"ICY" setting on the 370z 7at?

UNKNOWN_370 · 03-11-2012, 07:10 PM

So I'm in my car resetting the rev limit from Redline to 7200rpm for automatic shifting. The way to do this is by going to "Alert" scroll to upshift and from there you set it. There are 2 more settings. Timer? Which if anyone knows what's that for I would like to know too... but after that. Its ICY? IS THAT A MODE FOR icy conditions on the 2011? Thanks in advance and rep for the answer.

Chan Chee Hoe · 03-11-2012, 07:32 PM

"ICY" means if the temperture outside drop below 5'C,the warning will tell you to to slow down,because below that temperture,"Black ice" will form on the road.

red6spd · 03-11-2012, 08:03 PM

^^^ Yea I think its just there to turn on or off. Just a word on the dash it does not change anything.

Augustus · 03-11-2012, 08:18 PM

If the ICY warning is on, the display will pop a warning when the temp is lower than 37 (or whatever). It will override whatever display mode its in, just like if you were to open a door or like when the low fuel alert is triggered.

When it's off, you still get an ICY indicator on the temp display, but it won't pop the warning.

sonic370 · 03-11-2012, 09:06 PM

i didn't know there was a way to set rev limit's on the AT transmission
as the MT trans. is that correct?

UNKNOWN_370 · 03-11-2012, 09:52 PM

Quote:

Originally Posted by sonic370

i didn't know there was a way to set rev limit's on the AT transmission
as the MT trans. is that correct?

On the 2011 and up you can.

Augustus · 03-11-2012, 09:58 PM

Quote:

Originally Posted by UNKNOWN_370

On the 2011 and up you can.

Seriously? The rev indicator light setting actually effects where the AT shifts on the 2011+? That's pretty neat. So you can set it for 2,000 RPM, floor it, and the AT will still shift at 2k?

I would have thought that it just lit up the RPM warning light as it does in the MT.

UNKNOWN_370 · 03-11-2012, 10:45 PM

Quote:

Originally Posted by Augustus

Seriously? The rev indicator light setting actually effects where the AT shifts on the 2011+? That's pretty neat. So you can set it for 2,000 RPM, floor it, and the AT will still shift at 2k?

I would have thought that it just lit up the RPM warning light as it does in the MT.

You know what? I would have to check that for sure because I just set it but didn't use it. Tomorrow I willhit 7200rpm and let you know for sure. I hope it works that way?

Dark Sarcasm · 03-11-2012, 10:46 PM

the setting in the instrument cluster doesnt change when the trans will shift. It only changes when the little red "REV" light starts blinking. You can set it between 6500 and redline.

UNKNOWN_370 · 03-11-2012, 10:48 PM

Quote:

Originally Posted by Dark Sarcasm

the setting in the instrument cluster doesnt change when the trans will shift. It only changes when the little red "REV" light starts blinking. You can set it between 6500 and redline.

When I set mine I cycled through the rpm settings from 1000 to 7800rpm. So how did you get 6500 as a base setting?

DWS44 · 03-12-2012, 01:30 PM

Quote:

Originally Posted by UNKNOWN_370

When I set mine I cycled through the rpm settings from 1000 to 7800rpm. So how did you get 6500 as a base setting?

You can set it much lower than 6500 if you want...at least on my 6MT, you can.

EazyD · 03-12-2012, 08:16 PM

It only affects when the light starts blinking. And "ICY" is just an alert when it gets below a temperature that you can set. By default, it's set to a temp that's above freezing, so I don't get why it comes that way.

UNKNOWN_370 · 03-12-2012, 08:34 PM

Quote:

Originally Posted by DWS44

You can set it much lower than 6500 if you want...at least on my 6MT, you can.

