My ECM replacement (high pitched whine) was denied

Limeybastard · 05-02-2014, 09:18 AM

Quote:

Originally Posted by Sh0velMan

lol.

TB whine is totally normal, I hope you guys aren't bothering a service dept over that.

No, not me. The less a person fidgets with my car the best it is. Me including LOL

JARblue · 05-02-2014, 09:30 AM

Quote:

Originally Posted by fitxpert

I had my ECM replaced and still experienced the whine. Did a little further reading and did a little testing and realized it's the THROTTLE BODIES. Here is how you can tell if the noise is coming from your throttle bodies or ECM.

Pop your hood.
Put the car in Neutral.
Set ignition to ON.
Roll your windows down.

At this point...it should be silent.
Now put the car into gear. I usually go with 2nd. You should hear the whine start right away.
Now put your ear near each throttle body and confirm. I could hear each throttle body whining.

I had my service manager convinced it was the ECM...and it turns out that wasn't the problem. Here is a video of the noise well. Car is in gear.

Throttle Body Whine

Sorry but I've never heard a silent internal combustion engine

Sure I've heard the noise, and I don't have to put my ear next to the throttle bodies. Is it indicative of anything wrong? Absolutely not.

Enjoy the hassle of the dealer trying to get them to troubleshoot something that is completely normal. On the plus side, they might break something unrelated, so you need their service for real

Sh0velMan · 05-02-2014, 09:38 AM

The TBs are never silent.

They are quiet(er) when they are new, but as they age and break in the noise becomes more prevalent. This is due to how they work, they're little DC motors that are having to hold the TB open against a spring. This creates vibrations that become more audible as the bearings wear in.

There's seriously nothing to fix until the TBs begin to malfunction from bearing play or (more likely to be an issue first) the brushes wear out/get too dirty to function and the TB has to be serviced (replaced by the dealer, no one fixes them, they just R&R and send it off to be "recycled", but I have personally refurbed DBW TBs in my garage without issue).

Again, it's a non issue and you can only hear it on this car more than others because the TBs are front and center, not covered up by feet of equipment to muffle the sound (and there's two of them).

Sh0velMan · 05-02-2014, 09:46 AM

OH, and because this is one of the few cars without an under-hood heat and sound insulating pad.

If it had a half inch thick pad to absorb engine bay sounds you wouldn't hear the TBs at all.

Nissan (incorrectly, apparently) assumed sports car owners wouldn't care that they could hear TB whine, relay chatter and other mechanical noises from their engine bays and decided to save that space that would be needed so they could make the hood lower profile, thus improving aerodynamics and aesthetics.

Chuck33079 · 05-02-2014, 09:49 AM

Quote:

Originally Posted by Sh0velMan

OH, and because this is one of the few cars without an under-hood heat and sound insulating pad.

If it had a half inch thick pad to absorb engine bay sounds you wouldn't hear the TBs at all.

Nissan (incorrectly, apparently) assumed sports car owners wouldn't care that they could hear TB whine, relay chatter and other mechanical noises from their engine bays and decided to save that space that would be needed so they could make the hood lower profile, thus improving aerodynamics and aesthetics.

Dynomat makes an underhood liner product for people who don't want to hear these kinds of noise.

Sh0velMan · 05-02-2014, 09:52 AM

Quote:

Originally Posted by Chuck33079

Dynomat makes an underhood liner product for people who don't want to hear these kinds of noise.

Perfect.

FWIW, the G37 has a pad, it also has a bulkier hood and no strut tower brace.

The VQ37 is a tall motor, they had to min-max the entire design to meet design goals, random noises are a small compromise.

cheshirecat · 05-02-2014, 09:52 AM

this is the first time I've heard of people complaining about throttle body whine in a modern car

Chuck33079 · 05-02-2014, 10:08 AM

Amazon.com: Thermo-Tec 14620 60" X 36" Heat and Sound Suppressor: Automotive

That would be my first choice. The Dynamat one is thicher, so you may have to do more trimming and shaving the foam down.

Dynamat.com | The Hoodliner for Automotive and Restoration

05-02-2014, 09:38 AM	#18 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	The TBs are never silent. They are quiet(er) when they are new, but as they age and break in the noise becomes more prevalent. This is due to how they work, they're little DC motors that are having to hold the TB open against a spring. This creates vibrations that become more audible as the bearings wear in. There's seriously nothing to fix until the TBs begin to malfunction from bearing play or (more likely to be an issue first) the brushes wear out/get too dirty to function and the TB has to be serviced (replaced by the dealer, no one fixes them, they just R&R and send it off to be "recycled", but I have personally refurbed DBW TBs in my garage without issue). Again, it's a non issue and you can only hear it on this car more than others because the TBs are front and center, not covered up by feet of equipment to muffle the sound (and there's two of them). __________________ Buy My Car! \| Build Thread

05-02-2014, 09:46 AM	#19 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	OH, and because this is one of the few cars without an under-hood heat and sound insulating pad. If it had a half inch thick pad to absorb engine bay sounds you wouldn't hear the TBs at all. Nissan (incorrectly, apparently) assumed sports car owners wouldn't care that they could hear TB whine, relay chatter and other mechanical noises from their engine bays and decided to save that space that would be needed so they could make the hood lower profile, thus improving aerodynamics and aesthetics. Chuck33079 likes this. __________________ Buy My Car! \| Build Thread

05-02-2014, 10:08 AM	#23 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Amazon.com: Thermo-Tec 14620 60" X 36" Heat and Sound Suppressor: Automotive That would be my first choice. The Dynamat one is thicher, so you may have to do more trimming and shaving the foam down. Dynamat.com \| The Hoodliner for Automotive and Restoration __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1st Gear high pitched whine, and super high pitched whine downshifting into first	wdkwang	Engine & Drivetrain	18	04-10-2013 04:55 PM
high pitched noise	duderevs	Nissan 370Z General Discussions	20	12-18-2012 03:49 AM
High-Pitched Frequency Update	Silver37	Nissan 370Z General Discussions	198	11-10-2011 12:32 PM
2010 OWNERS- high pitched whine?	SE	Nissan 370Z General Discussions	3	04-19-2010 05:36 PM
POLL: High-Pitched Noise: You Have It?	marcussoori	Nissan 370Z General Discussions	33	04-08-2010 04:47 PM

05-02-2014, 09:52 AM	#22 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 293	this is the first time I've heard of people complaining about throttle body whine in a modern car