Best CAI's?

gtabaz · 03-14-2012, 03:02 AM

In your opinion what do you believe is the Best Cold Air intake on the market

Huck · 03-14-2012, 03:15 AM

As far as I know, the Stillen g3 cai's have the highest hp gain at 17.5hp. They also give the car a little bit more of a growl at WOT. I have a set, and installation was pretty easy. I love them.

Sent from my iPizzle using magic and new fangled science stuff.

ImportConvert · 03-14-2012, 03:30 AM

Quote:

Originally Posted by gtabaz

In your opinion what do you believe is the Best Cold Air intake on the market

Z1 Silicone Post-MAF Intake Hoses

+

Performance Air Filter - Performance Air Filter - Cosworth USA

Vbp6US · 03-14-2012, 04:00 AM

Quote:

Originally Posted by ImportConvert

Z1 Silicone Post-MAF Intake Hoses

+

Performance Air Filter - Performance Air Filter - Cosworth USA

Based on what? Power gains? Looks? I would love to see a dyno comparison to the G3s.

ImportConvert · 03-14-2012, 04:38 AM

Quote:

Originally Posted by Vbp6US

Based on what? Power gains? Looks? I would love to see a dyno comparison to the G3s.

I would, too, but the consensus is that it's within a few horses. For $200, that's pretty good. It also looks stock, which to me is a plus, and doesn't involve cutting anything. Put all that together, and 3-5bhp really doesn't matter to me. I just like having better hoses and filters under my hood, really. Not so worried about making more power, per se.

happytheman · 03-14-2012, 07:48 AM

Quote:

Originally Posted by ImportConvert

Z1 Silicone Post-MAF Intake Hoses

+

Performance Air Filter - Performance Air Filter - Cosworth USA

There's something to be said for not having to take your bumper off to clean the filter. Granted, it's only every 20-30k miles, but still.......

hansoac · 03-14-2012, 10:22 AM

TerribleONE · 03-14-2012, 10:22 AM

stillen gen 3's /thread...

kenchan · 03-14-2012, 02:23 PM

Quote:

Originally Posted by gtabaz

In your opinion what do you believe is the Best Cold Air intake on the market

stock with drop-ins (no joke).

UNKNOWN_370 · 03-14-2012, 02:28 PM

Quote:

Originally Posted by kenchan

stock with drop-ins (no joke).

Along with post mafs. It might only net at best 13hp to use this combination. But low end power loss is so minimal the car steel feels stock and the silicone truly keeps air cold which makes you feel some good boost at higher RPM's. CAI's recive more of the engines heat than post MAFS.

theDreamer · 03-14-2012, 02:33 PM

Quote:

Originally Posted by gtabaz

In your opinion what do you believe is the Best Cold Air intake on the market

Like others have said, best is relative.
Most HP = Stillen
Good HP but easy install = Injen
Easy install and some HP = drop in+post MAF

Final choice is forced induction.

tonythetiger · 03-14-2012, 02:34 PM

stillen!

scottIN · 03-14-2012, 02:40 PM

I'd looked at all the options and was pretty convinced I wanted to go with the Gen 3s. Found a few threads on the post MAFs from Z1 and a drop in (I went with K & N) and decided to go that route. $300-$400 less than a full intake, easier to install / clean and at least part of the gains. And pretty blue tubes, too.

In fact, FedEx just dropped off my filters a few minutes ago so I'm going to do the install tonight.

kenchan · 03-14-2012, 02:43 PM

the sad part about the drop-ins is that start to finish it only takes about 2min and no tools needed. not enough fun 'modding.'

yah, i run post-MAF tubes too (HPS)... black.

twinturbonet · 03-14-2012, 03:00 PM

Stillen's available for 11' Nismo by any chance?

03-14-2012, 03:02 AM	#1 (permalink)
gtabaz Base Member Join Date: Jan 2012 Location: New York Posts: 171 Drives: 2011 370z GunMetal S Rep Power: 13	Best CAI's? In your opinion what do you believe is the Best Cold Air intake on the market

03-14-2012, 03:15 AM	#2 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	As far as I know, the Stillen g3 cai's have the highest hp gain at 17.5hp. They also give the car a little bit more of a growl at WOT. I have a set, and installation was pretty easy. I love them. Sent from my iPizzle using magic and new fangled science stuff. __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

03-14-2012, 10:22 AM	#8 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	stillen gen 3's /thread... __________________ 638WHP 541WTQ @ 13.5PSI Build thread

03-14-2012, 02:34 PM	#12 (permalink)
tonythetiger A True Z Fanatic Join Date: Oct 2010 Location: SA, TX Posts: 1,035 Drives: 10 Nissan 370z PG MT Rep Power: 193	stillen! __________________ KWV3/Eibach/StillenG3/FI CBE+LTH+34Row/Uprev/SPL/SouthBendSS/QuaifeLSD/4.08/TommyKaira/Status/VolkZE40/AP Radical BBK/Seibon/Amuse/VIS/Sparco/WorksBellGTC/RJM/Nismo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another set of Modshack CAI's.....>>	Modshack	Intake/Exhaust	25	07-02-2010 05:31 PM
Injen CAI's?	Red370	Intake/Exhaust	31	08-11-2009 09:26 AM

03-14-2012, 10:22 AM	#7 (permalink)
hansoac Enthusiast Member Join Date: Feb 2011 Location: Toledo Posts: 497 Drives: 09 370z Sport CY Rep Power: 14

03-14-2012, 02:40 PM	#13 (permalink)
scottIN Track Member Join Date: Aug 2011 Location: New Castle, Indiana Posts: 764 Drives: '12 370Z Rep Power: 55	I'd looked at all the options and was pretty convinced I wanted to go with the Gen 3s. Found a few threads on the post MAFs from Z1 and a drop in (I went with K & N) and decided to go that route. $300-$400 less than a full intake, easier to install / clean and at least part of the gains. And pretty blue tubes, too. In fact, FedEx just dropped off my filters a few minutes ago so I'm going to do the install tonight.

03-14-2012, 02:43 PM	#14 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	the sad part about the drop-ins is that start to finish it only takes about 2min and no tools needed. not enough fun 'modding.' yah, i run post-MAF tubes too (HPS)... black.

03-14-2012, 03:00 PM	#15 (permalink)
twinturbonet Enthusiast Member Join Date: Mar 2012 Location: Miami, FL Age: 41 Posts: 335 Drives: 11' Z #024 - SFZCC Rep Power: 13	Stillen's available for 11' Nismo by any chance?