Time to move on

elmz · 03-15-2013, 01:46 PM

Quote:

Originally Posted by Darryl79

Definitely! I've always been curious about them, and this model in particular looks bad a s s to me, so I said, "why not?".

I just gave the car back to BMW today to detail since I took it home the first night without a proper take home wash and wax, so initially my first thoughts are...

Pulls very decently. Smooth trans (AT). It's a lot quieter (by my aging ears), takes the many potholes and rough roads a lot smoother then the Z. It's nice to have a back seat again, even if I can't fit normal sized adults in there for more then quick jaunts. I have a TRUNK, and a big one at that. Only been able to drive it probably 2 hrs in the less then 24 I had it.

The bad, or perceived bad...

It's not a Z. The Z is a special kind of car. The stereo is very non-standard, so my Kenwood DNX9990 or whatever it is won't fit. There are too many bells and whistles I need to figure out, but once I do I'm sure it will enhance my comfort or convenience.

That's it so far. Like this site was, I have a lot of reading and questions to search out before I begin to mod the car. BMW wanted $495 to tint the car, I thought that was a little much to be honest.

Thanks! Enjoy your new ride

UNKNOWN_370 · 03-15-2013, 02:04 PM

[QUOTE=DOOMMONKEY777;2212800]

Quote:

Originally Posted by UNKNOWN_370

Dude, Are you just writing for the sake of writing right???

Dude i dont post alot and when i do i mean what i say.

Quote:

Originally Posted by DOOMMONKEY777

Lmao...youll be back in no time to the z, those bemmers are like a gentle fairy car, just shifting it makes me feel like ill brake the knob off, plus they brake too quick, its a fact. My friend had a 135i n55 engine or n54 the one with a single twinscroll turbo so he jb4-ed it + intake + intercooler+ downpipe+ tune. Drove nice but not Z nice. I think it was at 17 psi boost anywhoo out of about 24k miles he had that boost for about 800 miles and then the car just broke down, clutch went, problems starting the car wiers burning, bolts dropping out i mean we took it apart and put it together like 6 times to make sure that everything is bolted right and all, still new things kept going wrong. In the end he whent out and bought '13 black Z happy as a pervert in a ladies dressing room in a stock car. So if you wanna go there we will be waiting for you back here

So BMW's have faulty knobs?

What is braking to soon? I'm so confused there.

The rest of it, from what was barely legible... Just sounds like your friend doesn't know how to mod and screwed a lot of shyt up himself..

I know the TT N54 was unreliable. But the N55 TSST??? There's a lot of holes in this. I'm far from a Bimmer fan but... There's a lot off here.

tjlazer · 03-15-2013, 03:22 PM

Quote:

Originally Posted by onzedge

Good luck and thank you for your 34 posts.

He was the mighty god of lurking. LOL

onzedge · 03-15-2013, 03:50 PM

Quote:

Originally Posted by tjlazer

He was the mighty god of lurking. LOL

obito · 03-17-2013, 03:29 PM

you should get the M series !!!! however, good luck hope to see you bounce back to Z again with 2013 Nismo or 2013 with AMS kit because it is very different scenario between driving Z compare to BMW 3.

Eagle · 03-17-2013, 04:23 PM

Later bro. Enjoy the bimmer, don't forget your Z brethren at this forum.

Mt Tam I am · 03-18-2013, 12:24 AM

A new car every year. Nice.

Magic Bus · 03-18-2013, 02:36 AM

Aloha & Enjoy that 335. Give me a shaka sign if we pass each other so I no it's you

LakeShow · 03-18-2013, 02:38 AM

Good luck!

A-Train · 03-19-2013, 05:49 AM

Good luck with a Bimmer, bro. You do realize that they have atrocious reliability ratings and are insanely expensive to service, right? FYI, brake job per axle at BMW dealer is $1,200. Waterpump replacement = $1,200. Run-Flat tires=$450 a piece. Oil change=$150, etc., etc.

Montez · 03-19-2013, 05:59 PM

If I were to do that I would have looked for an 11 335is (kinda pricey though), as you get some M stuff with that. You get that dual clutch tranny, better suspension, more power and the 6 or 7 sec extra power boost unique to the is that takes torque up to 370 lb-ft is amazing.

Bking · 03-19-2013, 06:14 PM

have fun with the n55 engine! My friend has a n54 and he says the n55 are much more reliable and therefore still used in current models.

Airwalk · 03-19-2013, 07:53 PM

Darn hate to see you go brother, but like many of us said stay with us an check up on the community. I swear this is the most helpful bunch of people that I have met online. Were can you PM a total stranger, get sound good advice, and throught it all actually have people care about you and your ride with the great feedback. It's pretty special man and hope to see you post soon.

cheshirecat · 03-20-2013, 11:06 AM

Quote:

Originally Posted by Bking

have fun with the n55 engine! My friend has a n54 and he says the n55 are much more reliable and therefore still used in current models.

I dunno- the N54 is a pretty stout engine. Forged internals- problems are very rare with the engine itself even with high (15+) psi of boost.

The platform does have other issues though.

