What did you do with your Z today III

TerribleONE · 04-30-2012, 12:42 PM

Quote:

Originally Posted by 3SeventyZ

Looks like I'll be doing some exterior work soon...

bummer

m4a1mustang · 04-30-2012, 12:42 PM

Quote:

Originally Posted by onzedge

What the heck is wrong with people?!?!?!?!?!?!?

Put down your frigging cellphones/makeup/newspaper/laptop/beer and drive your car!!!!

This all could have been avoided if the Envoy was equipped with Super Sports.

onzedge · 04-30-2012, 12:47 PM

Quote:

Originally Posted by m4a1mustang

This all could have been avoided if the Envoy was equipped with Super Sports.

I had not considered that. I believe you may be correct. The reduced stopping distance the Pilot Super Sports (by Michelin) provide would have made the difference between a near miss and tragedy.

TheGreatOne · 04-30-2012, 12:47 PM

Oh that sucks 3seventyZ

When I lifted my car last night, I noticed this, I'm wondering how this could happen? From the occasional tire rubbing or I must of driven over something??

m4a1mustang · 04-30-2012, 12:51 PM

TGO, when you turn your wheel to the left (or fully to the right) does it make contact with that part of the fender liner?

GaleForce · 04-30-2012, 12:56 PM

Quote:

Originally Posted by kenchan

ahh, i see. anyway you got new sendors so, GL with the fill!

btw, on my G i dont intend to get it fixed. it's too old of a car to fix in the first place and for me, as long as i know when to fill, it doesn't bother me that much. hahaha.

Yeah, it's not worrisome. My warranty runs out in January 2013 and my Z goes into storage at the end of October, so it makes sense to get all the little things fixed while I can.

Quote:

Originally Posted by Z_Girl

You might have read this on another thread but me and a few friends (Super_RedZ and BeeMaaZ) went to the Motorsport Z-Car West Coast Nationals this weekend. Great event, met several cool guys and had a really fun day. It was great to see Zero also, thanks for the additional pics!

The day ended to all of our surprise when they called my name for 1st place of the 370Z stock division. I posted a few pics from the day but check out the thread Z-Car West Coast Nationals April 27-29, 2012 to see more.

Awesome! The hard work paid off

Quote:

Originally Posted by 3SeventyZ

Looks like I'll be doing some exterior work soon...

Boo! That sucks!

TheGreatOne · 04-30-2012, 01:00 PM

Quote:

Originally Posted by m4a1mustang

TGO, when you turn your wheel to the left (or fully to the right) does it make contact with that part of the fender liner?

Actually when I do a fully locked turn, I have heard a "pop" so that could have been rubbing...but its only happened on one side and I'm surprised...looks like someone chewed it or melted it lol

3SeventyZ · 04-30-2012, 01:06 PM

Quote:

Originally Posted by onzedge

What the heck is wrong with people?!?!?!?!?!?!?

Put down your frigging cellphones/makeup/newspaper/laptop/beer and drive your car!!!!

She never even hit the brakes..
Not to mention she almost rear ended me right before this..
..and ran me and the person I was following off the road..

alcheng · 04-30-2012, 01:08 PM

Good Afternoon Z fellows!! A regular Monday in here =

Cloudy weather, still manage to drive the Z to work... nice start for a Monday, still

LOL

Nothing much happen to the Z lately, but I've been thinking about putting another 5mm spacers on the rear. One question though, is it ok to add a 5mm spacer on top of the 10m studs-replacement one. I believe it should be ok.... correct me if I am wrong.

Quote:

Originally Posted by onzedge

I am working on a couple of short stories today -- they are really take-offs on a few movies (I did not see the movies, but am using their titles). They are:

"Michelin and Me" and "Life After Koni"

They are working titles, of course.

Mr.Onzedge, for the movie title, you can also consider "The Edge Identity".

Quote:

Originally Posted by kenchan

good morning, mr.zman!

yes, kinda drizzly this am here as well.

and the oil they laid down on the construction road actually tamed thing down quite a bit on the dust. the oil was dry enough that i could roll 5mph down the 50ft of doodoo and not kickup anything.

Mr.kenchan, nice to hear about the G is not getting messed up.

Quote:

Originally Posted by Pintsize725

Morning guys! Fingers crossed that I get to pick up a TDX tonight. Come on car gods.......

Hey Ms.Pintsize725, GL with the TDX!!!

Quote:

Originally Posted by onzedge

Here is a video of my son Taylor (techfracture) navigating his 1982 280zx around the cones at the Volvo Auto-X last Saturday. This ZX was one of mine once and he converted it to a turbo. Let me tell you this: It was incredibly difficult for me to hold onto the roof and operate the camera at the same time.

