What did you do with your Z today IV

ZMan8 · 06-12-2012, 01:32 AM

Quote:

Originally Posted by Pintsize725

Good night boys!

good night ma'am

bbigby64 · 06-12-2012, 07:17 AM

Quote:

Originally Posted by happytheman

Hey all! First time logging in today. I got pulled over for doing 37 in a 30 this am on the way to work.

Teh pole-leese man state that he had pulled over four of us that work at the hospital this morning alone.....and that we (the employees) were "just going WILD"!! Ummm, I didn't know that 37mph was "going wild". Be advised guys...don't do 37 in a 30....you just might get cuffed, yer ride impounded and thrown in jail.

Called Stillen this morning and was somewhat dismayed to learn that H&R does not sell individual studs for their spacers... If you are in need of purchasing studs...you're going to have to purchase the whole kit.

I know that I'm way late on this; I'm trying to catch up on all of these threads, but rule of thumb:

1. Speed limit 25 or less, go 5 mph under. These are usually residential rodes with kids.
2. Speed limit 30, go no more than 5 miles over.
3. Speed limit 40 or 50, go no more than 10 mph over.
4. Speed limit 55, go no more than 13 over.
5. Speed limit 65, skies the limit!

shadoquad · 06-12-2012, 07:49 AM

Quote:

Originally Posted by bbigby64

I know that I'm way late on this; I'm trying to catch up on all of these threads, but rule of thumb:

1. Speed limit 25 or less, go 5 mph under. These are usually residential rodes with kids.
2. Speed limit 30, go no more than 5 miles over.
3. Speed limit 40 or 50, go no more than 10 mph over.
4. Speed limit 55, go no more than 13 over.
5. Speed limit 65, skies the limit!

Mostly agree with this, except for point 5. It varies, but it's never a good idea, really, to go more than 10 over the limit. I wouldn't stomp the pedal just because 65 is the limit. Heck, there are 70mph limits out there. I've seen plenty of people pulled over on those stretches.

And I've been quite a few places where the speed limit is 10 or 15. Much like 25-30, you do not want to exceed this. Usually those limits are at places like airports or schools (with high pedestrian traffic) or publicly accessible military bases. You never want to speed in these situations.

bbigby64 · 06-12-2012, 07:51 AM

Good morning, folks!

Taking the Z in tomorrow for its 15,000 mile checkup. I detailed her yesterday evening to get rid of the grime from the Boston trip. Now, she's looking

. I still have to vacuum the interior, though.

GaleForce · 06-12-2012, 08:56 AM

Quote:

Originally Posted by happytheman

Oh, one thing I didn't mention: He let me go. So, even though Hess was kinda being an *** for pulling me over...he didn't ticket me.

Ordered my 20mm spacers.

Good to know the cop let you go.

Quote:

Originally Posted by kenchan

i would check online which resins are recommended for CF. since it's black cf it shouldn't matter but dont want it to get cloudy or anything.

oh man...

hahahaha!!

mr.happy-

on the 20mm.

Quote:

Originally Posted by Face

From what I understand, epoxy resins are less prone to clouding compared to polyester resins which are used in cheaper applications.

The epoxy resins I've used have held up without a hitch. I bought a few yards of twill weave CF and epoxy resin just to play around with. My first project was a replacement handle for our dryer when the cheap stock handle cracked. A problem I found was common on this particular Kenmore Elite after a little research. (I also found that most home appliance complaints came from women who repeatedly broke their equipment by forcibly opening the doors once they had locked closed, and then subsequently called for class-action lawsuits against the manufacturer.)

Clothes dry 20% faster now.

I'll have to see if my carbon fiber supplier is still open. I haven't fabricated anything with carbon fiber/Kevlar for ~10 years. Sounds like the same stuff is used. Thanks guys

GaleForce · 06-12-2012, 09:00 AM

Quote:

Originally Posted by bbigby64

Good morning, folks!

Taking the Z in tomorrow for its 15,000 mile checkup. I detailed her yesterday evening to get rid of the grime from the Boston trip. Now, she's looking

. I still have to vacuum the interior, though.

Good morning sir

A clean Z =

Fire · 06-12-2012, 09:29 AM

Hi guys. Wet Tues. Supposed to be nice tomorrow and Thurs. Wed. morning is time to get the ZL1. I'm going to get pics of both cars together. Just checking in guys. Have to get some sleep today cause I'm going to be up for a while getting the car. Keep safe guys.

