What did you do with your Z today IV

onzedge · 06-29-2012, 04:06 PM

Quote:

Originally Posted by kenchan

wooo~ looks like my gopro quick-release tripod mount came in.

will give it a shot tonight on how it mounts.

GaleForce · 06-29-2012, 04:06 PM

Quote:

Originally Posted by kenchan

wat are we talking bout again? lift?

Yes, the Dannmar Portable Lift. MaxJax Portable Two Post Lift - Dannmar Equipment

kenchan · 06-29-2012, 04:09 PM

Quote:

Originally Posted by GaleForce

Yes, the Dannmar Portable Lift. MaxJax Portable Two Post Lift - Dannmar Equipment

cool! oh ok, i remember seeing this pict yesterday.

GL with the lift.

kenchan · 06-29-2012, 04:10 PM

any know if they sell metal valve stems (non TPMS) for either the sport 19's or nismo 19 wheels?

are the valve stem holes in the wheels a special diameter or anything?

kenchan · 06-29-2012, 04:26 PM

Quote:

Originally Posted by kenchan

any know if they sell metal valve stems (non TPMS) for either the sport 19's or nismo 19 wheels?

are the valve stem holes in the wheels a special diameter or anything?

<= everyone here.

hahaha

this is a fun read...

Valve stem problem
New feet

onzedge · 06-29-2012, 04:31 PM

Quote:

Originally Posted by kenchan

any know if they sell metal valve stems (non TPMS) for either the sport 19's or nismo 19 wheels?

are the valve stem holes in the wheels a special diameter or anything?

Maybe.

kenchan · 06-29-2012, 04:38 PM

Quote:

Originally Posted by onzedge

Maybe.

probably one of these... but not sure which one...

http://www.miltonindustries.com/uploads/Pages_12-16.pdf

GaleForce · 06-29-2012, 04:40 PM

Quote:

Originally Posted by kenchan

wooo~ looks like my gopro quick-release tripod mount came in.

will give it a shot tonight on how it mounts.

Nice! I'm still waiting for my cup holder mount thingy. I did come up with an idea to mount the mic with the GoPro. I just need a thin piece of metal to make an L bracket.

GaleForce · 06-29-2012, 04:43 PM

Quote:

Originally Posted by kenchan

probably one of these... but not sure which one...

http://www.miltonindustries.com/uploads/Pages_12-16.pdf

I think #492 should do the trick and look über Baller!

kenchan · 06-29-2012, 04:48 PM

Quote:

Originally Posted by GaleForce

Nice! I'm still waiting for my cup holder mount thingy. I did come up with an idea to mount the mic with the GoPro. I just need a thin piece of metal to make an L bracket.

sounds good!

where are you planning to mount the gopro?

Quote:

Originally Posted by GaleForce

I think #492 should do the trick and look über Baller!

hahahaha!!!

looking at the prius wheel in the guys' blog, i think factory wheels use this one.. 409 or the S409. it comes with 2 grommets and is a reverse mount type like the TPMS valves (nut on the outside of wheel...dangling and such).

GaleForce · 06-29-2012, 04:57 PM

Quote:

Originally Posted by kenchan

sounds good!

where are you planning to mount the gopro?

hahahaha!!!

looking at the prius wheel in the guys' blog, i think factory wheels use this one.. 409 or the S409. it comes with 2 grommets and is a reverse mount type like the TPMS valves (nut on the outside of wheel...dangling and such).

Today I mounted on the rear hatch glass. I'll check the video later to see how it looks. I didn't care for the distraction it caused while looking in the rear view mirror.

The 409/409s look close. Are you not going to run TPMS on the new wheels?

JARblue · 06-29-2012, 05:03 PM

Man I'm behind for being gone a couple of hours. Went to Trudy's with the wife to celebrate last day on the job. Apparently we might be celebrating even more - we're at the Acura dealership letting them appraise the Honda after test driving an ILX. A 2.0L 150hp car is not quite what I was expecting but it's really a decent little car. The wife is quite pleased with it, so I am as well.

PS Gale, I asked the wife about Grandma Stranger - definitely hesitant at first but I think I could get an ok after a night out on the town if I feed her the proper beverages

kenchan · 06-29-2012, 05:03 PM

Quote:

Originally Posted by GaleForce

Today I mounted on the rear hatch glass. I'll check the video later to see how it looks. I didn't care for the distraction it caused while looking in the rear view mirror.

The 409/409s look close. Are you not going to run TPMS on the new wheels?

ahh! looking forward to your vid. did you try using your zoom as a mic/preamp?

considering the rattles i get in the audio from the headrest bars, i think that's a good location if you can get enough front view. since my audio input is from the tascam in the cupholder mount, there's no rattles in my audio, but when i plug the real sony mic with a L-adapter i hear rattles. it's not too bad but just annoying.

yah, i think the 409 should work. i dont like running TPMS and i currently dont run them in my WEDS. so yah, i dont plan on running in the new set.

JARblue · 06-29-2012, 05:04 PM

Lol @ rep-love fest!!

kenchan · 06-29-2012, 05:04 PM

Quote:

Originally Posted by JARblue

Man I'm behind for being gone s couple of hours. Went to Trudy's with the wife to celebrate last day on the job. Apparently we might be celebrating even more - we're at the Acura dealership letting them appraise the Honda after test driving an ILX. A 2.0L 150hp car is not quite what I was expecting but it's really a decent little car. The wife is quite pleased with it, so I am as well.

PS Gale, I asked the wife about Grandma Stranger - definitely hesitant at first but I think I could get an ok after a night out on the town if I feed her the proper beverages

sounds good, and GL with the apprasial and ILX if your wife decides. it's a nice car for sure.

06-29-2012, 05:03 PM	#2667 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Man I'm behind for being gone a couple of hours. Went to Trudy's with the wife to celebrate last day on the job. Apparently we might be celebrating even more - we're at the Acura dealership letting them appraise the Honda after test driving an ILX. A 2.0L 150hp car is not quite what I was expecting but it's really a decent little car. The wife is quite pleased with it, so I am as well. PS Gale, I asked the wife about Grandma Stranger - definitely hesitant at first but I think I could get an ok after a night out on the town if I feed her the proper beverages __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \| Last edited by JARblue; 06-29-2012 at 07:15 PM. Reason: correcting typo because the iphone is too effing stupid to figure out that I mean to type "a" when I type space "s" space...

06-29-2012, 05:04 PM	#2669 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Lol @ rep-love fest!! __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What did you do with your Z today II	Trips	Nissan 370Z General Discussions	7271	04-11-2012 09:28 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
Do you know what today is?	Jeffblue	The Lounge (Off Topic)	145	07-01-2011 10:47 AM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 04:03 PM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 01:30 AM

06-29-2012, 04:10 PM	#2659 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	any know if they sell metal valve stems (non TPMS) for either the sport 19's or nismo 19 wheels? are the valve stem holes in the wheels a special diameter or anything?