20mm spacers + eibach springs won't rub right?

UNKNOWN_370 · 05-16-2012, 04:00 PM

Quote:

Originally Posted by leeyeegue

I'm running swifts and 25mm all around, no issues at all.

with swifts and no camber kit. I'm at 1.7 front and 2.2 rear.

btw H&R spacers are the best, unbeatable

What would be the difference if I bought H&R spacers vs. Z1 spacers???

speedfreek · 05-16-2012, 04:18 PM

Quote:

Originally Posted by UNKNOWN_370

What would be the difference if I bought H&R spacers vs. Z1 spacers???

I was asking myself that same question....and or Ichiba for that matter. I am looking at getting the H&R DRM or Ichiba Version II 20mm all around (direct bolt on). From what it looks like is that the Z1 spacers are not type 2 or direct bolt on. Instead they are the stud replacement style. I am guessing it is preference on which style you want.

But I am also curious about the difference between H&R vs Z1....as well as direct bolt on or stud replacement style (pros/cons).

370zDR · 05-16-2012, 04:24 PM

Quote:

Originally Posted by speedfreek

I was asking myself that same question....and or Ichiba for that matter. I am looking at getting the H&R DRM or Ichiba Version II 20mm all around (direct bolt on). From what it looks like is that the Z1 spacers are not type 2 or direct bolt on. Instead they are the stud replacement style. I am guessing it is preference on which style you want.

But I am also curious about the difference between H&R vs Z1....as well as direct bolt on or stud replacement style.

Direct bolt on 20mm wont work on the front, need to use stud replacement if you want to do 20mm or higher, 15mm bolt on's do just fine. There's no problem for the rears, can go either stud replacement or bolt on's.

No real difference between brands you mentioned, they are all top quality, at the end You are paying for brand name. I'm running 20mm Ichibas all around and parts finish and fit was perfect, no vibrations.

leeyeegue · 05-16-2012, 04:25 PM

HR is so much better made IMO. Like I could tell the difference immediately. Also I ready a lot of bad reviews about ichiba like how they broke etc.

Bolt on spacers need to be super well made too. If they break.....

brucelidat · 05-16-2012, 04:28 PM

I have the z1s 20mm all around. i haven't had nay problems with them yet and hopefully never will.

leeyeegue · 05-16-2012, 04:33 PM

Daily driving I doubt it matters... I autox sometimes so I didn't wanna take any chances lol

speedfreek · 05-16-2012, 04:41 PM

Quote:

Originally Posted by 370zDR

Direct bolt on 20mm wont work on the front, need to use stud replacement if you want to do 20mm or higher, 15mm bolt on's do just fine. There's no problem for the rears, can go either stud replacement or bolt on's.

No real difference between brands you mentioned, they are all top quality, at the end You are paying for brand name. I'm running 20mm Ichibas all around and parts finish and fit was perfect, no vibrations.

Thanks for the info about the 20mm direct bolt on wont work on the front. Now I see why some are going 15mm on front to stick with bolt ons.

I hear you on paying for brand name.

UNKNOWN_370 · 05-16-2012, 04:42 PM

Quote:

Originally Posted by speedfreek

I was asking myself that same question....and or Ichiba for that matter. I am looking at getting the H&R DRM or Ichiba Version II 20mm all around (direct bolt on). From what it looks like is that the Z1 spacers are not type 2 or direct bolt on. Instead they are the stud replacement style. I am guessing it is preference on which style you want.

But I am also curious about the difference between H&R vs Z1....as well as direct bolt on or stud replacement style (pros/cons).

They offer both styles @ Z1. And like he said. The bolt ons won't work in the front.

UNKNOWN_370 · 05-16-2012, 04:46 PM

Quote:

Originally Posted by speedfreek

Thanks for the info about the 20mm direct bolt on wont work on the front. Now I see why some are going 15mm on front to stick with bolt ons.

I hear you on paying for brand name. So unless you want direct bolt ons in the rear then Z1 has a good price on spacers. Then if you are wanting to go higher than 20mm you will have to go with the other brands. As Z1 only goes up to 20mm.

you really need to research this stuff better bruh...25mm bolt on Z1

CNC Aluminum Bolt-On Wheel Spacers (25mm)

You can do 20mm hubcentric in the front. 25mm bolt on in the back with Z1

brucelidat · 05-16-2012, 04:50 PM

I had to replace with longer studs for mine (z1)

speedfreek · 05-16-2012, 04:57 PM

Quote:

Originally Posted by UNKNOWN_370

you really need to research this stuff better bruh...25mm bolt on Z1

CNC Aluminum Bolt-On Wheel Spacers (25mm)

You can do 20mm hubcentric in the front. 25mm bolt on in the back with Z1

I do research bruh. I just missed it I see them now at the top of the page. I must of overlooked them as I am looking at going 20mm all around. Apologies to anyone looking for Z1 in 25mm.

Wheels

leeyeegue · 05-16-2012, 05:10 PM

20mm or above bolt ons work. I think 20mm won't have enough clearance for the studs so the studs won't let the rims fit. 25mm are ok bolt on.

Sent from my SAMSUNG-SGH-I717

05-16-2012, 04:28 PM	#20 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	I have the z1s 20mm all around. i haven't had nay problems with them yet and hopefully never will. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

05-16-2012, 04:50 PM	#25 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	I had to replace with longer studs for mine (z1) __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eibach Wheel Spacers \| 5-20mm \| In Stock \| FREE S&H	AJ@ECSMotorsports	Tires/Wheels	25	03-10-2014 12:37 PM
Eibach Springs & Spacers - Review+Pics	Minicobra1	Brakes & Suspension	128	09-26-2011 01:12 AM
Swift springs 15/20mm spacers rubbing	JGreenwood07	Brakes & Suspension	28	03-31-2011 01:36 AM
Is it okay to put 20mm f&r spacers with H&R springs?	IS2000	Wheels & Tires	1	01-18-2011 03:52 PM
Freshly installed - H&R Springs + 25mm/20mm Ichiba spacers.	atx370z	Brakes & Suspension	23	08-21-2010 08:33 PM

05-16-2012, 04:25 PM	#19 (permalink)
leeyeegue Base Member Join Date: May 2011 Location: Indiana Posts: 230 Drives: 370Z Rep Power: 14	HR is so much better made IMO. Like I could tell the difference immediately. Also I ready a lot of bad reviews about ichiba like how they broke etc. Bolt on spacers need to be super well made too. If they break.....

05-16-2012, 04:33 PM	#21 (permalink)
leeyeegue Base Member Join Date: May 2011 Location: Indiana Posts: 230 Drives: 370Z Rep Power: 14	Daily driving I doubt it matters... I autox sometimes so I didn't wanna take any chances lol

05-16-2012, 05:10 PM	#27 (permalink)
leeyeegue Base Member Join Date: May 2011 Location: Indiana Posts: 230 Drives: 370Z Rep Power: 14	20mm or above bolt ons work. I think 20mm won't have enough clearance for the studs so the studs won't let the rims fit. 25mm are ok bolt on. Sent from my SAMSUNG-SGH-I717