Quote:

Originally Posted by Z_Girl

You might have read this on another thread but me and a few friends (Super_RedZ and BeeMaaZ) went to the Motorsport Z-Car West Coast Nationals this weekend. Great event, met several cool guys and had a really fun day. It was great to see Zero also, thanks for the additional pics!

The day ended to all of our surprise when they called my name for 1st place of the 370Z stock division. I posted a few pics from the day but check out the thread Z-Car West Coast Nationals April 27-29, 2012 to see more.

Ms.Z_Girl, Congrats Congrats, nice ride always gets appreciation!!

Mr.3SeventyZ,

Good Luck with the repair and hopefully it wouldn't take long.

Quote:

Originally Posted by m4a1mustang

This all could have been avoided if the Envoy was equipped with Super Sports and a better driver.

Fixed

ZMan8 · 04-30-2012, 01:12 PM

Quote:

Originally Posted by m4a1mustang

TGO, when you turn your wheel to the left (or fully to the right) does it make contact with that part of the fender liner?

heard of guys complain that if they are lowered and run spacers in the front the wheel may rub the part that sticks out with the fastner.

kenchan · 04-30-2012, 02:14 PM

Quote:

Originally Posted by m4a1mustang

TGO, when you turn your wheel to the left (or fully to the right) does it make contact with that part of the fender liner?

thegreatone- yah, definitely looks like rubbing issue.

Quote:

Originally Posted by GaleForce

Yeah, it's not worrisome. My warranty runs out in January 2013 and my Z goes into storage at the end of October, so it makes sense to get all the little things fixed while I can.

that's a great idea, mr. gale

Quote:

Originally Posted by alcheng

Good Afternoon Z fellows!! A regular Monday in here =

Cloudy weather, still manage to drive the Z to work... nice start for a Monday, still

LOL

Nothing much happen to the Z lately, but I've been thinking about putting another 5mm spacers on the rear. One question though, is it ok to add a 5mm spacer on top of the 10m studs-replacement one. I believe it should be ok.... correct me if I am wrong.

Mr.kenchan, nice to hear about the G is not getting messed up.

hi mr.alcheng!

good to hear you got some motoring time this am.

you should be fine with the 5mm on top (between your spacer and your wheel, not between spacer and hub), but make sure you get at least 10mm of thread on the stud/lug. otherwise the thread could strip.

Quote:

Originally Posted by ZMan8

heard of guys complain that if they are lowered and run spacers in the front the wheel may rub the part that sticks out with the fastner.

yep, the car was not meant to ride on low offsets on the front.

onzedge · 04-30-2012, 02:25 PM

Quote:

Originally Posted by ZMan8

heard of guys complain that if they are lowered and run spacers in the front the wheel may rub the part that sticks out with the fastner.

I am on Swift Spec-R, Koni and 15 mm spacers with no problems (except for my face muscles that get cramped from the constant grinning when I drive).

m4a1mustang · 04-30-2012, 02:28 PM

Quote:

Originally Posted by onzedge

I am on Swift Spec-R, Koni and 15 mm spacers with no problems (except for my face muscles that get cramped from the constant grinning when I drive).

What tires are you using to hold your machine to the ground?

onzedge · 04-30-2012, 02:30 PM

Quote:

Originally Posted by m4a1mustang

What tires are you using to hold your machine to the ground?

Oh -- I forgot to mention the tires -- can you guess???

m4a1mustang · 04-30-2012, 02:31 PM

No clue, man. You're pretty quiet about your rubber.

04-30-2012, 12:47 PM	#2764 (permalink)
TheGreatOne A True Z Fanatic Join Date: Jan 2011 Location: Montreal, Canada Age: 47 Posts: 1,980 Drives: E60 BMW M5 Rep Power: 21	Oh that sucks 3seventyZ When I lifted my car last night, I noticed this, I'm wondering how this could happen? From the occasional tire rubbing or I must of driven over something?? __________________ 2017 SUBARU STI 2008 E60 M5 - SOLD 2010 40th Anniversary 370Z - SOLD (and missing her)

04-30-2012, 12:51 PM	#2765 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	TGO, when you turn your wheel to the left (or fully to the right) does it make contact with that part of the fender liner? __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

04-30-2012, 02:31 PM	#2775 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	No clue, man. You're pretty quiet about your rubber. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Today was the day.....	Investr	Introduction	7	01-21-2012 08:56 PM
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 06:14 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 01:30 AM