What did you do with your Z today III

happytheman · 05-31-2012, 01:06 PM

Quote:

Originally Posted by Pintsize725

I give up already. Thanks!

You're giving up already? Really? I think perhaps if you have someone there, but you do the work you will feel more confident. I know you've got a lot of mechanically inclined fambly members...perhaps they can supervise over a case of beer or something.

Pintsize725 · 05-31-2012, 01:11 PM

Quote:

Originally Posted by happytheman

You're giving up already? Really? I think perhaps if you have someone there, but you do the work you will feel more confident. I know you've got a lot of mechanically inclined fambly members...perhaps they can supervise over a case of beer or something.

That's actually what I'm hoping for. In negotiations with my uncle to help me.

kenchan · 05-31-2012, 01:44 PM

so after editing on imovie i realized how easy it is to import audio into the video. i also played with several mics to see how well i can 'improve' the sound over the built-in mic of the gopro.

the mic input regardless of which mic you use (internal or external) on the Hero2 sucks. it has a bad ringing high-pitched noise floor that apparently gopro does not know how to get rid of. for external mic, input level is too low, SNR is crap unless i increase gain using pre-amp or place mic next to something super loud like a muffler.

so, im going to begin using my portable tascam digital recorder and sync it on imovie for short clips.

GaleForce · 05-31-2012, 01:46 PM

Quote:

Originally Posted by m4a1mustang

Good morning guys. Kind of tired. I left at 9pm last night and went straight to bed. Got up at 4:30 again for the gym. Can't wait 'til the weekend when I can sleep in some.

I need a nap after reading that.

Quote:

Originally Posted by Fire

Hi Guys

Hope everybody is having a good day.

Mornings Fire

Any word on the ZL1 yet?

Quote:

Originally Posted by happytheman

Morning all!

Work is once more getting in the way of more important things, like trolling this thread and posting.

Scheduling spacer installs with my tech, and hopefully getting to the bottom of the popping noises being emitted on shutdown and sometimes at idle.

Got coffee?

Good morning Brantly

I'm just getting to my coffee now. Earlier than yesterday, but later than I like.

Quote:

Originally Posted by kenchan

gmorning everyone!

no, i have not been keeping up... lol. will need to go back about 20pages.

Geez, keep up would ya.

Have a great day Mr.kenchan

GaleForce · 05-31-2012, 01:48 PM

Quote:

Originally Posted by onzedge

Hmm...

I am soooo doing that! Awesome!

I'll rep you once my 24 hour ban is over.

GaleForce · 05-31-2012, 01:50 PM

Quote:

Originally Posted by kenchan

so after editing on imovie i realized how easy it is to import audio into the video. i also played with several mics to see how well i can 'improve' the sound over the built-in mic of the gopro.

the mic input regardless of which mic you use (internal or external) on the Hero2 sucks. it has a bad ringing high-pitched noise floor that apparently gopro does not know how to get rid of. for external mic, input level is too low, SNR is crap unless i increase gain using pre-amp or place mic next to something super loud like a muffler.

so, im going to begin using my portable tascam digital recorder and sync it on imovie for short clips.

That's also recommended when using your HD DSLR camera for video. GJ

GaleForce · 05-31-2012, 01:59 PM

So, I went to the big city to self clear my body kit at customs. Then I delivered the proper paper work back to the shipping company. I could have picked up the parts then and there but thout it would be better for them to deliver them for me. The parts should be in my garage by noon tomorrow.

While I was in the big city I went to my chiropractor. He was able to squeeze me in and have a look at my back. Apparently two of my ribs had popped out. I'm all fixed up now. A little sore, but doing better.

I might start removing body panels tonight after Mini GaleForce goes to sleep. We'll see.

LunaZ · 05-31-2012, 02:15 PM

Washed it and put it away for the weekend.
Next stop, Orlando. The road crew is already there building our stage:

Pintsize725 · 05-31-2012, 02:19 PM

Quote:

Originally Posted by GaleForce

So, I went to the big city to self clear my body kit at customs. Then I delivered the proper paper work back to the shipping company. I could have picked up the parts then and there but thout it would be better for them to deliver them for me. The parts should be in my garage by noon tomorrow.