Pintsize725 · 06-12-2012, 10:24 AM

Good morning guys.

kenchan · 06-12-2012, 10:31 AM

Quote:

Originally Posted by Face

From what I understand, epoxy resins are less prone to clouding compared to polyester resins which are used in cheaper applications.

Clothes dry 20% faster now.

lol! that's funny yah, definitely use epoxy but not sure if there are differences between them.

Quote:

Originally Posted by alcheng

Hello guys and gals!!!

Finally have time to check-in.

Going to the airport at 7:45am so I have about 6 hours of sleep,

Been to a supplier's HQ today in here, Jacksonville, a very very modern and grand facility they have. Hope it could be a longer trip... but the good is I am going back tomorrow and I can Z again....

Mr.kenchan I'll go for the 50mm f/1.8 or f/1.4 Click Here

hey mr.alcheng!

hope your trip back is (was) smooth!

thanks on the lens input.

folks have told me 35mm would be better than 50mm for car since i can take shots without backing up via sneaker zoom. i can also get the slight distortion i like to emphasize roundness on some shots, and use for scenic shots as well. not sure.. i will need to think this over more.

Quote:

Originally Posted by bbigby64

I know that I'm way late on this; I'm trying to catch up on all of these threads, but rule of thumb:

1. Speed limit 25 or less, go 5 mph under. These are usually residential rodes with kids.
2. Speed limit 30, go no more than 5 miles over.
3. Speed limit 40 or 50, go no more than 10 mph over.
4. Speed limit 55, go no more than 13 over.
5. Speed limit 65, skies the limit!

you do realize the other speeds also includes kids in the car...

Quote:

Originally Posted by GaleForce

I'll have to see if my carbon fiber supplier is still open. I haven't fabricated anything with carbon fiber/Kevlar for ~10 years. Sounds like the same stuff is used. Thanks guys

sounds great. GL with your project, mr.gale!

good morning everyone!

LunaZ · 06-12-2012, 10:34 AM

Quote:

Originally Posted by bbigby64

I know that I'm way late on this; I'm trying to catch up on all of these threads, but rule of thumb:

1. Speed limit 25 or less, go 5 mph under. These are usually residential rodes with kids.
2. Speed limit 30, go no more than 5 miles over.
3. Speed limit 40 or 50, go no more than 10 mph over.
4. Speed limit 55, go no more than 13 over.
5. Speed limit 65, skies the limit!

Quote:

Originally Posted by shadoquad

Mostly agree with this, except for point 5. It varies, but it's never a good idea, really, to go more than 10 over the limit. I wouldn't stomp the pedal just because 65 is the limit. Heck, there are 70mph limits out there. I've seen plenty of people pulled over on those stretches.

And I've been quite a few places where the speed limit is 10 or 15. Much like 25-30, you do not want to exceed this. Usually those limits are at places like airports or schools (with high pedestrian traffic) or publicly accessible military bases. You never want to speed in these situations.

Speed limits and how they are assigned to various roads mystify me sometimes.
A verrry wide (could be a four lane road) street that is smooth and has great visibility is posted at 25mph. The next street over which is narrow, bumpy AND runs alongside the middle school, is posted at 35mph.
My neighbourhood, which is residential with lots of children present, has narrow streets that are barely two cars wide and necks down to the width of one car when people park in front of their houses, is posted at 25mph. I'd like to see it reduced to 15 or even 10mph.

I think some of the 65mph zones in PA carry a double fine and double points for speeding. I think NJ has the same.
I did a fair bit of driving in Ohio yesterday. I was going 10 over in the 70mph zones and was passing people like they were standing still. I have a feeling they are pretty strict there, too, now that I think about it.

Drove home from Pittsburgh this morning. Three and a half hours in a torrential downpour on the PA Turnpike. The RE-11's did great, but it's easy to see that the roadway wasn't designed to drain the amount of water that was falling from the sky this morning. I hit quite a few patches that resembled ponds and streams. That got a little dicey!

ZMan8 · 06-12-2012, 10:56 AM

Good morning all.

My 2 cents on speed limit is around here you basically shouldn't go more than 5 MPH over the posted limit on any road except highway. Highway is 10 over Max. 7 over in a 55 MPH non interstate/highway road Can get you a ticket in Illinois....stupid I know.

Sent from my SAMSUNG-SGH-I897 using Tapatalk 2

Alchemy · 06-12-2012, 11:01 AM

Quote:

Originally Posted by Fire

Hi guys. Wet Tues. Supposed to be nice tomorrow and Thurs. Wed. morning is time to get the ZL1. I'm going to get pics of both cars together. Just checking in guys. Have to get some sleep today cause I'm going to be up for a while getting the car. Keep safe guys.

