How do u guys drive ur z?

LakeShow · 04-17-2012, 11:12 PM

Mine sits on a rotating platform in my living room and roped off.

Dsevast · 04-19-2012, 10:53 AM

Quote:

Originally Posted by LakeShow

Mine sits on a rotating platform in my living room and roped off.

Hahaha this made me lol

MacLean · 04-19-2012, 05:56 PM

Quote:

Originally Posted by LakeShow

Mine sits on a rotating platform in my living room and roped off.

Quote:

Originally Posted by Dsevast

Hahaha this made me lol

+1........ Pretty funny.

B&W_Evader · 04-20-2012, 10:24 AM

I have 4 modes...

Cold (oil temp under 160) Babied - keeping the engine between 2200 and 3300
Warm and in traffic, Highest gear without getting the rpm below 2000
Warm and open road, 3000-6000.
Pushing it will get the shift light to come on occasionally. Can't do much of this yet since my oil cooler isn't in yet.

Drive hard but be gentle. Thashing on a car by snapping the clutch, 2nd gear chirps, etc will distroy her. Trust me, I did this on my first 4 cars. It's a ton of fun and they'll take it for a long time. You will have higher maintenance costs, and you will distroy her in the long run. Redlining will reduce life and cause loss of power over time but rings and cams are not that difficult to replace. Cornering just wears out tires ball joints and bearings. Easy to replace. But rattles never go away. Loose drivelines, noisy rear ends and broken transmissions get expensive really quick.

keb370z · 04-20-2012, 11:16 AM

I drive like a total a$$ because it's what people expect when they see my car's hotness. I can't let the public down.

(100th post! Man they add up fast.)

bdavis89 · 04-20-2012, 11:35 AM

Quote:

Originally Posted by B&W_Evader

I have 4 modes...

Cold (oil temp under 160) Babied - keeping the engine between 2200 and 3300
Warm and in traffic, Highest gear without getting the rpm below 2000
Warm and open road, 3000-6000.
Pushing it will get the shift light to come on occasionally. Can't do much of this yet since my oil cooler isn't in yet.

This.

Cold - Shift before 3k
Warm Water, cold oil - Shift before 4k
Warm overall - have fun

JARblue · 04-19-2012, 11:16 AM

+1

My wife drives the Z very respectfully. I drive the Z like it wants to be driven

I think Project Weekend Mistress about sums it up.

04-17-2012, 11:12 PM	#1 (permalink)
LakeShow A True Z Fanatic Join Date: Dec 2010 Location: L.I., NY Posts: 5,307 Drives: Everything Rep Power: 26	Mine sits on a rotating platform in my living room and roped off. __________________ \|2013 Audi S4\|Ibis White/Black\|S-Tronic P+\| \|2013 370z\|PearlWhite/Persimmon\|Touring/Sport/Nav\|F.I. CBE 18" CF\| \|Sold\|2011 370z\|Gun Metallic\|Touring/Sport/Nav\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Some Z guys don't respect other Z guys	wdkwang	Nissan 370Z General Discussions	157	07-22-2011 05:25 PM
hey guys i'm new here	Z RATED OKC	New Forum Member	7	02-05-2011 02:40 PM
It's been fun guys!	fins	Nissan 370Z General Discussions	34	01-22-2011 10:51 PM
what do you guys think should i do it?	zuperman 370	Exterior & Interior	13	01-17-2011 06:07 PM
Guys, guys, I found a new Z!	nuTinmuch	The Lounge (Off Topic)	10	03-14-2010 09:11 PM

04-20-2012, 10:24 AM	#4 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 387	I have 4 modes... Cold (oil temp under 160) Babied - keeping the engine between 2200 and 3300 Warm and in traffic, Highest gear without getting the rpm below 2000 Warm and open road, 3000-6000. Pushing it will get the shift light to come on occasionally. Can't do much of this yet since my oil cooler isn't in yet. Drive hard but be gentle. Thashing on a car by snapping the clutch, 2nd gear chirps, etc will distroy her. Trust me, I did this on my first 4 cars. It's a ton of fun and they'll take it for a long time. You will have higher maintenance costs, and you will distroy her in the long run. Redlining will reduce life and cause loss of power over time but rings and cams are not that difficult to replace. Cornering just wears out tires ball joints and bearings. Easy to replace. But rattles never go away. Loose drivelines, noisy rear ends and broken transmissions get expensive really quick.

04-20-2012, 11:16 AM	#5 (permalink)
keb370z Base Member Join Date: Jan 2012 Location: St. Louis, MO Posts: 214 Drives: '11 M6 Sport in Blue Rep Power: 14	I drive like a total a$$ because it's what people expect when they see my car's hotness. I can't let the public down. (100th post! Man they add up fast.)

04-19-2012, 11:16 AM	#7 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	+1 My wife drives the Z very respectfully. I drive the Z like it wants to be driven I think Project Weekend Mistress about sums it up.