While I was in the big city I went to my chiropractor. He was able to squeeze me in and have a look at my back. Apparently two of my ribs had popped out. I'm all fixed up now. A little sore, but doing better.

I might start removing body panels tonight after Mini GaleForce goes to sleep. We'll see.

Pics please sir! And holy crap man, how do your ribs pop out?!

onzedge · 05-31-2012, 02:21 PM

Quote:

Originally Posted by GaleForce

So, I went to the big city to self clear my body kit at customs. Then I delivered the proper paper work back to the shipping company. I could have picked up the parts then and there but thout it would be better for them to deliver them for me. The parts should be in my garage by noon tomorrow.

While I was in the big city I went to my chiropractor. He was able to squeeze me in and have a look at my back. Apparently two of my ribs had popped out. I'm all fixed up now. A little sore, but doing better.

I might start removing body panels tonight after Mini GaleForce goes to sleep. We'll see.

Geesh -- popped ribs?!?!?!?!?

onzedge · 05-31-2012, 02:30 PM

Quote:

Originally Posted by LunaZ

Washed it and put it away for the weekend.
Next stop, Orlando. The road crew is already there building our stage:

Mr. LunaZ -- Trade showa are great fun. Good luck.

LunaZ · 05-31-2012, 02:49 PM

Quote:

Originally Posted by onzedge

Mr. LunaZ -- Trade showa are great fun. Good luck.

Thanks, Mr. onzedge!
I'm really pumped for this show. In addition to the multiple stages we're presenting/demoing on, I got a standing O from VP's during our MC training test, so I am ready to rock the mic this weekend!

onzedge · 05-31-2012, 02:52 PM

Quote:

Originally Posted by LunaZ

Thanks, Mr. onzedge!
I'm really pumped for this show. In addition to the multiple stages we're presenting/demoing on, I got a standing O from VP's during our MC training test, so I am ready to rock the mic this weekend!

Knock 'em dead, man.

m4a1mustang · 05-31-2012, 02:57 PM

So tired. I'm about to go to my salon to get my hurr did. Then I am gonna swing by the salad bar at the grocery store nearby and come back to work until 9ish.

shadoquad · 05-31-2012, 02:58 PM

Quote:

Originally Posted by m4a1mustang

So tired. I'm about to go get my hair cut. Then I am gonna swing by the bar nearby and come back to work until 9ish.

Edited with extra machismo.

05-31-2012, 01:59 PM	#7807 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	So, I went to the big city to self clear my body kit at customs. Then I delivered the proper paper work back to the shipping company. I could have picked up the parts then and there but thout it would be better for them to deliver them for me. The parts should be in my garage by noon tomorrow. While I was in the big city I went to my chiropractor. He was able to squeeze me in and have a look at my back. Apparently two of my ribs had popped out. I'm all fixed up now. A little sore, but doing better. I might start removing body panels tonight after Mini GaleForce goes to sleep. We'll see. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

05-31-2012, 02:15 PM	#7808 (permalink)
LunaZ A True Z Fanatic Join Date: Mar 2010 Location: Vagabond Posts: 6,704 Drives: Project: a white one Rep Power: 512	Washed it and put it away for the weekend. Next stop, Orlando. The road crew is already there building our stage: __________________ 2009 370Z Sport/Touring/Navigation \| see my journal for mods facebook: Be my friend... or not.

05-31-2012, 02:57 PM	#7814 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	So tired. I'm about to go to my salon to get my hurr did. Then I am gonna swing by the salad bar at the grocery store nearby and come back to work until 9ish. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Today was the day.....	Investr	Introduction	7	01-21-2012 07:56 PM
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 12:30 AM

05-31-2012, 01:44 PM	#7803 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	so after editing on imovie i realized how easy it is to import audio into the video. i also played with several mics to see how well i can 'improve' the sound over the built-in mic of the gopro. the mic input regardless of which mic you use (internal or external) on the Hero2 sucks. it has a bad ringing high-pitched noise floor that apparently gopro does not know how to get rid of. for external mic, input level is too low, SNR is crap unless i increase gain using pre-amp or place mic next to something super loud like a muffler. so, im going to begin using my portable tascam digital recorder and sync it on imovie for short clips.