Does oil temp affacts to performance?

leepeen · 06-11-2009, 07:02 PM

My temp gauge usually hits 250F while i'm pusing my Z to limit, and i think the Horse power is decreasing as oil temp is gets hotter and hotter.

Do you guys feel as what i feel? Did anyone noticed it before? I really think i need to find a Z tuner for oil cooler...
i couldn't find any experienced Z tuner so far.... got some cash tho....

CBRich · 06-11-2009, 07:38 PM

Unless you hit limp mode you shouldn't be feeling any performance loss.

wstar · 06-11-2009, 08:00 PM

Higher oil temps = more heat soaking all the metal in the engine/bay = higher IATs = thinner intake air = less HP.

Also at some point (I don't know when it would begin, possibly beyond the limp mode threshold anyways), high oil temps would also make detonation easier, which might cause a timing retard as well.

ChrisSlicks · 06-11-2009, 08:59 PM

I definitely feel a drop in power as the temps come up, whether it is just the heat soak affecting the intake temperatures or there are other factors I'm not sure.

RCZ · 06-11-2009, 09:05 PM

me too, there's a drop in power when it gets hot. I think its a combination of heatsoak and engine management trying to keep temps safe by retarding timing. The more likely culprit is just heatsoak though...kills my car here in FL.

Modshack · 06-11-2009, 09:14 PM

Heat definitly affects timing and consequently, Performance. Most modern ECU's take their cue from the IAT's and retard timing as those temps rise as a protective measure against detonation. They sample water temps to, but they stay pretty well regulated in general. My old Corvette would start to pull Timing at 86 degrees which shows you how low the performance hit starts.. On my turbo'd Audi TT I installed an intake manifold insulator (1/4" Phenolic spacer) which ultimately dropped the IATs 20%, You can see the graphic timing changes in this before/after plot..

Here's an example of an '08 Corvette Timing Map showing the retard as IAT's rise..

leepeen · 06-12-2009, 12:12 AM

THX for brief explanation and valuable information.
i might be sound little bit selfish but, i'm so glad that
i'm not the only one who experiencing HP loss...

So, the bigger intake can suck thicker air = prevents HP loss problem?
According to "Modshacks", i think aftermarket mods are "must" to 370z...

I think "Stock" 370z is fail...

AK370Z · 06-12-2009, 12:25 AM

Leepeen, before jumping into the whole aftermarket mod game, get some good synthetic oil in your Z. With stock oil I used to hit 240s easily. With high quality synthetics like Redline (which I have) or Motul, you'll get better engine protection. I can now only hit 220s (where I used to hit 240s easily with regular oil) with my current oil. If it still doesn't help, oil cooler is your only friend!

P.S. You must wait 3000 miles before switching to synthetic.

leepeen · 06-12-2009, 12:52 AM

Quote:

Originally Posted by AK370Z

Leepeen, before jumping into the whole aftermarket mod game, get some good synthetic oil in your Z. With stock oil I used to hit 240s easily. With high quality synthetics like Redline (which I have) or Motul, you'll get better engine protection. I can now only hit 220s (where I used to hit 240s easily with regular oil) with my current oil. If it still doesn't help, oil cooler is your only friend!

P.S. You must wait 3000 miles before switching to synthetic.

I already put pennzoil platinum full synthetic oil at approxi 600 miles...
With stock oil, i used to hit 240F even if i drove like a grandma...
Now, i only hit above 250F when i rev until 7000~7500rpm for sport driving.

Therefore,

Anyway, i got few questions....

1. Why should i wait until i hit 3000 miles for synthetic?

2. Why people recommend redline synthetic oil for 370Z?

Thx for reply...

ChrisSlicks · 06-12-2009, 08:36 AM

Quote:

Originally Posted by AK370Z

Leepeen, before jumping into the whole aftermarket mod game, get some good synthetic oil in your Z. With stock oil I used to hit 240s easily. With high quality synthetics like Redline (which I have) or Motul, you'll get better engine protection. I can now only hit 220s (where I used to hit 240s easily with regular oil) with my current oil. If it still doesn't help, oil cooler is your only friend!

