What did you do with your Z today IV

kenchan · 07-21-2012, 07:54 AM

Had to wrap up early yesterday as I was attending to the plumber.
Mr.gale- good to hear you are keeping buzy. Don't work too hard!

Pulling out my Z in 15.

LunaZ · 07-21-2012, 08:15 AM

Quote:

Originally Posted by EazyD

Got a special delivery today....

Tire pron

Sent from my iPhone using Tapatalk

Are those an R compound tyre?

onzedge · 07-21-2012, 09:34 AM

Quote:

Originally Posted by JARblue

morning all

IBEE

Sorry to see shado is leaving

I will miss his posts and brutal honesty

On a Z related note, I do plan to wash it today.

Where is Mr. Shado going? I hope it is not prison or deportation.

SailFree · 07-21-2012, 09:58 AM

Not many Zs but other variety of Porsches and a Ferrari, Lotus, etc. Coffee good. Blueberry scone for breakfast. Got to hobnob with the elite--parked next to a 40th Anniversary. Some folks wandering around, asking questions, especially concerning the 7AT and paddle shifters. My comment was that it was rather easy and sporty to drive because the transmission, in manual mode, downshifted rather aggressively on its own during braking. Easy enough to drop one more gear if needed or simply to begin shifting back up through the gears.

Nissan 370Z Forum

Nissan 370Z Forum

Nissan 370Z Forum

http://www.the370z.com/attachment.ph...1&d=1342886344

http://www.the370z.com/attachment.ph...1&d=1342886344

http://www.the370z.com/attachment.ph...1&d=1342887114

http://www.the370z.com/attachment.ph...1&d=1342887114

Davey · 07-21-2012, 10:01 AM

Quote:

Originally Posted by shadoquad

Folks,

I'm leaving the forum. It was a true pleasure to get to know you.

Take care, and drive it like you stole it, only responsibly

Hope you change your mind in about a day.

kenchan · 07-21-2012, 10:52 AM

Motored my Z and QD'd afterwards. Was a great drive.

will check out later how the Olympus mic did.

Davey · 07-21-2012, 10:55 AM

I put about 150 miles on mine, still 1000 to go for break-in, but I know what to expect so it's not quite like waiting for Christmas morning or anything.

Alchemy · 07-21-2012, 11:10 AM

Im about to go outside and replace my blown gasket, again. We will see if this one lasts longer than 2 months.

Al, dont tell me your panties are in a bunch from the little tiff you got into w G2Z in the 5.0 thread

ZMan8 · 07-21-2012, 11:28 AM

Morning all, I will be driving the Z in a few hours.

onzedge · 07-21-2012, 11:30 AM

Quote:

Originally Posted by Alchemy

Im about to go outside and replace my blown gasket, again. We will see if this one lasts longer than 2 months.

Al, dont tell me your panties are in a bunch from the little tiff you got into w G2Z in the 5.0 thread

Good luck, What a pain in the azz that is.

kenchan · 07-21-2012, 12:10 PM

Quote:

Originally Posted by Alchemy

Im about to go outside and replace my blown gasket, again. We will see if this one lasts longer than 2 months.

Al, dont tell me your panties are in a bunch from the little tiff you got into w G2Z in the 5.0 thread

G2Z is still here? tell him "bye!"

Alchemy · 07-21-2012, 12:23 PM

Quote:

Originally Posted by onzedge

Good luck, What a pain in the azz that is.

Thanks. Any idea of the torque specs on those bolts??

Quote:

Originally Posted by kenchan

G2Z is still here? tell him "bye!"

He stops by the mustang thread occasionally.....

onzedge · 07-21-2012, 12:28 PM

Quote:

Originally Posted by Alchemy

Thanks. Any idea of the torque specs on those bolts??

He stops by the mustang thread occasionally.....

The cat to Y-pipe nuts are 39 ft-lbs -- according to the manual.

onzedge · 07-21-2012, 12:29 PM

Quote:

Originally Posted by Alchemy

Thanks. Any idea of the torque specs on those bolts??

He stops by the mustang thread occasionally.....

Here is the section:

Davey · 07-21-2012, 12:38 PM

Quote:

Originally Posted by kenchan

G2Z is still here? tell him "bye!"

07-21-2012, 11:10 AM	#4688 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 45 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Im about to go outside and replace my blown gasket, again. We will see if this one lasts longer than 2 months. Al, dont tell me your panties are in a bunch from the little tiff you got into w G2Z in the 5.0 thread __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

07-21-2012, 11:28 AM	#4689 (permalink)
ZMan8 A True Z Fanatic Join Date: Oct 2011 Location: Chicago, IL Posts: 5,844 Drives: 10 370z 40th M6 Rep Power: 659	Morning all, I will be driving the Z in a few hours. __________________ 2010 370Z 40 Anniv., 6 MT \| Fast Intentions \| Swift Springs \| SPC \| Z1Motorsports \| JWM \| Redline Oils \| 35% Window Tint 2015 Mazda6 \| 370ZChicago: Chicago Area Cars & Coffee

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What did you do with your Z today II	Trips	Nissan 370Z General Discussions	7271	04-11-2012 09:28 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
Do you know what today is?	Jeffblue	The Lounge (Off Topic)	145	07-01-2011 10:47 AM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 04:03 PM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 01:30 AM

07-21-2012, 07:54 AM	#4681 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Had to wrap up early yesterday as I was attending to the plumber. Mr.gale- good to hear you are keeping buzy. Don't work too hard! Pulling out my Z in 15.

07-21-2012, 10:52 AM	#4686 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Motored my Z and QD'd afterwards. Was a great drive. will check out later how the Olympus mic did.

07-21-2012, 10:55 AM	#4687 (permalink)
Davey A True Z Fanatic Join Date: Apr 2011 Location: Indiana Posts: 3,766 Drives: '15 NISMO 6MT Rep Power: 117171	I put about 150 miles on mine, still 1000 to go for break-in, but I know what to expect so it's not quite like waiting for Christmas morning or anything.