What did you do with your Z today III

Alchemy · 05-10-2012, 01:43 PM

Quote:

Originally Posted by LunaZ

Then he's definitely not pushing it hard enough.

kenchan · 05-10-2012, 01:48 PM

Quote:

Originally Posted by Pintsize725

Hmm I'll need more opinions on the suspension mods then.

I have the stuff for the visibility fix in the car. Just haven't felt up to messing with it. Been really tired and lots of headaches lately.

hummm...hope you feel better, pint!

as for suspension mods... if you're happy with how the car drives i would just leave it alone. it's like opening up a can of worms. unless you know how to setup a car and willing to mess with it, 99% of the time people will make their cars handle worse but claim it is better just because it feels stiffer and something changed.

Quote:

Originally Posted by alcheng

That's the first thing I told Ms.Pintsize725 also.

When I lowered the bimmer, all the camber and toe troubles I got afterwards was pain in the neck. And I think the OEM suspension is good enough for DD/street use.

yep. and im a very picky guy too when it comes to cars. somethings are better left alone, unless one is willing to put the effort to make it actually better. i think there is room for improvement on the Z, but it's not worth the sideeffects for me. my next step is to try the PSS and see where it takes me. RE050 was on the choppy side, DW is on the smooth/soft side. im hoping the PSS lands me in the middle.

m4a1mustang · 05-10-2012, 01:52 PM

Ken, PSS are stiff but smooth. Super grippy but quiet. Soft compound but long lasting.

kenchan · 05-10-2012, 01:57 PM

Quote:

Originally Posted by Alchemy

Stock suspension is good dont get me wrong. If you decide to not do springs or dampers I would at least do sways. They will stiffen it up without changing the actual dampening or height properties of the car. Sways are a great bang for buck mod.

that's a good suggestion if you drive in tight corners. for my driving i dont think the car needs sways either.

i always suggest learn the limit of the car where it starts to power drift. i think most people are unsure when the car starts to slide and kick out so they are scared (or nervous) of the sway of the car. they want the obvious YES i am not sliding, YES i am sliding feedback.

one needs to be patient when the car sways and feel the car at its breaking point, imagine the yaw angle in one's head and counter steer a just enough to make the car point in the right direction. once you get the hang of it i dont think the sway will bother you. it does not bother me at all actually.

the reason why i run swaybars on my G is because of the progressive-rate spring prokits. the turn-in response was muffled so wanted the car to turn in the direction i pointed it quicker. with the simultaneous damp adjustment of the d-specs i was able to get a good medium of turn in and bump damping.

with the koni's thats the one thing i dont like. it's rebound control only so you're stuck with the bound they give you. and that is one reason why im not rushing to get them.

kenchan · 05-10-2012, 01:59 PM

Quote:

Originally Posted by m4a1mustang

Ken, PSS are stiff but smooth. Super grippy but quiet. Soft compound but long lasting.

thanks, yah all the reading has been pointing that direction so i am really excited to get them in the future.

m4a1mustang · 05-10-2012, 02:06 PM

Sway bars are very personal. Some like it stiff some like it soft.

onzedge · 05-10-2012, 02:07 PM

Quote:

Originally Posted by m4a1mustang

Sway bars are very personal. Some like it stiff some like it soft.

ummmm.....

bbigby64 · 05-10-2012, 02:08 PM

Quote:

Originally Posted by Pintsize725

Hmm I'll need more opinions on the suspension mods then.

I have the stuff for the visibility fix in the car. Just haven't felt up to messing with it. Been really tired and lots of headaches lately.

Hope that you feel better, Pint. Make sure that you get enough sleep.

kenchan · 05-10-2012, 02:09 PM

humm... maybe cut down on sugar intake?

Pintsize725 · 05-10-2012, 02:14 PM

Quote:

Originally Posted by Alchemy

Stock suspension is good dont get me wrong. If you decide to not do springs or dampers I would at least do sways. They will stiffen it up without changing the actual dampening or height properties of the car. Sways are a great bang for buck mod.

I think I still want to do the full set up. Realistically, how much of a pain is it going to be to maintain though?

Quote:

Originally Posted by bbigby64

Hope that you feel better, Pint. Make sure that you get enough sleep.

I try, having scoliosis doesn't help with sleeping. Might have sleep apnea as well.

m4a1mustang · 05-10-2012, 02:15 PM

Quote:

Originally Posted by onzedge

ummmm.....

onzedge · 05-10-2012, 02:17 PM

Quote:

Originally Posted by Pintsize725

I think I still want to do the full set up. Realistically, how much of a pain is it going to be to maintain though?

I try, having scoliosis doesn't help with sleeping. Might have sleep apnea as well.

It is not a pain at all. If you are thinking Koni/Swift then once you get the Konis adjusted for your driving style, there is no more maintenance than you would have with an OEM setup.

m4a1mustang · 05-10-2012, 02:18 PM

Swifts + Konis + Sways would be easy to maintain. The only thing I can think of is periodically checking to make sure the sway bar bushings are properly greased.

On the 5.0 I am running a watts link which uses spherical rod-ends. I have to grease them every 2-4 weeks or so otherwise they squeak. Same with my lower control arms. Oh well... labor of love.

Also, happy to announce I am ahead of schedule with this crap at work. I should have everything done by tomorrow afternoon and can leave for ZDayZ stress free, only to jump back into it on the 22nd.

kenchan · 05-10-2012, 02:21 PM

yah, spring, damper, sways are pretty easy to maintain once it's all set up. ive had endlinks fail and some springs sag (TEIN) in the past but swifts are higher-end than TEIN and linear rate so shouldn't be a problem.

i read one post in the suspension section about a leaking koni yellow. might want to follow that to see how the situation is resolved with the warranty replacement etc.

yellows are notorious for having bad lots from time to time. must be a european thing.

kenchan · 05-10-2012, 02:24 PM

here's the thread on the leaking one. another area to check is on the shell casing. pull up boot and see.

Leaking Brand New Koni Yellow

05-10-2012, 01:52 PM	#4368 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Ken, PSS are stiff but smooth. Super grippy but quiet. Soft compound but long lasting. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

05-10-2012, 02:06 PM	#4371 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Sway bars are very personal. Some like it stiff some like it soft. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

05-10-2012, 02:18 PM	#4378 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Swifts + Konis + Sways would be easy to maintain. The only thing I can think of is periodically checking to make sure the sway bar bushings are properly greased. On the 5.0 I am running a watts link which uses spherical rod-ends. I have to grease them every 2-4 weeks or so otherwise they squeak. Same with my lower control arms. Oh well... labor of love. Also, happy to announce I am ahead of schedule with this crap at work. I should have everything done by tomorrow afternoon and can leave for ZDayZ stress free, only to jump back into it on the 22nd. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Today was the day.....	Investr	Introduction	7	01-21-2012 08:56 PM
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 01:30 AM

05-10-2012, 02:09 PM	#4374 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	humm... maybe cut down on sugar intake?

05-10-2012, 02:21 PM	#4379 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, spring, damper, sways are pretty easy to maintain once it's all set up. ive had endlinks fail and some springs sag (TEIN) in the past but swifts are higher-end than TEIN and linear rate so shouldn't be a problem. i read one post in the suspension section about a leaking koni yellow. might want to follow that to see how the situation is resolved with the warranty replacement etc. yellows are notorious for having bad lots from time to time. must be a european thing.

05-10-2012, 02:24 PM	#4380 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	here's the thread on the leaking one. another area to check is on the shell casing. pull up boot and see. Leaking Brand New Koni Yellow