I think a lot of people saw their oil temperatures drop after a couple of thousand miles. I think this is an indicative indicator that the break-in is complete and that the tight parts (rings etc) are no longer generating as much friction and subsequently, heat. Redline is a good oil no doubt, just saying it may not be the sole reason you saw a temperature drop. My temperatures have dropped and I'm on my second batch of Nissan Ester.

NIZMOZ · 06-12-2009, 02:35 PM

Motul is not that good in the VQ.

Motul is bad oil for the VQ. This was from my350z.

Many other results like this I found on the VQ. They say stay away from it. This was 300v and the other 8100 didn't do any better.

Good Oils: Amsoil, Redline, Penzoil Plat, Castrol Edge.

Castrol edge virgin results from lab..

--------------------------------------------------------------------------------

A guy on another forum got some results back from a virgin sample of castrol edge sent to blackstone...he compares it to amsoil to show the results. Just thought i'd share for those that are curious..

"OK so for $8 bucks a quart let's see what we are getting here......I'll compare it to a $8 Amsoil (retail no PC discount)....

Castrol Edge..............Amsoil.....What it is used for
Silicon 3.1.................2.3.........anti foaming agent
Potassium 0...............0............background residual
Boron 66...................19..detergents, dispersant, extreme pressure add
Barium 0...................0.3..........same as above
Magnesium 12...........12............same as above
Moly 129..................220..........friction modifier
Calcium 3509.............3468..detergents, dispersant, extreme pressure add
Phosphorus 823.........810..detergents, dispersant, extreme pressure add
Zinc 941..................848...detergents, dispersant, extreme pressure add
Vis@40C 61.8...........62.0
Vis@100C 10.4.........10.7

This is one stout add pack and has the Lubrizol signature all over it. Looks like a GRPIII for sure...far better numbers than Mobil1 for sure...so bottom line is this is one serious oil guys.......now of course we have to see it perform.....UOA's forthcoming......by the way this is the Edge 10-30 that was run through the lab....." From Sarge

WShade · 06-12-2009, 07:37 PM

Quote:

Originally Posted by NIZMOZ

Good Oils: Amsoil, Redline, Penzoil Plat, Castrol Edge.

Very good results with Redline in my previously modded cars.

06-11-2009, 07:02 PM	#1 (permalink)
leepeen Base Member Join Date: May 2009 Location: Vancouver Posts: 110 Drives: PW 370z Touring A7 Rep Power: 16	Does oil temp affacts to performance? My temp gauge usually hits 250F while i'm pusing my Z to limit, and i think the Horse power is decreasing as oil temp is gets hotter and hotter. Do you guys feel as what i feel? Did anyone noticed it before? I really think i need to find a Z tuner for oil cooler... i couldn't find any experienced Z tuner so far.... got some cash tho.... Last edited by leepeen; 06-12-2009 at 01:05 AM.

06-11-2009, 08:00 PM	#3 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	Higher oil temps = more heat soaking all the metal in the engine/bay = higher IATs = thinner intake air = less HP. Also at some point (I don't know when it would begin, possibly beyond the limp mode threshold anyways), high oil temps would also make detonation easier, which might cause a timing retard as well. __________________ 7AT Track Car! Journal thread / Car setup details

06-11-2009, 09:14 PM	#6 (permalink)
Modshack A True Z Fanatic Join Date: Mar 2009 Location: Greenville NC Posts: 2,883 Drives: 370Z Sport Rep Power: 977	Heat definitly affects timing and consequently, Performance. Most modern ECU's take their cue from the IAT's and retard timing as those temps rise as a protective measure against detonation. They sample water temps to, but they stay pretty well regulated in general. My old Corvette would start to pull Timing at 86 degrees which shows you how low the performance hit starts.. On my turbo'd Audi TT I installed an intake manifold insulator (1/4" Phenolic spacer) which ultimately dropped the IATs 20%, You can see the graphic timing changes in this before/after plot.. Here's an example of an '08 Corvette Timing Map showing the retard as IAT's rise.. __________________ Steal my car! (SOLD)...Now Porsche Cayman S Oil Cooler DIY: Here! Last edited by Modshack; 06-11-2009 at 09:40 PM.

