best floor jack for working on front and rear of 370z

gomer_110 · 10-27-2012, 08:56 PM

Quote:

Originally Posted by Felix 808

This is the jack I thought was being talked about.
It is very good with the attributes I stated earlier

Low Profile Floor Jack - 2 Ton, Rapid Pump® Jack

( Click to show/hide )

Also an owner of this jack and it does a great job.

If you have buckets of money just sitting around you could always get this:
Dannmar: MaxJax

TheGreatOne · 10-27-2012, 11:42 PM

Hmmm, liking that low profile jack...maybe when I move and have an nice garage.

Right now I have some regular Goodyear hydraulic jack, I need to use the stock jack first to get the car up a bit, then I can slide the other jack under

gsxr750 · 10-28-2012, 02:55 AM

I just got done making the wooden ramps, from 2 x 10 planks, pretty simple and they work great, I can even slide my standard 3 ton craftsmen floor jack under the front cross member now and I may not even need the new low profile jack.

Ramps are made from 1 qty - 2 x 10 x 50" long with one beveled edge and 1 qty. 2 x 10 x 36" long with one beveled edge and 1 qty 2 x 10 x 4" wide piece as a wheel stopper.

Place 36 " plank on top of the 50" plank leaving 14 inches for the front wheel to engage the first level and place the 4" wide wheel stop at 36 inches from the start of the ramp, then simply screw everything together with 2 1/2 " wood screws.

Repeat the same steps for the second ramp and materials list.

Will post pics sunday.

Zoren 370 · 10-28-2012, 03:25 AM

Very nice thread!!! Where's the best place to put the OEM jack in front to lift the car? Thanks

Trips · 10-28-2012, 03:30 AM

Quote:

Originally Posted by Zoren 370

Very nice thread!!! Where's the best place to put the OEM jack in front to lift the car? Thanks

Your supposed to use the notches on the frame rail for proper placement of the oem jack pic 1 front , pic 2 rear

Zoren 370 · 10-28-2012, 03:35 AM

Thanks Triple.

Red_Z · 02-07-2013, 03:40 PM

Bringing this back up.....

For ppl with the HF jack....do you still need to use woork plank before you jack the car up from front and rear?? The jack is on sale now for 79.99. Looking to get one if I don't need to put the car on ramp before jacking the car up.

gomer_110 · 02-07-2013, 04:45 PM

Even the HF low profile jack can't get the front of my Nismo without some additional assistance. Sides and rear though the jack is all I need.

Felix 808 · 02-07-2013, 07:58 PM

Quote:

Originally Posted by Red_Z

Bringing this back up.....

For ppl with the HF jack....do you still need to use woork plank before you jack the car up from front and rear?? The jack is on sale now for 79.99. Looking to get one if I don't need to put the car on ramp before jacking the car up.

I think you are looking at the wrong Jack, This jack never goes cheaper than $129 normally $150 The one I'm Talking about Low Profile Floor Jack - 2 Ton, Rapid Pump® Jack & the one your thinking of Floor Jack With Rapid Pump®, 2.5 Ton Heavy Duty Steel Get the lower longer more expensive one & you will have no trouble if you use the side jack points. I am lowered on Swifts & have no problem with this jack. I also use this with the jack.

Sidelift Jack Pad - MODEL #1006

L33T Z34 · 02-14-2013, 06:51 AM

Wooden ramps and my milwaukee hydraulics 40 work fine.

Red_Z · 09-12-2013, 01:48 PM

Bringing this back...I am looking for a new jack.

What is the different between the one mertioned on top and Floor Jack With Rapid Pump®, 2.5 Ton Heavy Duty Steel

The 2.5 ton one looks cheaper and better

Arrvaxx · 09-12-2013, 01:50 PM

Quote:

Originally Posted by binary0x01

You can drive the car on a piece of wood that's 2 or so inches tall and that will let you get the jack under there np.

That's what I do then use jack stands.

Felix 808 · 09-12-2013, 05:29 PM

Quote:

Originally Posted by Red_Z

Bringing this back...I am looking for a new jack.

What is the different between the one mertioned on top and Floor Jack With Rapid Pump®, 2.5 Ton Heavy Duty Steel

The 2.5 ton one looks cheaper and better

Read 2 post up

speedfreek · 09-12-2013, 05:35 PM

Quote:

Originally Posted by Red_Z

Bringing this back...I am looking for a new jack.

