What did you do with your Z today III

alcheng · 04-18-2012, 05:57 PM

Quote:

Originally Posted by kenchan

disclaimer: btw, the last comment is a joke and not to be offensive. i just want to ensure the public that i was only kidding so no need to send nasty PM's that you can't send anyway since PM is blocked.

Mr.kenchan, you caught some fire recently, will you consider adding the disclaimer to your signature?? LOL

happytheman · 04-18-2012, 06:35 PM

Quote:

Originally Posted by kenchan

i probably wont have time to log in much later so goodnight to all!

Bye Mr. Ken-San!

Just finished giving her a nice, slow..bubbly bath!

I spent a good deal of time cleaning the wheels tonight. Every time I clean my wheels, I'm amazed by how much more clearance the rear wheels have between the wheel and the brakes!

I consider myself very fortunate to have, after 27k miles, VERY nearly PERFECT wheels. There are a couple of specs that are perhaps 1/2 a pinhead in size one each on two wheels..and that's IT! Nothing In the lug holes. There's not even any scratches on the barrel behind the wheel's spokes. No scratches where weights were replaced...no nothing!

Pintsize725 · 04-18-2012, 06:46 PM

Almost got t-boned a bit ago. Probably would have been my fault. But seriously, who slows down like they are about to turn and then speed up when I enter the intersection? Oh well, lesson learned: just wait until it's clear.

happytheman · 04-18-2012, 06:50 PM

Glad to hear nothing happened!

I'm a little OCD about going through intersections. I always assume someone else is coming from the other direction.

Pintsize725 · 04-18-2012, 06:58 PM

Quote:

Originally Posted by happytheman

Glad to hear nothing happened!

I'm a little OCD about going through intersections. I always assume someone else is coming from the other direction.

Thanks! I'm definitely changing my driving habits after that. I feel bad that I couldn't tell the guy that I was sorry.

happytheman · 04-18-2012, 07:00 PM

At least youre safe!

mhcoss · 04-18-2012, 07:45 PM

Quote:

Originally Posted by Pintsize725

Thanks! I'm definitely changing my driving habits after that. I feel bad that I couldn't tell the guy that I was sorry.

I think we've all learned that lesson. I had a friend driving once do the same where I would have been the one t-boned. I yelled at him a lot haha scared the #$$# out of me. Personally, even if someone is signaling I wait to see them actually initiate the turn because people forget their blinker is on a lot.

happytheman · 04-18-2012, 07:48 PM

pL4tiNumfi5t · 04-18-2012, 07:50 PM

Some items arrived, time to get serious about detailing

happytheman · 04-18-2012, 07:52 PM

Whoa a PC and a myriad of Adams products! Nice!

m4a1mustang · 04-18-2012, 08:00 PM

Quote:

Originally Posted by pL4tiNumfi5t

Some items arrived, time to get serious about detailing

Very nice!!!

onzedge · 04-18-2012, 08:05 PM

Quote:

Originally Posted by pL4tiNumfi5t

Some items arrived, time to get serious about detailing

Red__Zed · 04-18-2012, 08:06 PM

Quote:

Originally Posted by pL4tiNumfi5t

Some items arrived, time to get serious about detailing

bbigby64 · 04-18-2012, 08:35 PM

Quote:

Originally Posted by kenchan

hi bbigby- yah, i think im the one gating the format choices cause im using freeware for this freelance work, but they dont care about that. they pay me for content.

kinda like in the music industry where one can hum a tune into a smart phone, send the mp3 via email to the producers, and the producers make an entire ensemble out of it. the equipment doesn't matter for the initial humming.

i could use my notebook with Word to do these projects, but i prefer my MBP's nice screen..atleast for these projects i dont want to deal with pc's/windows.

and so far ive spent nothing since i already had the MBP and Libre is free.

can't beat that.

I don't blame you, man. You have a good setup ... one that you can trust. I feel the same way about my Linux, and Android systems. I only use Windows at work for office tasks, but for software development, we use Fedora Linux. At home, my entire family uses Linux. Don't need Windows. Don't miss it. Don't want it. A long time ago, I told Gates and Windows to

pL4tiNumfi5t · 04-18-2012, 08:37 PM

Thanks all! Looking forward to restoring my Z's finish.

04-18-2012, 06:50 PM	#919 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Glad to hear nothing happened! I'm a little OCD about going through intersections. I always assume someone else is coming from the other direction. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

04-18-2012, 07:00 PM	#921 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	At least youre safe! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

04-18-2012, 07:48 PM	#923 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	__________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

04-18-2012, 07:50 PM	#924 (permalink)
pL4tiNumfi5t Base Member Join Date: Nov 2010 Location: 520, AZ Posts: 120 Drives: 2020 Tacoma TRD Pro Rep Power: 14	Some items arrived, time to get serious about detailing __________________ Tanabe Medalion Touring w/Y-Pipe \| Berk HFCs \| Mishimoto Air Intake Kit \| aFe Pro Dry S Drop-ins \| EcuTek \| Z1 34R Oil Cooler \| RS-R Ti2000 \| KONI Yellow \| SPL \| Goodridge Phantom \| Kics \| GTMat \| WedsSport SA-55M \| Bridgestone S-04 DIY: 7AT Aux Power Outlet Relocate

04-18-2012, 07:52 PM	#925 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Whoa a PC and a myriad of Adams products! Nice! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

04-18-2012, 06:46 PM	#918 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211844	Almost got t-boned a bit ago. Probably would have been my fault. But seriously, who slows down like they are about to turn and then speed up when I enter the intersection? Oh well, lesson learned: just wait until it's clear.

04-18-2012, 08:37 PM	#930 (permalink)
pL4tiNumfi5t Base Member Join Date: Nov 2010 Location: 520, AZ Posts: 120 Drives: 2020 Tacoma TRD Pro Rep Power: 14	Thanks all! Looking forward to restoring my Z's finish. __________________ Tanabe Medalion Touring w/Y-Pipe \| Berk HFCs \| Mishimoto Air Intake Kit \| aFe Pro Dry S Drop-ins \| EcuTek \| Z1 34R Oil Cooler \| RS-R Ti2000 \| KONI Yellow \| SPL \| Goodridge Phantom \| Kics \| GTMat \| WedsSport SA-55M \| Bridgestone S-04 DIY: 7AT Aux Power Outlet Relocate

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Today was the day.....	Investr	Introduction	7	01-21-2012 07:56 PM
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 12:30 AM