What did you do with your Z today III

Pintsize725 · 06-07-2012, 12:30 PM

Quote:

Originally Posted by Red__Zed

She's trying to keep tires.

I personally recommend just running out the new tires and going all out when those wear out though.

Going all out = more costs down the line too. I might as well jump up to 20's since the price of the tires will be less than 19's!

kenchan · 06-07-2012, 12:30 PM

Quote:

Originally Posted by GaleForce

Looks good. Have you tried it out yet? Does the mic pick up any vibration or noise from the bar?

Edit - oops, I assumed this is for the mic...

my rode mic is coming in tomorrow. i will give it a shot plugging it into the gopro if it improves anything as there is a guy on youtube that appears to like the rode + hero2 combo. i got the videomic pro which is a stereo shot-gun mic.

i made the mount for the recorder too just in case i can't isolate the pedal noise when my shoe contacts them by using the new cupholder mount coming soon. i can rotate the mount on the rear bar, which is nice.

i may mount an adapter and put camera #2 facing the rear.

many options.

Quote:

Originally Posted by Pintsize725

Will that work with these tires?

Front Size

225/50ZR18XL 99Y B

Rear Size

245/45ZR18XL 100Y B

no, too narrow. areyou getting snow tires?

kenchan · 06-07-2012, 12:31 PM

Quote:

Originally Posted by Pintsize725

Going all out = more costs down the line too. I might as well jump up to 20's since the price of the tires will be less than 19's!

or just get spacers and lower your ride. that alone will make it look nicer. i will note that the car looks fine if you get the right offsets on stock ride height.

Red__Zed · 06-07-2012, 12:32 PM

Quote:

Originally Posted by Pintsize725

Going all out = more costs down the line too. I might as well jump up to 20's since the price of the tires will be less than 19's!

By all out I just mean going wider...I like 9.5/10.5

kenchan · 06-07-2012, 12:33 PM

Quote:

Originally Posted by Red__Zed

She's trying to keep tires.

I personally recommend just running out the new tires and going all out when those wear out though.

yah, dont bother with re-using stock tires. just get the right wheels and tires you really want pint, and keep them for a long time.

my G's wheel/tire is 1300 per corner. but ive had these wheels for like 7yrs now. tires have been re-wrapped a few times.

GaleForce · 06-07-2012, 12:38 PM

Quote:

Originally Posted by happytheman

Good morning all!

Yesterday was not a good day for me at all in terms of work. I blew out some settings remotely from another location that directly impacted two important switches, taking a number of important servers offline for an hour and a half.

Well, live and learn. Hopefully there isn't too much political blowback from it.

Good morning Brantly.

I'm guessing you'll be laying low at work for a couple of days. It's all good. We all make mistakes.

Quote:

Originally Posted by JARblue

Morning all

Off to work.

Someone needs to pick this up R2C MaxxFlow CAI **Blow Out Sale** FREE SHIPPING

Good day, Jar

Quote:

Originally Posted by m4a1mustang

Good morning guys.

Hello Steve

Have your work days mellowed at all?

Quote:

Originally Posted by JARblue

Totally meant to post last night but I came home to dead primary computer. No response at all, so I swapped out the power supply for one I know is good. Same thing... nothing.

It ended up being the damn power cord

I have never had that happen before, and I sure wasted a massive amount of time swapping out PS.

Mr. GaleForce, this one's for you.

Thanks for the pictures Jar. It looks great. I'll be putting it on my engine dress up list.

Quote:

Originally Posted by kenchan

Nice oil cap, JAR!

Hello everyone.

Good afternoon Mr.kenchan. I have been very busy here. Just getting to log on now.

Z related, I have a Stillen license plate bracket to install. And I'll be removing the front bumper so I can try to get a better fit with my front lip. Oh, and I'm still on the hunt for a body shop. I'm at the point now where I just need someone to clean it up and spray it. I can look after the installation.

Pintsize725 · 06-07-2012, 12:38 PM

Quote:

Originally Posted by Red__Zed

By all out I just mean going wider...I like 9.5/10.5

I'm for that if it fits with the sizes mentioned above. This is what I prefer to buy my PSS at since they aren't too bad on the pocketbook.

Quote:

Originally Posted by kenchan

yah, dont bother with re-using stock tires. just get the right wheels and tires you really want pint, and keep them for a long time.

my G's wheel/tire is 1300 per corner. but ive had these wheels for like 7yrs now. tires have been re-wrapped a few times.

Not stock, PSS but for the stock 18s.

kenchan · 06-07-2012, 12:40 PM

Quote:

Originally Posted by Pintsize725

Not stock, PSS but for the stock 18s.

i sugget you get spacers for now and just drive through your new tires.

then sell the spacers and get your new wheels/tires.

GaleForce · 06-07-2012, 12:40 PM

Quote:

Originally Posted by Pintsize725

Good day Ms.Pint

Pintsize725 · 06-07-2012, 12:43 PM

Thanks for the help peeps. But, screw it, I'm painting the crappy base wheels then.

GaleForce · 06-07-2012, 12:49 PM

Quote:

Originally Posted by kenchan

my rode mic is coming in tomorrow. i will give it a shot plugging it into the gopro if it improves anything as there is a guy on youtube that appears to like the rode + hero2 combo. i got the videomic pro which is a stereo shot-gun mic.

i made the mount for the recorder too just in case i can't isolate the pedal noise when my shoe contacts them by using the new cupholder mount coming soon. i can rotate the mount on the rear bar, which is nice.

i may mount an adapter and put camera #2 facing the rear.

many options.

no, too narrow. areyou getting snow tires?

Sounds like an awesome set up.

Thanks for doing the ground work for me. You'll have it all figured out and I'll be good to go once I get my GoPro at fathers day

kenchan · 06-07-2012, 12:55 PM

Quote:

Originally Posted by GaleForce

Sounds like an awesome set up.

Thanks for doing the ground work for me. You'll have it all figured out and I'll be good to go once I get my GoPro at fathers day

hahaha!

i should know a good solution by then.

kenchan · 06-07-2012, 01:28 PM

hey 2 new idiots made my ignore list today.

JARblue · 06-07-2012, 01:32 PM

Quote:

Originally Posted by kenchan

hey 2 new idiots made my ignore list today.

Congrats to them

kenchan · 06-07-2012, 01:32 PM

Quote:

Originally Posted by JARblue

Congrats to them

hahaha. yah, it's sad but keeps the site sane.

06-07-2012, 12:43 PM	#8740 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211844	Thanks for the help peeps. But, screw it, I'm painting the crappy base wheels then. __________________ Tracie

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Today was the day.....	Investr	Introduction	7	01-21-2012 08:56 PM
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 01:30 AM

06-07-2012, 01:28 PM	#8743 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	hey 2 new idiots made my ignore list today.