What did you do with your Z today IV

alcheng · 07-09-2012, 08:17 PM

Quote:

Originally Posted by kenchan

after checking several places including my dealer and a few tire shops, all of them mentioned that when factory installed TPMS are removed from factory wheels, they use rubber stems instead of metal ones. one dealer even told me the sport 19's and nismo's both come with rubber stems if you buy the wheels separately and so they use what is specified by nissan.

am i being to anal about valve stems?

Mr.kenchan, you are not being anal, I would love to have metal valve stems too.

Regarding Mr.GaleForce's info about the stems become rusty, depends how long after and what kind of metal does the stems made of...

Quote:

Originally Posted by kenchan

hi mr.alcheng!

yah, ive not bought my prime yet. it turned into a gopro. lol

i shall get one next season.

Whatever works the best for you Mr.kenchan

Quote:

Originally Posted by kenchan

i shall put a 25cent coin insert slot thingie on the toilet. each flush will cost 25 cents.

Well... you gonna need a coin machine in the house and prepare your kids gonna ask you for 25cents or dollar bill.... every 30secs.... LOL

Quote:

Originally Posted by onzedge

My wife spends money on cosmetics -- how much? I have no idea. It is likely less than I spend on lenses and car stuff (maybe).

However, when she is done with her potions, elixirs and voodoo application every morning, she pretty much looks like she did before she started. I commented on this phenomenon and she replied "That's the point".

Mrs.Dr.onzedge pretty much looks like she did before she started?? That is exceptionally good Mr.onzedge.... lots of guys couldn't recognize their wife/gf after the process

!!!!

Quote:

Originally Posted by SPOHN

Installed SPL rear camber and toe arms today after I took my front fascia to the body shop. Also assembled my power steering cooler kit and my AP Racing BBK came in today. Ready to get my car back. This is killing me.

Mr.SPOHN, getting there... getting there...

Quote:

Originally Posted by Alchemy

The car equivalent to gobs of make up is a civic with an obnoxious body kit, stock wheels, an enormus wing and every paste on mesh vent available.

Something like this:

Quote:

Originally Posted by happytheman

All hobbies get expensive:

RC cars/planes
Photography
Automotive (includes Modding)
Traveling
Guns
Digital piano playing
Ex-wives
Current Wife/Wives
Current gf(s)
Hardcore computer gaming
Etc

One more for the list:
Her Plastic Surgery

Done....

Alchemy · 07-09-2012, 09:38 PM

^ lol, alcheng!!! Yeah, thats the equivalent of the gal that has so much makeup on that when she wakes up in your bed the next day she leaves half of her face on your nice white pillows

BTW I have never seen such an offensive trunk before.

happytheman · 07-09-2012, 11:12 PM

30k service and alignment performed today.

Received my Stoner Tarminator today. It's time to tackle that pesky road paint that's splattered in my fender wells.

Pintsize725 · 07-09-2012, 11:14 PM

Aaah the vibration from my FI exhaust never gets old!

ZMan8 · 07-09-2012, 11:15 PM

Washed and detailed the Z

found more rock chips than I previously thought

. Time to order the large Dr. Colorchip

kenchan · 07-09-2012, 11:20 PM

Quote:

Originally Posted by GaleForce

welcome to my world.

hi mr.gale.

hahahaha!

i guess customs sucks both ways...

anyway, the latest is that the knob arrived late pm.

Quote:

Originally Posted by GaleForce

Yes, easy to do.

check my short shifter DIY for an idea of what you're getting into.

thanks, i just need enough lift on the back-end so that i dont mistakenly drill through any harnesses.

Quote:

Originally Posted by GaleForce

Probably. The local tire shop says the metal air valves can corrode and cause air leaks... Your car doesn't see bad weather enough to worry though. Flip a coin, heads = metal, tails = rubber.

ahh, perhaps that's why, thanks for the info. the tire shop was like especially if my car's a hobby car i would absolutely not have issues with either one, but rubber is recommended by most oem's so that's why they use it. they also claim they use the exact same valve stems that the dealers use.

Quote:

Originally Posted by happytheman

My wife's chunk of change mainly goes towards moisturizers.

yah, mr. happy, i dont know what my wife's cosmetics are, but honestly i rather have my wife looking pretty than cut costs and look like a raisin.

Quote:

Originally Posted by alcheng

Mr.kenchan, you are not being anal, I would love to have metal valve stems too.

Regarding Mr.GaleForce's info about the stems become rusty, depends how long after and what kind of metal does the stems made of...

Whatever works the best for you Mr.kenchan

Well... you gonna need a coin machine in the house and prepare your kids gonna ask you for 25cents or dollar bill.... every 30secs.... LOL

Something like this:

Done....

hi mr.alcheng- major LOL

@ civic. hahahaha!!

yah, as for the valve stems the tire shop said they replace each time new tires are mounted so for me that would be about once every 8-10k miles in dry weather only. and my car is garaged most of the time so UV/cracking is not an issue. i suppose it's more cosmetics thing now... i guess i can get some black rays caps and feel better. lol

kenchan · 07-09-2012, 11:23 PM

Quote:

Originally Posted by happytheman

30k service and alignment performed today.

