What did you do with your Z today III

kenchan · 06-05-2012, 01:37 PM

Quote:

Originally Posted by Pintsize725

Good luck bro!

+1 fire- you still after that camaro?

Lemers · 06-05-2012, 01:58 PM

Quote:

Originally Posted by kenchan

+1 fire- you still after that camaro?

He should get a GT500.

Huck · 06-05-2012, 02:13 PM

Afternoon everyone! I'm at the dealership trying to get my car fixed. My seat is doing that popping thing when you take a turn sometimes, and the hatch doesn't always release on the first click. Trying to get it covered under warranty, and Milton, my service rep, just said that they can't duplicate any of the problems so it can't be fixed

so now I'm sitting here talking to the service manager trying to get it taken care of. Keep your fingers crossed...

Sent from my iPhizzle using magic and new fangled science stuff

GaleForce · 06-05-2012, 02:16 PM

Quote:

Originally Posted by Pintsize725

Yay for the people loving you!

Are you driving with the kit on?

Looks like I'm taking my baby in to the dealership on Friday. Hope I don't fall in love with a newer version.

Oh hellz yeah! Ghetto I know, but it also helps show me any potential issues that I may have overlooked during installation, before I spend the time and money to get a proper fit and paint job.

Don't come to my local dealer. They have 4 different models and colour of Z just waiting for a new owner. The used 40th only has 7000 km! Sweet baby Jesus!

GaleForce · 06-05-2012, 02:19 PM

Quote:

Originally Posted by alcheng

Hey Mr.Alchemy,

Your Z is running good now???

Morning Ms.Pintsize725

Have you hubby drive it to the dealer this Fri..... he might come back with a newer version....

Steve

Morning Mr.GaleForce, will you be able to find out which body shops does the local Nissan/car dealers contract to?? It might works, eh???

Howdy Mr.onzedge... how's Opie recovering?? I believe must be getting good since under the good hands or Mrs.Dr. and you

Mr.Fire... I know you are tired, but don't forget to drop off the raccoons to the drunk-piano class at 1300...

Mr.kenchan!!!

Good Tuesday Everyone!!!!

Yes, did that. He is also the shop everyone local recommends. He's too busy with insurance work

I spoke with a show car fabricator. The guy he uses is in Perry Sound. 4 hours away from me... Highly, highly, recommended.

GaleForce · 06-05-2012, 02:21 PM

Quote:

Originally Posted by Alchemy

Peter, a guy from Forgestar had requested a few shots of my car awhile back. I finally got some to him yesterday and he just sent me an email back saying he will be using them for the Forgestar Facebook page and the Forgestar Blog

My baby is gettin a little exposure

Awesome! Maybe I should add Forgestar to my short list of wheel choices?!

GaleForce · 06-05-2012, 02:23 PM

Quote:

Originally Posted by Huck

Afternoon everyone! I'm at the dealership trying to get my car fixed. My seat is doing that popping thing when you take a turn sometimes, and the hatch doesn't always release on the first click. Trying to get it covered under warranty, and Milton, my service rep, just said that they can't duplicate any of the problems so it can't be fixed

so now I'm sitting here talking to the service manager trying to get it taken care of. Keep your fingers crossed...

Sent from my iPhizzle using magic and new fangled science stuff

The last two issues I had, the tech couldn't replicate. The tech then talked to me about the issues and said, no problem, we'll order the parts anyways. Awesome service so far. Hopefully your dealership looks after you.

Fire · 06-05-2012, 02:49 PM

Ok back. No real news. The dealer received the e-mail that my 2012 order was not picked up. I knew that. They don't have any info as to how these orders are going to be handled as 2013's. They don't know if they will be given preference or run alongside 2013 orders. They do want to reappraise my car and I can tell ya they best make me a decent offer else I'm done with them.

Fire · 06-05-2012, 02:50 PM

Quote:

Originally Posted by Lemers

He should get a GT500.

Sorry not a Ford person.

