Super Low Profile Floor Jack on sale for cheap

03g35coupe6mt · 04-14-2013, 11:10 AM

Been eyeing that jack at harbor freight for a while if i didnt have 2 jacks already i would have bought one by now . i dont care how much it weighs as long as it gets under my cars nicely. it does have wheels you know lol . i have a light one if i need to transport one .Low Profile Aluminum Racing Jack - 2 Ton, Rapid Pump®

Megan370z · 04-14-2013, 12:41 PM

Quote:

Originally Posted by Sh0velMan

Several folks besides me on this forum have this jack, I think anyone that has it can attest, it's awesome for the money at full price.

Well it's on sale, with the coupon code that's on the product page it's only $109.99.

On a stock Z, this jack can reach the front center jacking point from the front bumper with no drama. For the side, it'll fit under the lowest of Z's.

Low Profile Floor Jack - 2 Ton, Rapid Pump® Jack

Check it out!

I made a post on my facebook a little while ago about that type of low profile jack !!

The lowest point of my Z was about 3'' this jack is awesome !

I just hope it will last more than 1 race season as I averaged 1-2 jack/year

It is heavy but the long reach low profile is good enough

nismonster · 04-14-2013, 02:30 PM

I just bought this at a Harbor Freight outlet and was wondering if anyone knows where to buy a compatible rubber disc for the jack? Or maybe a slotted rubber one to jack the frame rail without damaging it?

Zoren 370 · 04-14-2013, 02:34 PM

been lowered with swift springs. Still could not reach the front jacking point in the center as my sports lower lip is on the way, any where I can jack it up?
Is it safe to jack it on the lower suspension link or to the under tow hook at the end of the chassis subframe in front ? Thanks

Zoren 370 · 04-14-2013, 02:57 PM

Quote:

Originally Posted by nismonster

I just bought this at a Harbor Freight outlet and was wondering if anyone knows where to buy a compatible rubber disc for the jack? Or maybe a slotted rubber one to jack the frame rail without damaging it?

Try this one.

Performance Parts & Repair Experts for Audi, Porsche, and VW - Protech Side Lift Jack Pad - PROTECHSIDEPAD

Sh0velMan · 04-14-2013, 06:46 PM

Quote:

Originally Posted by Zoren 370

been lowered with swift springs. Still could not reach the front jacking point in the center as my sports lower lip is on the way, any where I can jack it up?
Is it safe to jack it on the lower suspension link or to the under tow hook at the end of the chassis subframe in front ? Thanks

Pull up onto a flat 2x4, you'll clear.

roy'sz · 04-15-2013, 12:27 AM

I'll add my 2cents worth. I had the rapid pump aluminum 2ton and got caught in a awkward position when I went to lower my car after installing my exhaust. I ended up blowing the seals on it and threw it away. I went down to harbor and bout the 4ton version. It is extremely heavy, however that thing Is well over-engineered for my car which is what I was shooting for. I can lift that car as high as needed for diff and trans draining as well as comfortably flushing my brake fluid. That jack is the cats meow...hope this helps.

wstar · 04-15-2013, 08:54 AM

Quote:

Originally Posted by wstar

Of all the jacks in my garage, my favorite is: BendPak LR-60 Low Rise Lift, 6,000 Lb. Capacity

Quote:

Originally Posted by doda74

How much does that cost?

Depends on the reseller. If you search google there are many available resellers, and you may want to factor in shipping costs and such (esp residential delivery on liftgate, etc). All that said, most of the public retailer quotes are in the ballpark of $1500->$2000. Well worth it, IMHO, if you have a garage bay to dedicate to it. A stock Z gets on fine. If you're lowered, you'll want to make little ramps/platforms out of wood at the ends and then it still works fine. Super easy to work on the wheel wells on this thing, and you get good enough access to the front/rear to do oil changes, diff work, and suspension work. The only thing you can't really reach is the center area around the transmission. Max lift height is only around 2 feet, but it's still better than jacks and stands, and it's about all I can raise the car anyways in a standard-height garage.

04-14-2013, 02:30 PM	#33 (permalink)
nismonster Base Member Join Date: Jun 2011 Location: Marietta, GA Posts: 177 Drives: 09 NISMO #349 Rep Power: 14	I just bought this at a Harbor Freight outlet and was wondering if anyone knows where to buy a compatible rubber disc for the jack? Or maybe a slotted rubber one to jack the frame rail without damaging it? __________________ SOLD 2009 MB Nismo # 349 \| Persimmon Touring Interior \| Whiteline Diff Bushings \| ZSpeed HD CSC \| SPL Rear Camber Links\| Michelin AS3 \| WickedCAS \| JL 13tw5-3 \| JL JX1000.1 \| Pioneer AVIC-X910BT

04-15-2013, 12:27 AM	#37 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	I'll add my 2cents worth. I had the rapid pump aluminum 2ton and got caught in a awkward position when I went to lower my car after installing my exhaust. I ended up blowing the seals on it and threw it away. I went down to harbor and bout the 4ton version. It is extremely heavy, however that thing Is well over-engineered for my car which is what I was shooting for. I can lift that car as high as needed for diff and trans draining as well as comfortably flushing my brake fluid. That jack is the cats meow...hope this helps. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
best floor jack for working on front and rear of 370z	gsxr750	Nissan 370Z General Discussions	35	09-12-2013 10:28 PM
370Z on homemade wooden ramps & low profile jack pics	gsxr750	Nissan 370Z General Discussions	0	10-28-2012 05:40 PM
Jack Stands / Floor Jack	ronaldr911	Exterior & Interior	31	01-10-2012 01:50 PM
cheap floor mats	40thQuartz	40th Anniversary 370Z	8	10-05-2011 08:57 AM
low profile jack for lowered z	jasonhoutx	Nissan 370Z General Discussions	4	06-27-2009 09:38 PM

04-14-2013, 11:10 AM	#31 (permalink)
03g35coupe6mt Base Member Join Date: Aug 2010 Location: East Stroudsburg Pa Posts: 183 Drives: 2010 Z / 2003 G35cp Rep Power: 15	Been eyeing that jack at harbor freight for a while if i didnt have 2 jacks already i would have bought one by now . i dont care how much it weighs as long as it gets under my cars nicely. it does have wheels you know lol . i have a light one if i need to transport one .Low Profile Aluminum Racing Jack - 2 Ton, Rapid Pump®

04-14-2013, 02:34 PM	#34 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	been lowered with swift springs. Still could not reach the front jacking point in the center as my sports lower lip is on the way, any where I can jack it up? Is it safe to jack it on the lower suspension link or to the under tow hook at the end of the chassis subframe in front ? Thanks