Received my Stoner Tarminator today. It's time to tackle that pesky road paint that's splattered in my fender wells.

Quote:

Originally Posted by Pintsize725

Aaah the vibration from my FI exhaust never gets old!

hahaha, enjoy the Z, pint!

Quote:

Originally Posted by ZMan8

Washed and detailed the Z

found more rock chips than I previously thought

. Time to order the large Dr. Colorchip

nice, mr.zman.

but sorry to hear about the chips.

im sure the dr.c-chip will help significantly.

happytheman · 07-09-2012, 11:27 PM

Quote:

Originally Posted by ZMan8

Washed and detailed the Z

found more rock chips than I previously thought

. Time to order the large Dr. Colorchip

Yup, that's what I ordered! Just waiting for it to get here. Should be any day now!

happytheman · 07-09-2012, 11:27 PM

Quote:

Originally Posted by Pintsize725

Aaah the vibration from my FI exhaust never gets old!

I hear that!

kenchan · 07-09-2012, 11:28 PM

so here is my knob comparison... PWJDM vs TWM biggie Type-R

i have to say, i luv the biggie type-r..

pattern...

driver side...

passenger side...

the weight is impressive. it's shorter than the pwjdm and gates are even crisper.

can't wait to take her out for a spin.

fitment wise the base it just a hair too small in diameter to cover the factory boot holder ring thingie, so i made a little gasket using hard black felt. it's a factory finish.

since i used flash it emphasizes the felt, but in real life you can't see it.

happytheman · 07-09-2012, 11:32 PM

Holy Crap!

Ken, that looks badass! I wantz!

kenchan · 07-09-2012, 11:34 PM

Quote:

Originally Posted by happytheman

Holy Crap!

Ken, that looks badass! I wantz!

yah, i guarantee you will absolutely luv this knob especially if you like the type-r design.

this is considerably bigger than the regular TWM type-r i use in my G. but it's not stupid big. it's prefect.

happytheman · 07-09-2012, 11:34 PM

Just thought I'd mention it here: I had metal valve stems to begin with.

happytheman · 07-09-2012, 11:35 PM

Quote:

Originally Posted by kenchan

yah, i guarantee you will absolutely luv this knob especially if you like the type-r design.

this is considerably bigger than the regular TWM type-r i use in my G. but it's not stupid big. it's prefect.

What's the weight diff between the PWJDM and the Biggie Type-R?

And if you didn't catch it the first time, that looks sweeeeet!

happytheman · 07-09-2012, 11:37 PM

Quote:

Originally Posted by kenchan

yah, mr. happy, i dont know what my wife's cosmetics are, but honestly i rather have my wife looking pretty than cut costs and look like a raisin.

Yup, she even has moisturizer with SPF in it!

07-09-2012, 09:38 PM	#3677 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 45 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	^ lol, alcheng!!! Yeah, thats the equivalent of the gal that has so much makeup on that when she wakes up in your bed the next day she leaves half of her face on your nice white pillows BTW I have never seen such an offensive trunk before. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

07-09-2012, 11:12 PM	#3678 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	30k service and alignment performed today. Received my Stoner Tarminator today. It's time to tackle that pesky road paint that's splattered in my fender wells. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

07-09-2012, 11:14 PM	#3679 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211844	Aaah the vibration from my FI exhaust never gets old! __________________ Tracie

07-09-2012, 11:15 PM	#3680 (permalink)
ZMan8 A True Z Fanatic Join Date: Oct 2011 Location: Chicago, IL Posts: 5,844 Drives: 10 370z 40th M6 Rep Power: 659	Washed and detailed the Z found more rock chips than I previously thought . Time to order the large Dr. Colorchip __________________ 2010 370Z 40 Anniv., 6 MT \| Fast Intentions \| Swift Springs \| SPC \| Z1Motorsports \| JWM \| Redline Oils \| 35% Window Tint 2015 Mazda6 \| 370ZChicago: Chicago Area Cars & Coffee

07-09-2012, 11:32 PM	#3686 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Holy Crap! Ken, that looks badass! I wantz! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

07-09-2012, 11:28 PM	#3685 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	so here is my knob comparison... PWJDM vs TWM biggie Type-R i have to say, i luv the biggie type-r.. pattern... driver side... passenger side... the weight is impressive. it's shorter than the pwjdm and gates are even crisper. can't wait to take her out for a spin. fitment wise the base it just a hair too small in diameter to cover the factory boot holder ring thingie, so i made a little gasket using hard black felt. it's a factory finish. since i used flash it emphasizes the felt, but in real life you can't see it.

07-09-2012, 11:34 PM	#3688 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Just thought I'd mention it here: I had metal valve stems to begin with. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What did you do with your Z today II	Trips	Nissan 370Z General Discussions	7271	04-11-2012 09:28 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
Do you know what today is?	Jeffblue	The Lounge (Off Topic)	145	07-01-2011 10:47 AM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 04:03 PM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 01:30 AM