-High pressure fuel pump failures (recalled)
-water pump replacements (electrical unit that stays on to cool the turbos after the engine is turned off, wear and tear item, 60k miles est)
-carbon build-up (estimate a walnut shell blasting every 50k miles)
- turbo wastegate rattle (bmw warranty covered to 120k miles)

In my opinion, it's an excellent engine, but be prepared to pay for the maintenance. I'd personally take the n54 over the n55 any day.

03-18-2013, 12:24 AM	#37 (permalink)
Mt Tam I am A True Z Fanatic Join Date: Jun 2010 Location: California Posts: 10,709 Drives: 370Z T/S/N 6MT & XKE Rep Power: 3843	A new car every year. Nice. __________________ "Does the carpet match the drapes? NO!!! I don't date bald women." Nissan Motorsports 34R Oil Cooler. Stillen CBE. Hotchkis Sport Sway Bars. KW Variant 3 Coilover System. Stillen Gen3 CAI. Michelin Pilot Super Sport. Stillen Brake Ducts. Carbotech™ XP10/XP8 Pads. Z1 Front Rotors. Z1 Stainless Brake Lines. Two degrees of camber

03-18-2013, 02:38 AM	#39 (permalink)
LakeShow A True Z Fanatic Join Date: Dec 2010 Location: L.I., NY Posts: 5,307 Drives: Everything Rep Power: 25	Good luck! __________________ \|2013 Audi S4\|Ibis White/Black\|S-Tronic P+\| \|2013 370z\|PearlWhite/Persimmon\|Touring/Sport/Nav\|F.I. CBE 18" CF\| \|Sold\|2011 370z\|Gun Metallic\|Touring/Sport/Nav\|

03-19-2013, 05:49 AM	#40 (permalink)
A-Train Base Member Join Date: Mar 2012 Location: Seattle Posts: 41 Drives: 2011 370Zed Rep Power: 13	Bring More Wallets Good luck with a Bimmer, bro. You do realize that they have atrocious reliability ratings and are insanely expensive to service, right? FYI, brake job per axle at BMW dealer is $1,200. Waterpump replacement = $1,200. Run-Flat tires=$450 a piece. Oil change=$150, etc., etc.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Time to move out of Novice class? SCCA	EazyD	Track / Autocross / Drifting / Dragstrip	7	07-12-2012 10:20 PM
maybe a stupid move?	dhkim5599	Nissan 370Z General Discussions	28	05-23-2011 10:56 PM
Move your car !!!	John Bradley	Nissan 370Z General Discussions	30	11-01-2010 12:25 AM
IPL -- Interesting move by Nissan?	nuTinmuch	Nissan 370Z General Discussions	13	05-25-2010 10:47 PM
Your Most Ridiculous OCD Move	OldGuy	Nissan 370Z General Discussions	45	03-06-2010 06:28 PM

03-17-2013, 03:29 PM	#35 (permalink)
obito Base Member Join Date: Aug 2012 Location: San Antonio, TX Posts: 94 Drives: 370Z Rep Power: 13	you should get the M series !!!! however, good luck hope to see you bounce back to Z again with 2013 Nismo or 2013 with AMS kit because it is very different scenario between driving Z compare to BMW 3.

03-17-2013, 04:23 PM	#36 (permalink)
Eagle Track Member Join Date: Jan 2011 Location: South Orange County, CA Posts: 885 Drives: 2011 370z Red 6MT Rep Power: 10656	Later bro. Enjoy the bimmer, don't forget your Z brethren at this forum.

03-18-2013, 02:36 AM	#38 (permalink)
Magic Bus A True Z Fanatic Join Date: May 2012 Location: Honolulu Posts: 1,427 Drives: 17 6MT M2 Rep Power: 18754	Aloha & Enjoy that 335. Give me a shaka sign if we pass each other so I no it's you

03-19-2013, 05:59 PM	#41 (permalink)
Montez Track Member Join Date: Sep 2009 Location: Manhattan Beach, Ca Posts: 604 Drives: 16 LEX GS,09 Z,03Max Rep Power: 17	If I were to do that I would have looked for an 11 335is (kinda pricey though), as you get some M stuff with that. You get that dual clutch tranny, better suspension, more power and the 6 or 7 sec extra power boost unique to the is that takes torque up to 370 lb-ft is amazing.

03-19-2013, 06:14 PM	#42 (permalink)
Bking Enthusiast Member Join Date: Feb 2011 Location: Vancouver Posts: 298 Drives: 40th Z Rep Power: 14	have fun with the n55 engine! My friend has a n54 and he says the n55 are much more reliable and therefore still used in current models.

03-19-2013, 07:53 PM	#43 (permalink)
Airwalk Base Member Join Date: Feb 2013 Location: norristown Posts: 52 Drives: 2009 Nismo 370Z Rep Power: 12	Darn hate to see you go brother, but like many of us said stay with us an check up on the community. I swear this is the most helpful bunch of people that I have met online. Were can you PM a total stranger, get sound good advice, and throught it all actually have people care about you and your ride with the great feedback. It's pretty special man and hope to see you post soon.