Nismo with a GT wing?

scruffydog

I wonder if anyone here has 370z Nismo (or a full OEM Nismo body kit) and installed a GT spoiler for track instead of the Nismo Spoiler. I wonder how the car looks like...

I tried it on Forza 4 but it doesn't look good (possibly because it sat more further up front in the flat spot of the trunk).....

scruffydog

I found the thread Japanese GT Cars....

This is what I am talking about...

TypeOne

That is a Sunline Racing rear wing...

http://www.sunlineracingusa.com/370Z/370Z-aero.html

It's only like $2100.

scruffydog

Really? I searched the sunline racing website, and I think the mount for the "370z 3D GT Wing type ZC" is different in that picture.





I like how the ones in the Japanese GT picture sits a lot higher and has holes between the mount like the "3D GT Wing type Z for Nissan 370Z"

But this one's bottom bracket which sits on the trunk doesn't mount on the edge.

It looks so much better when it sits on the edge and angles back like this one.

Roadster4Us

The one with the angled bracket looks like the INGS.

*EXCLUSIVE* INGS Front Lips | Z-Power Wing

__________________
Greg


2013 Camaro ZL1

Sibze

Poor eagle is going to get its wings clipped

scruffydog

Yea, I like the Bigger Bracket with holes on the Japanese GT Car more. It's more aggressive.

Funny thing I was having the same conversation with buddy about how there's so many haters out there would totally snap it in half. But if anyone were to spend $2000+ for the OEM Nismo wing and performs less, this would totally be a better buy for function and looks.

Sibze

If you do it, some people will hate it. If you like it. Jump on it that what matters. Worst case, you could always take the wing off and beat them with it....

TypeOne

The ones in the picture are the Sun Line wings, the picture you posted is the wing for the 350Z.

*Taken from their site*


● Our 3D (3 dimensions) design generates significant down force without increasing much aerodynamic drag
● Three widths are offered ; 1,400mm, 1,500mm, or 1,600mm. The pictures are taken with the 1,600mm wing.
● Several height choices are offered from 195mm to 275mm. (195mm, 225mm, 245mm, and 275mm). The picture is taken with the 245mm height bracket on 350Z.
● Available in wet carbon or dry carbon

scruffydog

It's weird, if you look at the title it states for 370Z but the picture is a 350z.

And similarly, the following states it's for the 350Z but it shows a 370z.


This is what I'm looking for but I wasn't able to find this under the Sun Line Website:

PapoZalsa

Here we go again with the non functional Park Bench wing unless you track your car.

Cost $2 to $3K...

__________________
2009 370Z MB Base w/Sport Package 6MT
Modshack's Custom Air Intakes /3M Clear Bra/ Illuminated Kick Plates / F. I CBE w/12" resonators / EVO-R Front Lip / Rear Hatch Wing / Tein S-Tech Springs /Ilegal Tint in the Rep. of VA/4x20mm Z1 Spacers/ Vinyl Roof/Liquid Carbon Designs

brucelidat

I agree, unless you are a serious tracker, do not do the wing. Unless you actually make use of it's intended function, it's super rice to me. Anyhow, that's just my opinion on it.

__________________
Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

bigsix

That looks sweet. To use it for enhanced performance, you gotta drive really hard & fast.

scruffydog

I track my car so the wing will be functional to me.

OMGWTFBBQ

Not quite a Nismo, but here's a picture anyways.



More pictures:

Ricky Kwan's second 370Z build

If anything, you could get the INGS+1 wing and just have custom wing stands made for it to suit your desired angle and height.