Finally getting it huh Fire!!! Congrats!!!

Hello Z friends

Alchemy · 06-12-2012, 11:12 AM

My take on speed limits is that I make up my own. I respect residential and school zones but highways or backroads all bets are off. Gimme a ticket, I dont care. I cant drive 55.

bbigby64 · 06-12-2012, 11:36 AM

Quote:

Originally Posted by shadoquad

Mostly agree with this, except for point 5. It varies, but it's never a good idea, really, to go more than 10 over the limit. I wouldn't stomp the pedal just because 65 is the limit. Heck, there are 70mph limits out there. I've seen plenty of people pulled over on those stretches.

And I've been quite a few places where the speed limit is 10 or 15. Much like 25-30, you do not want to exceed this. Usually those limits are at places like airports or schools (with high pedestrian traffic) or publicly accessible military bases. You never want to speed in these situations.

I'm just kidding about point 5.

In NY, it's common for folks to cruise at 80 on most interstate roads like I90. 75 mph is a minimum in the left lane.

Some go higher for short stretches, but that's risky. 78 is usually safe. I've blown by troopers doing 82, and they didn't budge.

bbigby64 · 06-12-2012, 11:45 AM

Quote:

Originally Posted by kenchan

lol! that's funny yah, definitely use epoxy but not sure if there are differences between them.

hey mr.alcheng!

hope your trip back is (was) smooth!

thanks on the lens input.

folks have told me 35mm would be better than 50mm for car since i can take shots without backing up via sneaker zoom. i can also get the slight distortion i like to emphasize roundness on some shots, and use for scenic shots as well. not sure.. i will need to think this over more.

you do realize the other speeds also includes kids in the car...

sounds great. GL with your project, mr.gale!

good morning everyone!

What I meant about kids is that there are kids running around and playing. I've personally seen 2 people get hit by cars in my life time on the block where I grew up. One was a 7 year old girl that I had warned several time that day to stay out of the street. I think that I was about 12 at the time. The other was a 16 year old teenager. Her brother was chasing her in the street and on the sidewalk, and then she darted back out into the street and collided with an oncoming car. She flew through the air like a baton. The car wasn't actually speeding. It's just that a car with its mass exerts a lot of energy (E = 1/2 mv2). She survived it and is okay today, but what an ordeal that was for her and her family. Therefore, on residential roads, I always creep, often less than the speed limit, especially when parked cars block my view.

06-12-2012, 07:51 AM	#424 (permalink)
bbigby64 Enthusiast Member Join Date: Jan 2012 Location: Fairport, NY Posts: 389 Drives: 10 370Z 7AT Sport Rep Power: 14	Good morning, folks! Taking the Z in tomorrow for its 15,000 mile checkup. I detailed her yesterday evening to get rid of the grime from the Boston trip. Now, she's looking . I still have to vacuum the interior, though. __________________ -Bruce

06-12-2012, 09:29 AM	#427 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	Hi guys. Wet Tues. Supposed to be nice tomorrow and Thurs. Wed. morning is time to get the ZL1. I'm going to get pics of both cars together. Just checking in guys. Have to get some sleep today cause I'm going to be up for a while getting the car. Keep safe guys. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

06-12-2012, 10:24 AM	#428 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211844	Good morning guys. __________________ Tracie

06-12-2012, 10:56 AM	#431 (permalink)
ZMan8 A True Z Fanatic Join Date: Oct 2011 Location: Chicago, IL Posts: 5,844 Drives: 10 370z 40th M6 Rep Power: 659	Good morning all. My 2 cents on speed limit is around here you basically shouldn't go more than 5 MPH over the posted limit on any road except highway. Highway is 10 over Max. 7 over in a 55 MPH non interstate/highway road Can get you a ticket in Illinois....stupid I know. Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 __________________ 2010 370Z 40 Anniv., 6 MT \| Fast Intentions \| Swift Springs \| SPC \| Z1Motorsports \| JWM \| Redline Oils \| 35% Window Tint 2015 Mazda6 \| 370ZChicago: Chicago Area Cars & Coffee

06-12-2012, 11:12 AM	#433 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	My take on speed limits is that I make up my own. I respect residential and school zones but highways or backroads all bets are off. Gimme a ticket, I dont care. I cant drive 55. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What did you do with your Z today II	Trips	Nissan 370Z General Discussions	7271	04-11-2012 09:28 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
Do you know what today is?	Jeffblue	The Lounge (Off Topic)	145	07-01-2011 10:47 AM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 04:03 PM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 01:30 AM