What did you do with your Z today III

alcheng · 05-19-2012, 08:00 PM

Quote:

Originally Posted by happytheman

Nope, you're not the only one...but nobody else is posting.

Keeps things interesting!

I am eating… and watching… lol

Pintsize725 · 05-19-2012, 08:18 PM

I've got some questions for you guys.

Can you Koni without Swifting? Would there be any benefit?

What mods make the Z need a tune?

GaleForce · 05-19-2012, 09:25 PM

Back in the house for the night. I still have 80% of the car to correct.

Today I was trying out my new Griots machine and new Meguires Micro Fiber cutting pad and D300. The Griots machine is

. Anyone want a practically new PCXP? Anyhow, I really liked the results I was getting until I had a failure...

Hmm, this looks normal,

Hey! Wait a minute!

Something isn't right,

Apparently it's common for these to fail, so I was kind of expecting it, just not so soon. I only used this pad for the hood and roof.

Boo! Good thing they come in packs of two.

Here's a teaser, getting work done...

GaleForce · 05-19-2012, 09:28 PM

Quote:

Originally Posted by Pintsize725

I've got some questions for you guys.

Can you Koni without Swifting? Would there be any benefit?

What mods make the Z need a tune?

1. Yes you can. The Koni's would probably feel more responsive over the stock struts.

2. generally, intake + HFC + CBE = Uprev (tuning)

Pintsize725 · 05-19-2012, 09:51 PM

Quote:

Originally Posted by GaleForce

1. Yes you can. The Koni's would probably feel more responsive over the stock struts.

2. generally, intake + HFC + CBE = Uprev (tuning)

Thank you sir! So if I only run an intake + CBE, I shouldn't need it?

ZMan8 · 05-19-2012, 10:18 PM

so I just returned from a bbq at a friends house and got to drive his s2k. Finally I know 2 things:

1. I fit

2. It really is a fun car especially in high rpm.

GaleForce · 05-19-2012, 10:22 PM

Quote:

Originally Posted by Pintsize725

Thank you sir! So if I only run an intake + CBE, I shouldn't need it?

You should be ok. But you could always put an Uprev on your "I got money burning in my pocket and I need to spend it" list.

brucelidat · 05-19-2012, 10:23 PM

I don't think you'd have problems running the breathing bolt-ons without a tune, you just won't be optimized.

happytheman · 05-19-2012, 10:59 PM

Quote:

Originally Posted by Pintsize725

Thank you sir! So if I only run an intake + CBE, I shouldn't need it?

Nah I wouldn't bother with a tune until you have the full fledge of mods. That's when you will reap the most benefit.

happytheman · 05-19-2012, 11:01 PM

Quote:

Originally Posted by GaleForce

Back in the house for the night. I still have 80% of the car to correct.

Here's a teaser, getting work done...

Phenomenal garage. I'm officially jelly.

Pintsize725 · 05-19-2012, 11:15 PM

Quote:

Originally Posted by happytheman

Nah I wouldn't bother with a tune until you have the full fledge of mods. That's when you will reap the most benefit.

What is the full fledge?

alcheng · 05-19-2012, 11:19 PM

Quote:

Originally Posted by Pintsize725

I've got some questions for you guys.

Can you Koni without Swifting? Would there be any benefit?

What mods make the Z need a tune?

1) You should be fine with the Swifts alone, unless you need aggressive handling and bumpy ride, for DD purpose, the Swifts is just fine....

2) If you only have intake and CBE, you don't really need it, the ECU can make adjustment for the intake.

Quote:

Originally Posted by GaleForce

Back in the house for the night. I still have 80% of the car to correct.

Today I was trying out my new Griots machine and new Meguires Micro Fiber cutting pad and D300. The Griots machine is

. Anyone want a practically new PCXP? Anyhow, I really liked the results I was getting until I had a failure...

Hmm, this looks normal,

Here's a teaser, getting work done...

Mr.GaleForce.....

Quote:

Originally Posted by Pintsize725

Thank you sir! So if I only run an intake + CBE, I shouldn't need it?

You are fine, no worry....

alcheng · 05-19-2012, 11:21 PM

Quote:

Originally Posted by Pintsize725

What is the full fledge?

full development ==> tons of mods

happytheman · 05-19-2012, 11:24 PM

Quote:

Originally Posted by Pintsize725

What is the full fledge?

At least the top three breather mods: intake, HFC and CBE.

Intake can be defined as any modification that "improves" stock. Notice the quotes. I did that because there is little improvement necessary to the stock air box.

happytheman · 05-20-2012, 12:27 AM

Wow! Whole lotta nuthin' going on in here tonight.

05-19-2012, 08:18 PM	#5807 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211844	I've got some questions for you guys. Can you Koni without Swifting? Would there be any benefit? What mods make the Z need a tune? __________________ Tracie

05-19-2012, 09:25 PM	#5808 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Back in the house for the night. I still have 80% of the car to correct. Today I was trying out my new Griots machine and new Meguires Micro Fiber cutting pad and D300. The Griots machine is . Anyone want a practically new PCXP? Anyhow, I really liked the results I was getting until I had a failure... Hmm, this looks normal, Hey! Wait a minute! Something isn't right, Apparently it's common for these to fail, so I was kind of expecting it, just not so soon. I only used this pad for the hood and roof. Boo! Good thing they come in packs of two. Here's a teaser, getting work done... __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

05-19-2012, 10:18 PM	#5811 (permalink)
ZMan8 A True Z Fanatic Join Date: Oct 2011 Location: Chicago, IL Posts: 5,844 Drives: 10 370z 40th M6 Rep Power: 658	so I just returned from a bbq at a friends house and got to drive his s2k. Finally I know 2 things: 1. I fit 2. It really is a fun car especially in high rpm. __________________ 2010 370Z 40 Anniv., 6 MT \| Fast Intentions \| Swift Springs \| SPC \| Z1Motorsports \| JWM \| Redline Oils \| 35% Window Tint 2015 Mazda6 \| 370ZChicago: Chicago Area Cars & Coffee

05-19-2012, 10:23 PM	#5813 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	I don't think you'd have problems running the breathing bolt-ons without a tune, you just won't be optimized. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

05-20-2012, 12:27 AM	#5820 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Wow! Whole lotta nuthin' going on in here tonight. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Today was the day.....	Investr	Introduction	7	01-21-2012 07:56 PM
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 12:30 AM