What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

kenchan · 06-20-2013, 11:05 PM

swapped back to weds. this time running 285/35/19 on the rear vs 275/35/19.

chrischhorn · 06-21-2013, 12:14 AM

Quote:

Originally Posted by kenchan

swapped back to weds. this time running 285/35/19 on the rear vs 275/35/19.

Your small picture is small.

kenchan · 06-21-2013, 12:29 AM

here

FairladyZ10PG · 06-21-2013, 12:38 AM

Plastidipped my door handles gunmetal with glossifier. Came out great! However, I messed up while applying glossifier to my rear bumper so I had to remove the whole plastidip which turned out to be harder than advertised

chrischhorn · 06-21-2013, 12:43 AM

Quote:

Originally Posted by kenchan

here

now you're just wasting bandwidth

Sh0velMan · 06-21-2013, 01:01 AM

Hood pins sloppily installed.

At least the sloppy part is inside the engine bay where you can't normally see it. Sigh.

90 ST · 06-21-2013, 03:51 AM

Finally got time to put on my CBE from Magnaflow, as well had the clutch swaped out for a ACT unit, and a flywheel from Stillen. Tomorrow, the new stereo install starts.

w0rM · 06-21-2013, 07:28 AM

Quote:

Originally Posted by kenchan

here

I see your smaller thumbnail and raise you a micro thumbnail...

onzedge · 06-21-2013, 07:50 AM

Quote:

Originally Posted by w0rM

I see your smaller thumbnail and raise you a micro thumbnail...

kenchan · 06-21-2013, 08:14 AM

Quote:

Originally Posted by w0rM

I see your smaller thumbnail and raise you a micro thumbnail...

Ok you win.

TheGreatOne · 06-21-2013, 10:32 AM

Late for work today because after dropping off my kid in the Forester, decided to go back home and switch to the Z since its so nice out!

Definitely worth it

Ordering the hood props today from Z1, looking to do some smaller "fine touch" mods. I got Nismo oil cap and radiator cap, red dress up bolts...not sure what else I could do...

JARblue · 06-21-2013, 10:45 AM

Quote:

Originally Posted by TheGreatOne

not sure what else I could do...

You could replace hoses if you haven't already. Also, if painting the strut tower brace is too much for you, you might consider something small like a Z logo or anything else that fits your taste.

TheGreatOne · 06-21-2013, 11:49 AM

Quote:

Originally Posted by JARblue

You could replace hoses if you haven't already. Also, if painting the strut tower brace is too much for you, you might consider something small like a Z logo or anything else that fits your taste.

Well my strut bar says "40th anniversary" So I'll leave that but good idea on the hoses

I know the rad ones and the smaller ones near the engine cover are pretty easy, I hear the rest are a pita to get to

JARblue · 06-21-2013, 12:03 PM

Quote:

Originally Posted by TheGreatOne

Well my strut bar says "40th anniversary" So I'll leave that but good idea on the hoses

I know the rad ones and the smaller ones near the engine cover are pretty easy, I hear the rest are a pita to get to

There's also the Engine Bay Wire Tuck DIY to clean things up a bit

DIY: Engine Bay Wire Tuck

carvalho360 · 06-21-2013, 12:05 PM

Changing my oil hopefully Thanks to AKs diy. Headed to autozone. Unfortunately im driving unbadged since it took longer than i thought to get the old adhesive off. Looks like crap in the back without the burger

06-20-2013, 11:05 PM	#4921 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	swapped back to weds. this time running 285/35/19 on the rear vs 275/35/19. onzedge likes this.

06-21-2013, 12:29 AM	#4923 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	here FairladyZ10PG and Shadezz like this.

06-21-2013, 12:38 AM	#4924 (permalink)
FairladyZ10PG A True Z Fanatic Join Date: Aug 2010 Location: SoCal-IE Posts: 1,890 Drives: PGraphite m6 Rep Power: 255	Plastidipped my door handles gunmetal with glossifier. Came out great! However, I messed up while applying glossifier to my rear bumper so I had to remove the whole plastidip which turned out to be harder than advertised __________________ ///MPPSK///M Performance FRONT SPLITTER///M Performance KIDNEY GRILLS///MPerformance CF MIRRORS///MPerformance CF SPOILER///AC SCHNITZER

06-21-2013, 10:32 AM	#4931 (permalink)
TheGreatOne A True Z Fanatic Join Date: Jan 2011 Location: Montreal, Canada Age: 46 Posts: 1,980 Drives: E60 BMW M5 Rep Power: 21	Late for work today because after dropping off my kid in the Forester, decided to go back home and switch to the Z since its so nice out! Definitely worth it Ordering the hood props today from Z1, looking to do some smaller "fine touch" mods. I got Nismo oil cap and radiator cap, red dress up bolts...not sure what else I could do... __________________ 2017 SUBARU STI 2008 E60 M5 - SOLD 2010 40th Anniversary 370Z - SOLD (and missing her)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5D3 Discussion	FrancoPhoto	Photography	6	07-09-2012 01:08 AM
[Off Topic,GTA]Who dares to drive in the snow tonight with their Z?	Da.Menace	Canada	11	02-05-2011 06:43 PM
Double Din Dvd/Nav Feedback Topic	Carbon_z	Audio & Video	7	11-19-2010 12:10 PM
on the topic of oil ??	sonic370	Nissan 370Z General Discussions	5	07-17-2010 10:50 PM
Lounge (Off Topic) Rules	AK370Z	The Lounge (Off Topic)	0	09-23-2008 08:19 PM

06-21-2013, 03:51 AM	#4927 (permalink)
90 ST A True Z Fanatic Join Date: May 2010 Location: Calgary Posts: 1,861 Drives: 90 and 15 GMC Sierra Rep Power: 421	Finally got time to put on my CBE from Magnaflow, as well had the clutch swaped out for a ACT unit, and a flywheel from Stillen. Tomorrow, the new stereo install starts.

06-21-2013, 12:05 PM	#4935 (permalink)
carvalho360 Base Member Join Date: Jul 2010 Location: Philadelphia Posts: 114 Drives: 09 370z black Rep Power: 15	Changing my oil hopefully Thanks to AKs diy. Headed to autozone. Unfortunately im driving unbadged since it took longer than i thought to get the old adhesive off. Looks like crap in the back without the burger