Lemers · 06-05-2012, 02:52 PM

Quote:

Originally Posted by Fire

Sorry not a Ford person.

Too bad you don't get a government bailout discount on the Chevy.

Pintsize725 · 06-05-2012, 02:52 PM

Quote:

Originally Posted by GaleForce

Oh hellz yeah! Ghetto I know, but it also helps show me any potential issues that I may have overlooked during installation, before I spend the time and money to get a proper fit and paint job.

Don't come to my local dealer. They have 4 different models and colour of Z just waiting for a new owner. The used 40th only has 7000 km! Sweet baby Jesus!

Get your ghetto on sir, I know I would!

I'm afraid the dealership I go to will have a new '12 blue in stock and then I'll be in negotiations again.

But you saw my ideas and I'm leaning towards that right now.

bbigby64 · 06-05-2012, 02:53 PM

Quote:

Originally Posted by Huck

Afternoon everyone! I'm at the dealership trying to get my car fixed. My seat is doing that popping thing when you take a turn sometimes, and the hatch doesn't always release on the first click. Trying to get it covered under warranty, and Milton, my service rep, just said that they can't duplicate any of the problems so it can't be fixed

so now I'm sitting here talking to the service manager trying to get it taken care of. Keep your fingers crossed...

Sent from my iPhizzle using magic and new fangled science stuff

I hope that they can fix it, man. Good luck!

Tribalpinoy91 · 06-05-2012, 02:54 PM

Quote:

Originally Posted by Fire

Sorry not a Ford person.

That makes two of us..But for me not entirely I still believe that Japanese manufacturer's primarily (Honda, Toyota, Nissan and their luxury lines) are top notch in reliability and quality. I do however would pick a American Truck over any japanese counterpart..

P.S. Detailed the interior of my Z today

happytheman · 06-05-2012, 03:18 PM

Quote:

Originally Posted by Huck

Afternoon everyone! I'm at the dealership trying to get my car fixed. My seat is doing that popping thing when you take a turn sometimes, and the hatch doesn't always release on the first click. Trying to get it covered under warranty, and Milton, my service rep, just said that they can't duplicate any of the problems so it can't be fixed

so now I'm sitting here talking to the service manager trying to get it taken care of. Keep your fingers crossed...

Sent from my iPhizzle using magic and new fangled science stuff

Hope they take care of you Huck. There's a TSB on the hatch spring, so they should replace it regardless.

kenchan · 06-05-2012, 03:36 PM

ordered up a saitech or watever it's called cup mount for my Z. it's going to hold my digital recorder while i take vids with the gopro.

now i need to get a mini clapper.

last week i just wrapped the bottom end of the recorder and stuff it into the cup holder. it worked very well to isolate noise.

06-05-2012, 02:13 PM	#8463 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Afternoon everyone! I'm at the dealership trying to get my car fixed. My seat is doing that popping thing when you take a turn sometimes, and the hatch doesn't always release on the first click. Trying to get it covered under warranty, and Milton, my service rep, just said that they can't duplicate any of the problems so it can't be fixed so now I'm sitting here talking to the service manager trying to get it taken care of. Keep your fingers crossed... Sent from my iPhizzle using magic and new fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

06-05-2012, 02:49 PM	#8468 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	Ok back. No real news. The dealer received the e-mail that my 2012 order was not picked up. I knew that. They don't have any info as to how these orders are going to be handled as 2013's. They don't know if they will be given preference or run alongside 2013 orders. They do want to reappraise my car and I can tell ya they best make me a decent offer else I'm done with them. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp Last edited by Fire; 06-05-2012 at 02:52 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Today was the day.....	Investr	Introduction	7	01-21-2012 08:56 PM
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 01:30 AM

06-05-2012, 03:36 PM	#8475 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	ordered up a saitech or watever it's called cup mount for my Z. it's going to hold my digital recorder while i take vids with the gopro. now i need to get a mini clapper. last week i just wrapped the bottom end of the recorder and stuff it into the cup holder. it worked very well to isolate noise.