Smart Stop Break Lights?

joshs09slvrZ · 08-26-2012, 11:07 AM

Very nice man!

So how did you wire this up? Does the fog only come on when you hit the brakes?

Stealth36 · 08-26-2012, 12:35 PM

Yes, it only comes on when you hit the brake. I can probably do a diy since I took some pictures along the way. Its actually pretty simple as long as you're comfortable sodering.

joshs09slvrZ · 08-26-2012, 03:05 PM

Quote:

Originally Posted by Stealth36

Yes, it only comes on when you hit the brake. I can probably do a diy since I took some pictures along the way. Its actually pretty simple as long as you're comfortable sodering.

That would be awesome! Can you include your parts list as well?

Stealth36 · 08-26-2012, 05:44 PM

Quote:

Originally Posted by joshs09slvrZ

That would be awesome! Can you include your parts list as well?

Blinking Kahtec Fog Light Install

Jack370Z · 03-19-2013, 08:03 PM

Installed my Kahtec module last week. Took less that an hour. Wired to my 3rd brake lite in the wing. Simple install...just be careful removing the interior panel on the hatch, the plastic things aren't fragile but will break . I did not use the included blue connectors...I used in-line splices to take up less room in the wire bundle. I bought the flash then steady module. It flashes about six times then goes steady. You have to take your foot off the brake for 8 seconds for the flashing to reset. Works great.

08-26-2012, 11:07 AM	#1 (permalink)
joshs09slvrZ Track Member Join Date: May 2010 Location: Spring Hill, FL Posts: 547 Drives: 09 7AT 370Z Rep Power: 17	Very nice man! So how did you wire this up? Does the fog only come on when you hit the brakes? __________________ Stillen Gen3 CAI\|Berk HFC and CBE\|UpRev\|15mm H&R front spacers\|20mm Ichiba rear spacers\|Stillen front and rear sway bars\|Yokohama S. Drives\|Swift springs\|JDM Blinking Fog\|8000k HIDs\|9% window tinting, 47% on full windshield

08-26-2012, 12:35 PM	#2 (permalink)
Stealth36 Base Member Join Date: Mar 2011 Location: West Chester, PA Posts: 41 Drives: 09 370Z M6 Rep Power: 15	Yes, it only comes on when you hit the brake. I can probably do a diy since I took some pictures along the way. Its actually pretty simple as long as you're comfortable sodering. __________________ 09 370Z Touring/Sport MT6 - Show: GTR Push Start, Evo-R Fog Light w/ Kahtec, Nismo Shift Knob, Paint matched engine cover - Performance: Fast Intentions CBE 18" resonators

03-19-2013, 08:03 PM	#5 (permalink)
Jack370Z Base Member Join Date: Oct 2009 Location: South Carolina Posts: 128 Drives: 09 370Z Plat SP 6MT Rep Power: 16	Installed my Kahtec module last week. Took less that an hour. Wired to my 3rd brake lite in the wing. Simple install...just be careful removing the interior panel on the hatch, the plastic things aren't fragile but will break . I did not use the included blue connectors...I used in-line splices to take up less room in the wire bundle. I bought the flash then steady module. It flashes about six times then goes steady. You have to take your foot off the brake for 8 seconds for the flashing to reset. Works great. __________________ Jack 09 370Z Last edited by Jack370Z; 03-22-2013 at 10:44 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
smart top	mjaime_007	Nissan 370Z Roadster (Convertible)	49	10-15-2017 09:29 AM
Wire Turn Signal to Break Lights	bdavis89	Exterior & Interior	12	06-08-2012 10:49 PM
HELP!!!!! My dome lights/trunk/window visor lights went out HELP!!!	dbkustomz	Exterior & Interior	8	10-28-2011 07:49 AM
Parking lights, Signal lights, license plate light opinion	wdkwang	Exterior & Interior	0	03-18-2011 11:25 PM
FS: stock rotors, calipers, break pads, break lines and connecting hardware for 370z	tank3487	Parts for sale (Private Classifieds)	3	05-05-2010 01:22 PM