06-12-2009, 12:12 AM	#7 (permalink)
leepeen Base Member Join Date: May 2009 Location: Vancouver Posts: 110 Drives: PW 370z Touring A7 Rep Power: 16	wow... THX for brief explanation and valuable information. i might be sound little bit selfish but, i'm so glad that i'm not the only one who experiencing HP loss... So, the bigger intake can suck thicker air = prevents HP loss problem? According to "Modshacks", i think aftermarket mods are "must" to 370z... I think "Stock" 370z is fail... Last edited by leepeen; 06-12-2009 at 12:22 AM.

06-12-2009, 12:25 AM	#8 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	Leepeen, before jumping into the whole aftermarket mod game, get some good synthetic oil in your Z. With stock oil I used to hit 240s easily. With high quality synthetics like Redline (which I have) or Motul, you'll get better engine protection. I can now only hit 220s (where I used to hit 240s easily with regular oil) with my current oil. If it still doesn't help, oil cooler is your only friend! P.S. You must wait 3000 miles before switching to synthetic. __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

06-11-2009, 07:38 PM	#2 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 545	Unless you hit limp mode you shouldn't be feeling any performance loss.

06-11-2009, 08:59 PM	#4 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 654	I definitely feel a drop in power as the temps come up, whether it is just the heat soak affecting the intake temperatures or there are other factors I'm not sure.

06-11-2009, 09:05 PM	#5 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	me too, there's a drop in power when it gets hot. I think its a combination of heatsoak and engine management trying to keep temps safe by retarding timing. The more likely culprit is just heatsoak though...kills my car here in FL.

06-12-2009, 02:35 PM	#11 (permalink)
NIZMOZ Track Member Join Date: Nov 2008 Location: San Antonio, TX Posts: 634 Drives: 07 NISMO 350Z SA M6 Rep Power: 491	Motul is not that good in the VQ. Motul is bad oil for the VQ. This was from my350z. Many other results like this I found on the VQ. They say stay away from it. This was 300v and the other 8100 didn't do any better. Good Oils: Amsoil, Redline, Penzoil Plat, Castrol Edge. Castrol edge virgin results from lab.. -------------------------------------------------------------------------------- A guy on another forum got some results back from a virgin sample of castrol edge sent to blackstone...he compares it to amsoil to show the results. Just thought i'd share for those that are curious.. "OK so for $8 bucks a quart let's see what we are getting here......I'll compare it to a $8 Amsoil (retail no PC discount).... Castrol Edge..............Amsoil.....What it is used for Silicon 3.1.................2.3.........anti foaming agent Potassium 0...............0............background residual Boron 66...................19..detergents, dispersant, extreme pressure add Barium 0...................0.3..........same as above Magnesium 12...........12............same as above Moly 129..................220..........friction modifier Calcium 3509.............3468..detergents, dispersant, extreme pressure add Phosphorus 823.........810..detergents, dispersant, extreme pressure add Zinc 941..................848...detergents, dispersant, extreme pressure add Vis@40C 61.8...........62.0 Vis@100C 10.4.........10.7 This is one stout add pack and has the Lubrizol signature all over it. Looks like a GRPIII for sure...far better numbers than Mobil1 for sure...so bottom line is this is one serious oil guys.......now of course we have to see it perform.....UOA's forthcoming......by the way this is the Edge 10-30 that was run through the lab....." From Sarge __________________ SOLD: 2007 NISMO 350Z #0044 Silver Alloy New DD: 2010 Titan Pro4X CC

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What engine temp are you normally around?	RCZ	Engine & Drivetrain	92	06-25-2016 02:58 PM
Oil Temp Survey	travisjb	Nissan 370Z General Discussions	160	11-11-2010 08:49 AM
Everyone with oil temp issues	Musashi	Engine & Drivetrain	1184	12-03-2009 09:47 PM
High oil temp fix for Nismo 370Z	FairmanZ	Nissan 370Z General Discussions	6	07-16-2009 08:33 PM
Warm Up / Oil Temp Gauge	TacoZ	Nissan 370Z General Discussions	8	12-18-2008 02:33 PM