Spawn Aerodynamics - Bullittes CF build thread.

SpawnAeroJohn · 07-10-2009, 07:52 PM

^ Who made his hood?

Shunya · 07-14-2009, 09:20 AM

Looking really good

keep up the good work!
Vented wide fenders would be sexy~!

SpawnAeroJohn · 07-15-2009, 01:19 PM

Just wanted to let everybody know the car was picked up saturday with no parts. Our suppliers sent us bad resin so we had to trash those parts we made (not the molds, the carbon fiber parts only) and we had to get new resin. We just got a few samples of resin last week to try and see what would work best for us and so far it looks like we have exactly what we need. We are working on his parts and with in the next week (give or take a few days) we will be sending him parts starting with the CF roof, b pillars, front bumper overlay, and rear valence overlay.

Just an FYI because I dont want anybody getting the wrong ideas.

Once he gets all the parts he will post pictures when he has a chance. We how ever will post pictures of the parts here at our shop but we cant control when he takes pictures. Bullitt wanted to get a good amount of parts on before he took pictures from what I was told. Stay tuned!

Modshack · 07-15-2009, 05:11 PM

Quote:

Originally Posted by SpawnAeroJohn

Just an FYI because I dont want anybody getting the wrong ideas.

I'm afraid, with this Resin Fiasco, that i've already gotten the wrong idea. You guys are making things I'm interested in buying, but it seems like it's the first time you've done all this. My advice is to shoot final shots of the products Only, to present your products in a finished form. No doubt you'll do lots of business here, but so far all I have is questions as to the real quality of your finished parts...

SpawnAeroJohn · 07-15-2009, 08:09 PM

Dont be at all my friend! Before we did small honda parts and stuff like mouse pads and cup coasters where nobody wanted to pay anything so we used polyester resin that we had no doubt they would not last since they were small parts that barely touched heat. But now since we do much higher quality products for higher quality cars we switched to an epoxy system and with out testing anythign we thought the epoxy would work well because we were told it was amungst the highest quality. Turns out they found out that they were wrong and told us only after we made a few pieces. That is why we spent the next week and a half after that trying other epoxies. Right now we are using some that so far have been tested up to 300F and shows no signs of falling appart. Average sun temp gets to 140 - 153 at 90F weather.

Not only that we clear coat our parts with dupont automotive clear and guarantee all of our work for life

Mike · 07-15-2009, 10:02 PM

First of all, I wish you the best success.

All I think Steve was saying is that it might have been better to wait until you had the product ready to go before marketing it. However, I also really like seeing the development part too, and you guys showing that you won't put out a sub par product also means a lot. I've seen several vendors on other forums do similar stuff with upcoming products and then never follow through. They get a lot of interest up front, but then lose their rep and noone wants to deal with them when they finally do come through.

CF isn't for me (well maybe the FI Exhaust, for the weight diff), but if after everything is said and done, you get it right, I wouldn't hesitate to buy from you.

bboypuertoroc · 07-16-2009, 04:17 AM

Awesome thread is awesome.

tvfreakazoid · 07-16-2009, 07:07 AM

Can you let us know how much of a weight difference this will be in the end?

Quote:

Originally Posted by SpawnAeroJohn

Great Johnny!

Yeah when they told me they have resins that can hold up to 180. I chuckled and said 153 is average in the sun temperature for chicago. Imagine anything south / west. The minimum has got to be at least 200. And thats just for the parts that arent near the engine. Hoods, fenders, etc have to be able to withstand at least 400.

SpawnAeroJohn · 07-16-2009, 09:27 AM

Sure can!

tvfreakazoid · 07-17-2009, 06:25 AM

Sweeeet!

hellogoodbye · 07-18-2009, 09:13 PM

nice job :P i might be getting those parts lol

shadspimp · 07-18-2009, 10:01 PM

John anything else close to finished, or in the works right now that we'll see in the next couple days?

SpawnAeroJohn · 07-19-2009, 02:43 PM

This new week Ill be sending b pillars, front bumper license overlay, and a rear valence to bullitt. Then after we finish these 3 we will be making the roof. We have to finish the vented hood then show you guys, create the mold and then out of that mold make bullittes hood. And we are still looking for a local person to come down so we can create a mold of the reverse side of the hatch. We didnt have time to make both sides of the hatch mold

...

We are also finishing the spoiler prototype.

Endgame · 07-19-2009, 04:57 PM

cool

Scribe · 07-24-2009, 02:21 PM

Any updates on this?

