What did you do with your Z today IV

shadoquad · 07-02-2012, 04:22 PM

Quote:

Originally Posted by JARblue

Well done, Mr. Shado

I agree on the third photo - the pink tones with the dragon winding out in front is a beautiful sight to behold.

Quote:

Originally Posted by m4a1mustang

It's hot out, foo! And since the power is out at the office I got to work from home, which means I haven't seen the sun. It's after 4 PM. If I see it now I'll get all sorts of effed up.

"meemeemmeeememememeemmee"

That's you, that's what you sound like.

ZMan8 · 07-02-2012, 04:22 PM

Quote:

Originally Posted by kenchan

woah, GL with the exam!

Thanks Mr. Kenchan.

kenchan · 07-02-2012, 04:27 PM

Quote:

Originally Posted by JARblue

If you don't think the Big Type-R is too big for the Z interior, then I'm going with the Desert Eagle black pearl with shift pattern etching. Though I'm gonna have trouble convincing the wife to let me spend $200 (with discount) on a new shift knob right now. Maybe in a few months

hahaha, i have the normal TWM typeR in satin in my G right now and it feels great.

the satin finish actually keeps the surface cooler than normal stainless or mirror (hot

finishes).

the big type-r is only considerably bigger, not HUGEGANGOUS looking at the picts, i think.

i got the standard brushed stainless one for my Z.

the PWJDM was fine until i mis-shifted the other week when the rear of my Z spun out about 65degrees requiring a 120 degree counter and i was trying to get into 2nd gear when the knob slipped out of my hand causing me to spill- water-from-the-cup which is a big fail.

it was an abrupt recovery from a drift and i did not enjoy it one bit. i blame it on the knob.

alcheng · 07-02-2012, 04:37 PM

Quote:

Originally Posted by SPOHN

AP BBK on the way

Sounds Good Mr.SPOHN

Quote:

Originally Posted by ZMan8

Mr Alcheng

Test is as 5 PM tonight

Good Luck with the Exam !!!

ZMan8 · 07-02-2012, 04:49 PM

Quote:

Originally Posted by kenchan

hahaha, i have the normal TWM typeR in satin in my G right now and it feels great.

the satin finish actually keeps the surface cooler than normal stainless or mirror (hot

finishes).

the big type-r is only considerably bigger, not HUGEGANGOUS looking at the picts, i think.

i got the standard brushed stainless one for my Z.

the PWJDM was fine until i mis-shifted the other week when the rear of my Z spun out about 65degrees requiring a 120 degree counter and i was trying to get into 2nd gear when the knob slipped out of my hand causing me to spill- water-from-the-cup which is a big fail.

it was an abrupt recovery from a drift and i did not enjoy it one bit. i blame it on the knob.

Oh oh no more pwd jdm products for Mr. Kenchan.

Quote:

Originally Posted by alcheng

Sounds Good Mr.SPOHN

Good Luck with the Exam !!!

Thank you! Well it's time for me to go.

JARblue · 07-02-2012, 05:01 PM

Quote:

Originally Posted by kenchan

hahaha, i have the normal TWM typeR in satin in my G right now and it feels great.

the satin finish actually keeps the surface cooler than normal stainless or mirror (hot

finishes).

the big type-r is only considerably bigger, not HUGEGANGOUS looking at the picts, i think.

i got the standard brushed stainless one for my Z.

the PWJDM was fine until i mis-shifted the other week when the rear of my Z spun out about 65degrees requiring a 120 degree counter and i was trying to get into 2nd gear when the knob slipped out of my hand causing me to spill- water-from-the-cup which is a big fail.

it was an abrupt recovery from a drift and i did not enjoy it one bit. i blame it on the knob.

HAHA blame the knob!

It certainly will get hot here in TX in the summer, but my hands are pretty heat tolerant from working in a kitchen for many years (I try to keep up that ability by handling hot stuff on a regular basis - like grabbing the exhaust tips with both hands after a spirited drive

). If I really need to, I am considering purchasing some driving gloves to keep in the car since my hands tend to get sweaty when I'm holding onto the steering wheel or shift knob for an extended period of time. Its more when I'm taking a trip out of town than during DD. I haven't decided if it makes me pretentious or just lame, but I figure if its for the purpose of better maintaining the leather surfaces my hands touch, then its perfectly acceptable.

kenchan · 07-02-2012, 05:10 PM

Quote:

Originally Posted by ZMan8

Oh oh no more pwd jdm products for Mr. Kenchan.

