What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

fzgood

I personally hate crap like this.

Paul Walker was a self-made man of means who directed the fruits of his success to charity and betterment of the life of others. He passed in a tragic and dramatic fashion that has been the center of negative media attention for nearly a week.


Nelson Mandela was an admirable political figure who played a central role in the abolition of apartheid in S.A. "Life better for millions" doesn't quite paint the complete picture though. Crime is rampant in South Africa, and much like race continues to be an issue in the United States, it will take decades maybe longer for South Africa to recover from the rift caused by apartheid. In the meantime it continues to be a central focus in dealing with their poverty and social issues. Mandela set a country on a righteous path, but they are by no means out of the woods yet. He passed peacefully from natural causes and old age, surrounded by loved ones.


Armchair activists seem to love ridiculing other people for seemingly nonsensical behavior, but it's only nonsensical if you ignore critically basic details of the situations. Walker's death: untimely, tragic, dramatic. Mandela's death: peaceful, natural, expected. They were both good men. No one should be made to feel any shame for mourning either of them.


Staying on topic: Drove aggressively to get myself some In-n-out burger. Double Double w/ whole grilled. How do you like yours?

Pintsize725

Got her wheels balanced. Will need new rears soon. :/

__________________
Tracie

DatsunFTW

Got these in the mail yesterday from Luciano I put them on the ground to test the looks of them before going off to work . Very busy lately and will be for a couple of weeks so I have no time to put them on yet....
Will be on soon enough and will turn my sexy red Zed into a sexier red Zed


20131207_161417 by datsunpride, on Flickr

20131207_161539 by datsunpride, on Flickr

__________________

Gadgetech

I got everything wired up and installed today! The biggest surprise was after talking to Axxess and them telling me to switch the wires (pins 5,11 on the ASWC harness to pins 6,16 on the car harness as stated in the manual to pins 5,11 to 16,6. We had already tapped the wires from the ASWC to the vehicle harness so we decided to cut both wires from the ASWC to the car harness and butt solder the blue/gray to the red/gray wires and vice versa) I was able to auto program the buttons. They all work and I just used the auto program method! I have a non-Bose Z so maybe that's the diff.

In regards to the e brake bypass, everything I read about that with the Kenwood HU is that you just ground the green wire to the chassis which I did...I'll go for a drive tonight to see if there's any issue and update back here.

Here's a picture of my buddy, we just peeled off wiring insulation on the vehicle's harness to tap the ASWC wires in.

__________________
Upstate Z Club

nmjaxx9

Whos in this biotch, drove the Z to work and detail later. Also ordered another key fob.

Waiz

Bought this last night and just used it on my Z and my Fit

12 Volt, 100 PSI High Volume Air Compressor

Rears were at 30 on the Z and took it up to 35 in little over a minute, gas station air pump be damned!

Xavier6401

Put on my new badge, new license plate frame and installed the GTR start button!

SPOHN

Sent manifold off to Z1 to be ported.

__________________

osirus

Christmas time came a ill early. Drove out and secured new apartment Yay! And then got these on Xmas deal. #Focalftw


Sent from my iPad using Tapatalk

roy'sz

I heard those are pretty stout compressors for their size.

__________________
https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

Fountainhead

Yeah I got a compressor for my garage and I never looked back!
So nice to be able to do air on my terms instead of waiting in line or driving up and the thing is broken.....AND took my money!

roy'sz

2 Horsepower, 29 gal., 125 Cast Iron Vertical Air Compressor

I use this being that I have air tools and what not. I can fill a flat in 20 seconds lol.

On topic did some hotrodding on my way to work.

__________________
https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

Riptide67

Made a short little clip of how my Z sounds

http://youtu.be/HL1A3QI1SA4

http://m.youtube.com/watch?feature=e...m-upload_owner

__________________

2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana
Follow me on Instagam @s3zero_z3four

roy'sz

it looks like you were trying to change maps on your car. you have to hold the cruise deceleration button down and press cancel once, or twice etc to choose your map, that is if you have a tune.

__________________
https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

kenchan

checked psi, turned the wheels/tires 1/3 of a turn by hand. will do this again mid-FEB.