07-15-2009, 08:09 PM	#125 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 17	Dont be at all my friend! Before we did small honda parts and stuff like mouse pads and cup coasters where nobody wanted to pay anything so we used polyester resin that we had no doubt they would not last since they were small parts that barely touched heat. But now since we do much higher quality products for higher quality cars we switched to an epoxy system and with out testing anythign we thought the epoxy would work well because we were told it was amungst the highest quality. Turns out they found out that they were wrong and told us only after we made a few pieces. That is why we spent the next week and a half after that trying other epoxies. Right now we are using some that so far have been tested up to 300F and shows no signs of falling appart. Average sun temp gets to 140 - 153 at 90F weather. Not only that we clear coat our parts with dupont automotive clear and guarantee all of our work for life Last edited by SpawnAeroJohn; 07-15-2009 at 08:12 PM.

07-15-2009, 10:02 PM	#126 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	First of all, I wish you the best success. All I think Steve was saying is that it might have been better to wait until you had the product ready to go before marketing it. However, I also really like seeing the development part too, and you guys showing that you won't put out a sub par product also means a lot. I've seen several vendors on other forums do similar stuff with upcoming products and then never follow through. They get a lot of interest up front, but then lose their rep and noone wants to deal with them when they finally do come through. CF isn't for me (well maybe the FI Exhaust, for the weight diff), but if after everything is said and done, you get it right, I wouldn't hesitate to buy from you. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

07-16-2009, 04:17 AM	#127 (permalink)
bboypuertoroc Enthusiast Member Join Date: Dec 2008 Location: Get out my way pimpin, HI Posts: 419 Drives: '06 Evo IX GSR Rep Power: 389	Awesome thread is awesome. __________________ Evo IX GSR - FPBlack, 30psi... 10's on pump? Let's find out...

07-17-2009, 06:25 AM	#130 (permalink)
tvfreakazoid A True Z Fanatic Join Date: Jan 2009 Location: kommie kali Posts: 1,238 Drives: 2015 Audi S5; 6spd. Rep Power: 10324	Sweeeet! __________________ Mudders milk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Our first 370Z build.	Jeff Smith	Audio & Video	68	04-15-2011 07:36 PM
Offical build your Z34 thread	cstr_Cali	Nissan 370Z General Discussions	68	07-16-2009 08:01 PM
Month and Date for build	sandy741	Nissan 370Z General Discussions	10	06-16-2009 01:26 AM
Build your own - 370Z	4MYZ370	Nissan 370Z Pricing / Ordering Discussions	22	02-10-2009 08:35 PM
You can build it..	bossman	Nissan 370Z General Discussions	1	01-03-2009 06:31 PM

07-10-2009, 07:52 PM	#121 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 17	^ Who made his hood?

07-14-2009, 09:20 AM	#122 (permalink)
Shunya A True Z Fanatic Join Date: May 2009 Location: Vancouver Posts: 3,069 Drives: You Crazy! Rep Power: 22	Looking really good keep up the good work! Vented wide fenders would be sexy~!

07-15-2009, 01:19 PM	#123 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 17	Just wanted to let everybody know the car was picked up saturday with no parts. Our suppliers sent us bad resin so we had to trash those parts we made (not the molds, the carbon fiber parts only) and we had to get new resin. We just got a few samples of resin last week to try and see what would work best for us and so far it looks like we have exactly what we need. We are working on his parts and with in the next week (give or take a few days) we will be sending him parts starting with the CF roof, b pillars, front bumper overlay, and rear valence overlay. Just an FYI because I dont want anybody getting the wrong ideas. Once he gets all the parts he will post pictures when he has a chance. We how ever will post pictures of the parts here at our shop but we cant control when he takes pictures. Bullitt wanted to get a good amount of parts on before he took pictures from what I was told. Stay tuned!

07-16-2009, 09:27 AM	#129 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 17	Sure can!

07-18-2009, 09:13 PM	#131 (permalink)
hellogoodbye Base Member Join Date: Jun 2009 Location: San marcos tx Posts: 41 Drives: 370z Rep Power: 16	nice job :P i might be getting those parts lol

07-18-2009, 10:01 PM	#132 (permalink)
shadspimp Base Member Join Date: Apr 2009 Location: Massachusetts Posts: 63 Drives: 370Z Rep Power: 16	John anything else close to finished, or in the works right now that we'll see in the next couple days?

07-19-2009, 02:43 PM	#133 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 17	This new week Ill be sending b pillars, front bumper license overlay, and a rear valence to bullitt. Then after we finish these 3 we will be making the roof. We have to finish the vented hood then show you guys, create the mold and then out of that mold make bullittes hood. And we are still looking for a local person to come down so we can create a mold of the reverse side of the hatch. We didnt have time to make both sides of the hatch mold ... We are also finishing the spoiler prototype.

07-19-2009, 04:57 PM	#134 (permalink)
Endgame A True Z Fanatic Join Date: Nov 2008 Location: Phoenix Posts: 1,613 Drives: Nothing Now! Rep Power: 224	cool

07-24-2009, 02:21 PM	#135 (permalink)
Scribe Base Member Join Date: Jan 2009 Location: Houston, TX. Posts: 182 Drives: Touring-Sport-Manual Rep Power: 220	Any updates on this?