Thank you! Well it's time for me to go.

good luck mr. zman!!

hahaha, yah, PWJDM knob will be out of my car soon.

Quote:

Originally Posted by JARblue

HAHA blame the knob!

It certainly will get hot here in TX in the summer, but my hands are pretty heat tolerant from working in a kitchen for many years (I try to keep up that ability by handling hot stuff on a regular basis - like grabbing the exhaust tips with both hands after a spirited drive

). If I really need to, I am considering purchasing some driving gloves to keep in the car since my hands tend to get sweaty when I'm holding onto the steering wheel or shift knob for an extended period of time. Its more when I'm taking a trip out of town than during DD. I haven't decided if it makes me pretentious or just lame, but I figure if its for the purpose of better maintaining the leather surfaces my hands touch, then its perfectly acceptable.

i use tein's mechanic gloves on occasion which are partcially suede and great for driving.

the spin out came quick and i was prepared for it, but wasnt expecting the knob to slip out of my grasp. never once have the TWM knob (or even the stock Z knob) slipped out of my hand. so i blame the knob.

JARblue · 07-02-2012, 05:14 PM

Quote:

Originally Posted by kenchan

i use tein's mechanic gloves on occasion which are partcially suede and great for driving.

the spin out came quick and i was prepared for it, but wasnt expecting the knob to slip out of my grasp. never once have the TWM knob (or even the stock Z knob) slipped out of my hand. so i blame the knob.

I certainly can't imagine the TWM Desert Eagle slipping out of my grasp.

kenchan · 07-02-2012, 05:16 PM

Quote:

Originally Posted by JARblue

I certainly can't imagine the TWM Desert Eagle slipping out of my grasp.

i like the shape of the desert eagle too. it's like my old Greddy knob i had back in my WRX days.

Pintsize725 · 07-02-2012, 05:18 PM

I give up. I keep trying to catch up and then there are more posts to sort through. I'll check back in later. For now, I'm going to go drool over my car.

kenchan · 07-02-2012, 05:19 PM

Quote:

Originally Posted by Pintsize725

I give up. I keep trying to catch up and then there are more posts to sort through. I'll check back in later. For now, I'm going to go drool over my car.

that's plenty valid post, pint!

JARblue · 07-02-2012, 05:22 PM

Quote:

Originally Posted by kenchan

i like the shape of the desert eagle too. it's like my old Greddy knob i had back in my WRX days.

Its ergonomics fit precisely with how I like to hold the shift knob the majority of the time.

JARblue · 07-02-2012, 05:23 PM

Quote:

Originally Posted by Pintsize725

I give up. I keep trying to catch up and then there are more posts to sort through. I'll check back in later. For now, I'm going to go drool over my car.

Drooling is more fun than working anyway

Quote:

Originally Posted by kenchan

that's plenty valid post, pint!

Just do what Mr. Kenchan does and post w/o bothering to go back and read

Pintsize725 · 07-02-2012, 05:24 PM

Quote:

Originally Posted by JARblue

Drooling is more fun than working anyway

Just do what Mr. Kenchan does and post w/o bothering to go back and read

Do you have your new decals ordered for the Z yet?

JARblue · 07-02-2012, 05:31 PM

Quote:

Originally Posted by Pintsize725

Do you have your new decals ordered for the Z yet?

Funny you should ask. I was talking to Melody about this and she said she didn't want me to put any decals on the Z still. But she said I could put them on the Acura

I'm not sure what to do except put them on both cars

07-02-2012, 05:18 PM	#2965 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211845	I give up. I keep trying to catch up and then there are more posts to sort through. I'll check back in later. For now, I'm going to go drool over my car. __________________ Tracie

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What did you do with your Z today II	Trips	Nissan 370Z General Discussions	7271	04-11-2012 09:28 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
Do you know what today is?	Jeffblue	The Lounge (Off Topic)	145	07-01-2011 10:47 AM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 04:03 PM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 01:30 AM