guys, reviving the thread again, just yesterday i tried doing a burnout in my a7 Vdc was off and it was even a little wet out, couldn't get the tires to spin at all at a stand still, i was actually able to get the tires to spin more with the vdc on, any suggestions? Im getting new tires in a week and wanna roast the tires before i get my new ones on. Also i tired doing all this is "d", did i do it wrong and should have used the "1"? Sorry everyone im a noob to this car

02-12-2017, 08:41 AM	#41 (permalink)
N/370Z Base Member Join Date: Oct 2016 Location: Michigan Posts: 66 Drives: 09 370z a7 Rep Power: 9	I have a video of me trying but it wont load on these forums Sent from my LG-H900 using Tapatalk