after market seats: airbag sensors?

brucelidat · 08-10-2012, 01:44 PM

So I was getting a quote for labor for swapping out my seats and the guy mentioned an airbag bypass resistor being needed or my airbags will not work with the new seats. I was thinking of getting Corbeau LG1 seats. Does anyone know what I would need to do to have the airbags work? Where can I find this airbag bypass resistor? My friend also mentioned that the passeneger seat has a weight sensor module that needs to be swapped over tot he new seat as well...

theDreamer · 08-10-2012, 02:02 PM

Actually you do not need the resistor, your steering wheel & side airbags will still work. The resistor is to trick the system into thinking you still have the seat airbags which you will not anymore. The passenger seat is just a small pad which detects weight. Here is a nice DIY on what you will need for both sides: http://www.the370z.com/diy-section-d...light-fix.html

brucelidat · 08-10-2012, 02:10 PM

thanks for the info and link! So the resistor is just to fix the airbag light? Without it, my airbags will still be functional?

theDreamer · 08-10-2012, 02:11 PM

Quote:

Originally Posted by brucelidat

thanks for the info and link! So the resistor is just to fix the airbag light? Without it, my airbags will still be functional?

Correct.

brucelidat · 08-10-2012, 02:14 PM

This goes for the passenger seat as well or do I actually have to transfer that weight sensor pad over?

brucelidat · 08-10-2012, 02:21 PM

Okay, just read the DYI writeup. Disregard the last question.

martin82 · 08-10-2012, 04:27 PM

I actually didn't know that the steering wheel air bag would still deploy even with error in the system, that's good to know....

kenchan · 08-10-2012, 04:51 PM

SRS rest is kinda tricky on some cars so i suggest you just get the resistor and jam it into the harness and e-tape it. 33ohms or something, right? (check the DIY).

theDreamer · 08-10-2012, 06:46 PM

I would still do the resistor no matter what, want to make sure all systems stay in check.

martin82 · 08-10-2012, 08:11 PM

problem for passenger seat you would still need the sensor pad....... disassemble the whole lower pad............

kenchan · 08-10-2012, 09:28 PM

Quote:

Originally Posted by martin82

problem for passenger seat you would still need the sensor pad....... disassemble the whole lower pad............

mmmmmmm... good point.

NeverBoneStck · 08-10-2012, 09:58 PM

I have corbeau A4 seats and u do have transfer the weight sensor over .. Once u do that and the airbag sensor trick your good to go ..

08-10-2012, 01:44 PM	#1 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	after market seats: airbag sensors? So I was getting a quote for labor for swapping out my seats and the guy mentioned an airbag bypass resistor being needed or my airbags will not work with the new seats. I was thinking of getting Corbeau LG1 seats. Does anyone know what I would need to do to have the airbags work? Where can I find this airbag bypass resistor? My friend also mentioned that the passeneger seat has a weight sensor module that needs to be swapped over tot he new seat as well... __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

08-10-2012, 02:02 PM	#2 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Actually you do not need the resistor, your steering wheel & side airbags will still work. The resistor is to trick the system into thinking you still have the seat airbags which you will not anymore. The passenger seat is just a small pad which detects weight. Here is a nice DIY on what you will need for both sides: http://www.the370z.com/diy-section-d...light-fix.html __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

08-10-2012, 02:10 PM	#3 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	thanks for the info and link! So the resistor is just to fix the airbag light? Without it, my airbags will still be functional? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

08-10-2012, 02:14 PM	#5 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	This goes for the passenger seat as well or do I actually have to transfer that weight sensor pad over? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

08-10-2012, 02:21 PM	#6 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	Okay, just read the DYI writeup. Disregard the last question. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

08-10-2012, 04:27 PM	#7 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	I actually didn't know that the steering wheel air bag would still deploy even with error in the system, that's good to know....

08-10-2012, 04:51 PM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	SRS rest is kinda tricky on some cars so i suggest you just get the resistor and jam it into the harness and e-tape it. 33ohms or something, right? (check the DIY).

08-10-2012, 06:46 PM	#9 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	I would still do the resistor no matter what, want to make sure all systems stay in check. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

08-10-2012, 08:11 PM	#10 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	problem for passenger seat you would still need the sensor pad....... disassemble the whole lower pad............

08-10-2012, 09:58 PM	#12 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	I have corbeau A4 seats and u do have transfer the weight sensor over .. Once u do that and the airbag sensor trick your good to go .. __________________ Juiced! That is all you need to know !!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about Racing Seats & Airbag	sixpax	Exterior & Interior	2	06-06-2012 05:50 PM
New bucket seats but needa get rid of airbag flashing	djsekz	Exterior & Interior	5	02-05-2012 10:42 AM
After market leather seats?	mspeasl	Exterior & Interior	33	09-22-2010 09:20 AM
WTT: Black Leather/Suede Seats and Cash - for - Red 40th Anniversary 370Z Seats	'10Anamoly	Parts for sale (Private Classifieds)	8	08-14-2010 10:42 PM
Can i swap the stock cloth seats for leather seats??	Will3212	Exterior & Interior	14	09-26-2009 12:09 AM