What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

red2010z

Soon as he picks her up next week I will overload this Forum with pics.

__________________
AGENCY K&N SWIFT CSF EVO-R VOSSEN MICHELIN Z1 JVC ZENCLOSURE JLW3 JVC

red2010z

I think the Matte Graphite CV3 matches the Red 370z very well! Alot of these Forum members hate CV3

__________________
AGENCY K&N SWIFT CSF EVO-R VOSSEN MICHELIN Z1 JVC ZENCLOSURE JLW3 JVC

Waiz

Damn I haven't driven my Z since last Friday after getting a daily so I drove her around town to make sure everything was lubed up properly and working well.

Wow you can really appreciate the Z even more when you don't drive it

kenchan

moved my WEDS rears to garage from storage to get new DW's wrapped...hopefully this weekend. going from 275/35/19 to 285/35/19.

my advans on my nismo wheels are almost done...

LunaZ

Played in the rain.
Passed a couple of Mustangs whose drivers were obviously petrified by their RWD monsters.

__________________

2009 370Z Sport/Touring/Navigation | see my journal for mods
facebook: Be my friend... or not.

Waiz

#Firstworldproblems

forza370z

Tried to take the oem shift knob off of the car.

Going to Gym next week and try it again next next week.

chrischhorn

Gym wont help you. A leather strap wrench will!!

__________________

R.I.P. 8/01/13 1SlowZ
One day I'll have another....

red2010z

If you are trying to remove it without damaging it good luck. When I removed mine it came off in multiple pieces.

__________________
AGENCY K&N SWIFT CSF EVO-R VOSSEN MICHELIN Z1 JVC ZENCLOSURE JLW3 JVC

dmhenderson

1) accept that you are going to destroy your shift knob in the process of taking it off the car. I've done it twice - on my current car the knob actually ripped in half all the way through the aluminum threading.

2). Assemble the following: two pipe wrenches, a towel, wire brush, and a friend.

3). Attach wrench #1 to shift knob. Wrap towel around shifter (shaft) and attach wrench #2. Have your friend hold wrench #2 steady so you don't torque the gearbox and go to town on the shift knob. It'll come off. Use wire brush to clean threading on shaft.

Nissan uses a ridiculous amount of loctite on the OEM shift knob for reasons I will never understand - especially considering they sell aftermarket shift knobs.

Hth


Sent from my iPhone using Tapatalk

__________________

Alexwallace23

I guess the Nissan worker that put my shift knob on had a lazy day and didnt put it on the way it was supposed to... My shift knob came off without a struggle and intact.

swoopdeville

I drove my wife's Pontiac G6 to work after driving my Z to work for the past 3 weeks, 150 miles round trip. I used to think the G6 was somewhat sporty, now it feels like I'm driving a school bus compared to the Z. I now know what it feels like to drive a real sports car.

forza370z

Haha true that. But I used a rubber strap wrench and it just kept slipping. Next time I will use a big boy pipe wrench instead.

I agree... At this moment, I'd say I don't care to destroy the oem shift knob or not. I already got a lightly used oem shift knob as a spare.

Thanks for the tips! Yup I will use a pipe wrench instead.

Hmmm, lucky you or maybe your previous owner already did the dirty job for you if yours is a used?

On another note, I got a Nismo chrome shift knob. How's the fitment? Is it hard to align the words towards the rear?

roy'sz

Hey forza they use A LOT of locktite on mine. I used a 6in pipe wrench. Make sure you clean up the threads good before re install. The green locktite is awesome!

__________________
https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

forza370z

Thanks man. I will make sure to clean the threads before put the new one on.