What is the different between the one mertioned on top and Floor Jack With Rapid Pump®, 2.5 Ton Heavy Duty Steel

The 2.5 ton one looks cheaper and better

I have the 2.5 ton jack. I am lowered on Swifts and it easily clears the side skirts.

Dwight Frye · 09-12-2013, 07:47 PM

Watch your junk mail or advertisements in various magazines for Harbor Freight ads too. They often have coupons for 20% off which helps on a $140 jack.

10-27-2012, 11:42 PM	#17 (permalink)
TheGreatOne A True Z Fanatic Join Date: Jan 2011 Location: Montreal, Canada Age: 47 Posts: 1,980 Drives: E60 BMW M5 Rep Power: 22	Hmmm, liking that low profile jack...maybe when I move and have an nice garage. Right now I have some regular Goodyear hydraulic jack, I need to use the stock jack first to get the car up a bit, then I can slide the other jack under __________________ 2017 SUBARU STI 2008 E60 M5 - SOLD 2010 40th Anniversary 370Z - SOLD (and missing her)

02-07-2013, 04:45 PM	#23 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	Even the HF low profile jack can't get the front of my Nismo without some additional assistance. Sides and rear though the jack is all I need. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jack Stands / Floor Jack	ronaldr911	Exterior & Interior	31	01-10-2012 02:50 PM
[FOR SALE] 370Z OEM Front Floor Mats	woodsjo3	Parts for sale (Private Classifieds)	2	08-13-2011 10:11 AM
head front jack	bigZ	Audio & Video	7	04-08-2011 09:42 AM
FS: OEM Genuine Nissan 370Z rear trunk cargo floor mat	Steven	Parts for sale (Private Classifieds)	2	02-22-2011 04:20 PM
370z Rear hatch area floor mat $60 shipped	USMCASA	Parts for sale (Private Classifieds)	2	03-01-2010 03:02 AM

10-28-2012, 02:55 AM	#18 (permalink)
gsxr750 Enthusiast Member Join Date: Jan 2012 Location: west Posts: 443 Drives: 2012 370z man. sport Rep Power: 14	I just got done making the wooden ramps, from 2 x 10 planks, pretty simple and they work great, I can even slide my standard 3 ton craftsmen floor jack under the front cross member now and I may not even need the new low profile jack. Ramps are made from 1 qty - 2 x 10 x 50" long with one beveled edge and 1 qty. 2 x 10 x 36" long with one beveled edge and 1 qty 2 x 10 x 4" wide piece as a wheel stopper. Place 36 " plank on top of the 50" plank leaving 14 inches for the front wheel to engage the first level and place the 4" wide wheel stop at 36 inches from the start of the ramp, then simply screw everything together with 2 1/2 " wood screws. Repeat the same steps for the second ramp and materials list. Will post pics sunday.

10-28-2012, 03:25 AM	#19 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Very nice thread!!! Where's the best place to put the OEM jack in front to lift the car? Thanks

10-28-2012, 03:35 AM	#21 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Thanks Triple.

02-07-2013, 03:40 PM	#22 (permalink)
Red_Z Enthusiast Member Join Date: May 2012 Location: California Posts: 332 Drives: A red Z Rep Power: 15	Bringing this back up..... For ppl with the HF jack....do you still need to use woork plank before you jack the car up from front and rear?? The jack is on sale now for 79.99. Looking to get one if I don't need to put the car on ramp before jacking the car up.

02-14-2013, 06:51 AM	#25 (permalink)
L33T Z34 Banned Join Date: Jun 2010 Location: Ahnald, MO Age: 47 Posts: 387 Drives: 09 K51 G C Bw/S 6MT Rep Power: 0	Wooden ramps and my milwaukee hydraulics 40 work fine.

09-12-2013, 01:48 PM	#26 (permalink)
Red_Z Enthusiast Member Join Date: May 2012 Location: California Posts: 332 Drives: A red Z Rep Power: 15	Bringing this back...I am looking for a new jack. What is the different between the one mertioned on top and Floor Jack With Rapid Pump®, 2.5 Ton Heavy Duty Steel The 2.5 ton one looks cheaper and better

09-12-2013, 07:47 PM	#30 (permalink)
Dwight Frye Enthusiast Member Join Date: Jul 2009 Location: Occupied California Posts: 423 Drives: '09 Tour/Sport/6MT Rep Power: 16	Watch your junk mail or advertisements in various magazines for Harbor Freight ads too. They often have coupons for 20% off which helps on a $140 jack.