What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

kenchan · 08-01-2013, 06:27 PM

finally got around to take a snap of the interior with my revised dinoc trim.

critical · 08-01-2013, 07:48 PM

nmjaxx9 · 08-01-2013, 07:57 PM

Drove her hard

Fountainhead · 08-01-2013, 08:56 PM

Quote:

Originally Posted by critical

Do you have aftermarket sways or polyurethane bushings?

Here's what is used:

Energy Suspension 9.11104 8 Oz Tub Of Lubricant : Amazon.com : Automotive

Hi critical,

I'm stock, and thanks, I didn't even know such a thing existed. For years I've been using silicone spray! never did much good for very long.
Appreciate the tip!

roy'sz · 08-01-2013, 09:36 PM

got redline mt-85 on order along with the 75w90 for the diff. Currently at 56k and its about that time again. Hopefully it gets here soon!

onzedge · 08-01-2013, 10:09 PM

I am past my break-in period on my 2013, Hooray.

critical · 08-02-2013, 12:04 AM

Quote:

Originally Posted by Fountainhead

Hi critical,

I'm stock, and thanks, I didn't even know such a thing existed. For years I've been using silicone spray! never did much good for very long.
Appreciate the tip!

I don't think the stock sway bar bushings need to be greased. They shouldn't be making noise as far as I know.

Mandingo · 08-02-2013, 12:32 AM

Quote:

Originally Posted by critical

I don't think the stock sway bar bushings need to be greased. They shouldn't be making noise as far as I know.

My stock bushings began to squeak and pop actually. I used plumber's silicone grease and problem solved.

On Topic: I emptied my catch can today at 1,500 miles. I got about a tablespoon of dark amber deliciousness

hide187 · 08-02-2013, 12:43 PM

Fresh 5w30 happily lubricating my delicate moving parts.

onzedge · 08-02-2013, 12:44 PM

Quote:

Originally Posted by hide187

Fresh 5w30 happily lubricating my delicate moving parts.

Me too. I had my first oil change in my 2013 today.

roy'sz · 08-02-2013, 02:48 PM

Quote:

Originally Posted by critical

I don't think the stock sway bar bushings need to be greased. They shouldn't be making noise as far as I know.

I agree.....if its popping that means its time for them to be replaced.

chrischhorn · 08-02-2013, 05:04 PM

Did some body work to my car.......Was cruising up to go do a photoshoot at a very nice scenic shot and the unthinkable happened....Not sure how, but my driver front spindle snapped.....

Front bumper is damaged but I believe the crash bar is intact. Steering wheel air bag did deploy. Luckily it was slow speed (roughly 25mph) and I didn't hit a tree or anything. Just went into tall brush. I'm pretty sure salvageable but he passenger rear quarter panel has me worried. Undercarriage is good.

Waiz · 08-02-2013, 05:14 PM

Quote:

Originally Posted by kenchan

yah, honestly i really shouldve done this much sooner. it wasn't until recently i really noticed the tiny chips on my G which is 9yrs old this year that i regret not clearbra-ing. then some rock did a nasty hit on the hood of my G last week and was like that's it!

didn't want to repeat my mistake so went ahead to salvage the rest of my Z's clean front end.

i have like 3 chips on there already, but oh well. at least i wont have those tiny chips now.

Did you get this done professionally Ken or use that new 3m stuff?

Quote:

Originally Posted by chrischhorn

Did some body work to my car.......Was cruising up to go do a photoshoot at a very nice scenic shot and the unthinkable happened....Not sure how, but my driver front spindle snapped.....

Front bumper is damaged but I believe the crash bar is intact. Steering wheel air bag did deploy. Luckily it was slow speed (roughly 25mph) and I didn't hit a tree or anything. Just went into tall brush. I'm pretty sure salvageable but he passenger rear quarter panel has me worried. Undercarriage is good.

Damn man sorry to see this happen, lucky it wasn't worse than that

GaleForce · 08-02-2013, 06:48 PM

Quote:

Originally Posted by chrischhorn

Did some body work to my car.......Was cruising up to go do a photoshoot at a very nice scenic shot and the unthinkable happened....Not sure how, but my driver front spindle snapped.....

Front bumper is damaged but I believe the crash bar is intact. Steering wheel air bag did deploy. Luckily it was slow speed (roughly 25mph) and I didn't hit a tree or anything. Just went into tall brush. I'm pretty sure salvageable but he passenger rear quarter panel has me worried. Undercarriage is good.

Whoa!

I hope you're ok.

LunaZ · 08-02-2013, 08:22 PM

Quote:

Originally Posted by chrischhorn

Did some body work to my car.......Was cruising up to go do a photoshoot at a very nice scenic shot and the unthinkable happened....Not sure how, but my driver front spindle snapped.....

Front bumper is damaged but I believe the crash bar is intact. Steering wheel air bag did deploy. Luckily it was slow speed (roughly 25mph) and I didn't hit a tree or anything. Just went into tall brush. I'm pretty sure salvageable but he passenger rear quarter panel has me worried. Undercarriage is good.

Holy crap dude!
That actually happened to my '95 Eclipse... sort of. It was actually the lower control arm ball joint that failed, but the results were exactly the same.
Are you under warranty?

08-01-2013, 06:27 PM	#5506 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	finally got around to take a snap of the interior with my revised dinoc trim. critical likes this.

08-01-2013, 07:57 PM	#5508 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 26	Drove her hard GaleForce, roy'sz and Fountainhead like this.

08-01-2013, 09:36 PM	#5510 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	got redline mt-85 on order along with the 75w90 for the diff. Currently at 56k and its about that time again. Hopefully it gets here soon! critical likes this. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

08-01-2013, 10:09 PM	#5511 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 64 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	I am past my break-in period on my 2013, Hooray. pedZ, JARblue and GaleForce like this. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

08-02-2013, 12:43 PM	#5514 (permalink)
hide187 Base Member Join Date: Jul 2009 Location: Florida Posts: 186 Drives: 09 370 MB Sport Rep Power: 47	Fresh 5w30 happily lubricating my delicate moving parts. onzedge likes this.

08-02-2013, 05:04 PM	#5517 (permalink)
chrischhorn A True Z Fanatic Join Date: Jan 2012 Location: Mililani, HI Posts: 1,566 Drives: 2014 Juke Nismo RS Rep Power: 16	Did some body work to my car.......Was cruising up to go do a photoshoot at a very nice scenic shot and the unthinkable happened....Not sure how, but my driver front spindle snapped..... Front bumper is damaged but I believe the crash bar is intact. Steering wheel air bag did deploy. Luckily it was slow speed (roughly 25mph) and I didn't hit a tree or anything. Just went into tall brush. I'm pretty sure salvageable but he passenger rear quarter panel has me worried. Undercarriage is good. __________________ R.I.P. 8/01/13 1SlowZ One day I'll have another....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5D3 Discussion	FrancoPhoto	Photography	6	07-09-2012 01:08 AM
[Off Topic,GTA]Who dares to drive in the snow tonight with their Z?	Da.Menace	Canada	11	02-05-2011 06:43 PM
Double Din Dvd/Nav Feedback Topic	Carbon_z	Audio & Video	7	11-19-2010 12:10 PM
on the topic of oil ??	sonic370	Nissan 370Z General Discussions	5	07-17-2010 10:50 PM
Lounge (Off Topic) Rules	AK370Z	The Lounge (Off Topic)	0	09-23-2008 08:19 PM