1200 Miles...FINALLY!!

Baer383 · 03-13-2012, 10:37 PM

Quote:

Originally Posted by ImportConvert

I am having all my fluids switched to Red Line synthetic (MT-85/diff/engine) and the NISMO oil filter installed this Thursday. The NISMO oil filter really is a sick piece of engineering from what I read about it.

The Nismo oil filter actually sucks,Purolator pure one has more pleats in it than any of the OE ones.

6MT · 03-13-2012, 10:37 PM

Quote:

Originally Posted by neko

Doing the happy dance!

Now to drop car off for an oil change then let her loose!

Time to red-line her!

nmjaxx9 · 03-13-2012, 10:46 PM

Quote:

Originally Posted by 6MT

Time to red-line her!

x2

Baer383 · 03-13-2012, 10:49 PM

Quote:

Originally Posted by 6MT

Time to red-line her!

It was time to red-line her when you left the dealer.

ImportConvert · 03-13-2012, 10:54 PM

Quote:

Originally Posted by Baer383

The Nismo oil filter actually sucks,Purolator pure one has more pleats in it than any of the OE ones.

Explain how the Veruspeed NISMO filter "sucks"?

Purolator has more media maybe, but that just hurts oil flow, and the media is homogenous while the Veruspeed uses a finer media near the core. Also, more media does not always = better filtration.

Baer383 · 03-13-2012, 10:58 PM

Quote:

Originally Posted by ImportConvert

Explain how the Veruspeed NISMO filter "sucks"?

Quote:

Originally Posted by Baer383

The Nismo oil filter actually sucks,Purolator pure one has more pleats in it than any of the OE ones.

See my Quote above.

Baer383 · 03-13-2012, 11:06 PM

Quote:

Originally Posted by ImportConvert

Explain how the Veruspeed NISMO filter "sucks"?

Purolator has more media maybe, but that just hurts oil flow, and the media is homogenous while the Veruspeed uses a finer media near the core. Also, more media does not always = better filtration.

Go ahead and use them (Veruspeed) I've seen the light and heard it's song and I'm not going back.

svt to 370z · 03-13-2012, 11:20 PM

import convert loves big words

ImportConvert · 03-13-2012, 11:41 PM

Quote:

Originally Posted by Baer383

Go ahead and use them (Veruspeed) I've seen the light and heard it's song and I'm not going back.

I'm more a fan of less pressure drop across the filter on a high rpm engine than I am of 0.5% more filtration efficacy.

Baer383 · 03-13-2012, 11:57 PM

Quote:

Originally Posted by ImportConvert

I'm more a fan of less pressure drop across the filter on a high rpm engine than I am of 0.5% more filtration efficacy.

Go ahead and use what you want,my 26 yrs of experience working on cars is just a hobby anyway.

ImportConvert · 03-14-2012, 12:23 AM

Quote:

Originally Posted by Baer383

Go ahead and use what you want,my 26 yrs of experience working on cars is just a hobby anyway.

So what are you saying is better about Purolator than Veruspeed? Have you seen the inside of a Veruspeed filter? I have not, nor can I find a cut-away online.

Polymorphic · 03-14-2012, 12:31 AM

100 miles left for me =D

Pauly · 03-18-2012, 04:58 AM

baer, i heard similar info about engines being pre-run at the factories. where could i find information that would validate this theory? dont get me wrong, im sure you have done your homework and are more knowledgeable about this than i am, i only ask because this concerns me greatly, since im picking up a new one next week.

Baer383 · 03-18-2012, 10:17 AM

Quote:

Originally Posted by Pauly

baer, i heard similar info about engines being pre-run at the factories. where could i find information that would validate this theory? dont get me wrong, im sure you have done your homework and are more knowledgeable about this than i am, i only ask because this concerns me greatly, since im picking up a new one next week.

When people refer to "break" in,they are referring to piston rings even if they don't realize it,your rings need to seal as quick as possible to get a hold of oil control issues ,there are other reasons on why engines use oil but I'm talking about "rings" ,the rest of the engine is for the most part broken in.

As far as getting info on factories and their break in procedure you would have to just google it and you will come up with some info ,but as to where to find it I don't know off hand(I busy putting in my SC).

Oh!! and by the way my engine has a little less than 5k miles on it and I'm putting a Stage 1.5 GTM Supercharger on it so I think my motor is broke in.

ImportConvert · 03-18-2012, 10:56 AM

Quote:

Originally Posted by Baer383

When people refer to "break" in,they are referring to piston rings even if they don't realize it,your rings need to seal as quick as possible to get a hold of oil control issues ,there are other reasons on why engines use oil but I'm talking about "rings" ,the rest of the engine is for the most part broken in.

As far as getting info on factories and their break in procedure you would have to just google it and you will come up with some info ,but as to where to find it I don't know off hand(I busy putting in my SC).

Oh!! and by the way my engine has a little less than 5k miles on it and I'm putting a Stage 1.5 GTM Supercharger on it so I think my motor is broke in.

GM runs LS7's on natural gas to around 2000rpm where they are dynoed, and the numbers extrapolated to ensure that each one makes 505 SAE NET. The engine is then shipped from Wixom to Bowling Green, where it is put in the Z06, and the car is driven through the factory off the line over a rumble-strip to the alignment verification machine, where the engines see on average 3800-4400rpm for a short period of time and the transmissions are run through the gears. Then the car is driven through a massive "car wash" looking setup that tests for leaks, and then onto the test-track out doors where the car is taken over all manner of un-even and rough pavement to test for rattles and squeaks. Then, to the CARE process for final inspection, then onto the trailer to your dealer.

That is the only process I am certain on. I am sure Nissan has a similar process, although I doubt they are that picky about their VQ37's to engine-dyno each one in such a manner.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Finally hit 10,000 miles...going into storage for 2yrs	drew	Nissan 370Z General Discussions	32	09-05-2011 02:09 PM
Oil Change at 1200 miles after Break-in	crazyyankfan	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	9	07-11-2011 09:35 AM
OEM 19" Rays Sport Package wheels and RE050A tires ONLY 4000 miles $1200.00	Charles@POWERTRIX	Parts for sale (Private Classifieds)	8	08-31-2010 04:07 PM
Nismo with 1200 miles pricing??	TX370'er	Nissan 370Z Pricing / Ordering Discussions	5	11-14-2009 02:04 AM
finally hit 1200 miles!	mattkim85	Nissan 370Z General Discussions	20	01-25-2009 10:43 PM

03-13-2012, 11:20 PM	#23 (permalink)
svt to 370z Base Member Join Date: May 2011 Location: berea,oh Posts: 139 Drives: 09 red 370z 6mt Rep Power: 14	import convert loves big words

03-14-2012, 12:31 AM	#27 (permalink)
Polymorphic Base Member Join Date: Feb 2012 Location: Albuquerque Posts: 51 Drives: 370z GM 6MT Rep Power: 13	100 miles left for me =D

03-18-2012, 04:58 AM	#28 (permalink)
Pauly Track Member Join Date: Feb 2012 Location: Lafayette, La Posts: 645 Drives: and parks Rep Power: 14	baer, i heard similar info about engines being pre-run at the factories. where could i find information that would validate this theory? dont get me wrong, im sure you have done your homework and are more knowledgeable about this than i am, i only ask because this concerns me greatly, since im picking up a new one next week.