I just made a thread... 7at thread limiter. Check it out. Id like to make a correction right here. I redid the limiter. It goes from 1000-9000rpm. How cool is that? I know the Z would probably explode at 9krpm but I think we'd be good to about 8500rpm modified. Safely 8100rpm

03-11-2012, 07:10 PM	#1 (permalink)
UNKNOWN_370 A True Z Fanatic Join Date: Jul 2009 Location: ny'r livn in tx Posts: 8,687 Drives: well over 130m.p.h. Rep Power: 14858	"ICY" setting on the 370z 7at? So I'm in my car resetting the rev limit from Redline to 7200rpm for automatic shifting. The way to do this is by going to "Alert" scroll to upshift and from there you set it. There are 2 more settings. Timer? Which if anyone knows what's that for I would like to know too... but after that. Its ICY? IS THAT A MODE FOR icy conditions on the 2011? Thanks in advance and rep for the answer.

03-11-2012, 08:03 PM	#3 (permalink)
red6spd A True Z Fanatic Join Date: Apr 2010 Location: Long Island NY Posts: 3,277 Drives: 2010 Z Coupe M6 SPT Rep Power: 21	^^^ Yea I think its just there to turn on or off. Just a word on the dash it does not change anything. __________________ 2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness. ???Whp ???WTQ (Will find out come spring time)

03-11-2012, 10:46 PM	#9 (permalink)
Dark Sarcasm Track Member Join Date: Dec 2010 Location: Katy Texas Posts: 552 Drives: 11 CTS-V Coupe Rep Power: 16	the setting in the instrument cluster doesnt change when the trans will shift. It only changes when the little red "REV" light starts blinking. You can set it between 6500 and redline. __________________ wax

03-12-2012, 08:16 PM	#12 (permalink)
EazyD A True Z Fanatic Join Date: Nov 2009 Location: Massachusetts, USA Posts: 1,211 Drives: 2010 6MT Sport pkg. Rep Power: 26	It only affects when the light starts blinking. And "ICY" is just an alert when it gets below a temperature that you can set. By default, it's set to a temp that's above freezing, so I don't get why it comes that way. __________________ Pearl White 2010 370Z Sport, Stillen CBE, tint, K&N drop-in filters, GT-R start button, Kenwood DNX-6980 with backup cam, LED bulbs, Raceseng shift knob.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
When did "Z" replace "Nissan" logo on key fobs?	AlphaSnacks	Nissan 370Z General Discussions	23	03-27-2011 11:47 PM
I guess this will be my "build thread" or..."journal?"... atx370z	atx370z	Member's 370Z Gallery	15	09-15-2010 01:10 PM
"Dancing with the Dealer" with the 40th - hope to be in the "New Owner" section soon	optiontrader	New Forum Member	8	08-04-2010 12:37 AM
"Warning" Carbon Fiber Z emblems "DO NOT FIT"	NXTAZEE	Exterior & Interior	2	12-20-2009 04:49 AM
Break in - drive it "hard" or "be gentle"?	kannibul	Engine & Drivetrain	3	06-06-2009 02:51 AM

03-11-2012, 07:32 PM	#2 (permalink)
Chan Chee Hoe Track Member Join Date: Mar 2009 Location: Singapore Posts: 861 Drives: 370z,Yellow,7sp A Rep Power: 17	"ICY" means if the temperture outside drop below 5'C,the warning will tell you to to slow down,because below that temperture,"Black ice" will form on the road.

03-11-2012, 08:18 PM	#4 (permalink)
Augustus Base Member Join Date: Jan 2012 Location: Illinois Posts: 146 Drives: 2011 370Z Touring M6 Rep Power: 13	If the ICY warning is on, the display will pop a warning when the temp is lower than 37 (or whatever). It will override whatever display mode its in, just like if you were to open a door or like when the low fuel alert is triggered. When it's off, you still get an ICY indicator on the temp display, but it won't pop the warning.

03-11-2012, 09:06 PM	#5 (permalink)
sonic370 A True Z Fanatic Join Date: May 2010 Location: Orange Texas Posts: 1,574 Drives: 09 370Z Sports PGK Rep Power: 18	i didn't know there was a way to set rev limit's on the AT transmission as the MT trans. is that correct?