Help! Stillen G3 error!!

Unique_Z · 01-23-2012, 03:09 PM

As i've stated above, i had already installed the G3 and the installation went perfectly..untill i drove off my installer's shop. The CEL, VDC and Slip lights up and i cant rev past 2.5k!! Further more the car keep on shutting down itself and i have to rev it to keep it running..any idea what happened? Let me know. Thanks

PapoZalsa · 01-23-2012, 03:11 PM

Probably is better to post this in the Tech Area. GL

SPOHN · 01-23-2012, 03:17 PM

Sounds like limp mode. Was the G3's the only thing you had done or the only thing touched by anyone. Make sure the MAF's are clean and then disconnect the battery for 10 minutes to reset the SES.

xdeslitx · 01-23-2012, 03:26 PM

sounds like what happened to me with my Injens. was it raining?

SPOHN · 01-23-2012, 03:41 PM

Quote:

Originally Posted by xdeslitx

sounds like what happened to me with my Injens. was it raining?

He has the Stillen Gen 3's so I wouldn't think rain would of been a factor.

LMBmikeZ · 01-23-2012, 03:41 PM

That would be my guess to. Try looking at the MAFs they might even be lose/disconnected.

xdeslitx · 01-23-2012, 04:08 PM

Quote:

Originally Posted by SPOHN

He has the Stillen Gen 3's so I wouldn't think rain would of been a factor.

just because he has G3s doesn't mean he would be immune to the problems that rain could cause

ClemsonWill · 01-23-2012, 04:18 PM

make sure all the cuplings are secure and sealed. After I put my G3s on, one of them slipped off the throttle body. I was having similar issues. Everything looked fine from the top but when I reached underneath I could tell it popped off. Easy fix and everything has been fine since.

SPOHN · 01-23-2012, 04:19 PM

Quote:

Originally Posted by xdeslitx

just because he has G3s doesn't mean he would be immune to the problems that rain could cause

There's always a possibility. But doubtful. I've driven in the worst of rain staright to the shop just to take my bumper off and not a drop in the area of the filters.

SPOHN · 01-23-2012, 04:20 PM

Quote:

Originally Posted by ClemsonWill

make sure all the cuplings are secure and sealed. After I put my G3s on, one of them slipped off the throttle body. I was having similar issues. Everything looked fine from the top but when I reached underneath I could tell it popped off. Easy fix and everything has been fine since.

This! I've had that happen once. Those couplings can be tricky believe it or not. It's real fun when your boosting and it happens. I'll never forget that day.

Unique_Z · 01-23-2012, 05:16 PM

Thanks for the replies everyone! But unfortunately none of these works for me. I've tried disconnecting the battery for an hour. Re-tighting the couplings and wipe clean the sensors..maybe its the AF ratio? Bcz it suddenly dies after a couple of seconds idling..

Unique_Z · 01-23-2012, 05:23 PM

And yeah i forgot to add, it was not raining at that time in fact it's actually a hot mid day..

370Ztune · 01-23-2012, 05:23 PM

MAF sensors are in backwards, plugs going to MAFs are loose or swapped (left to right, right to left).

You might also have a bad vacuum leak - loose coupler, filter etc.

SPOHN · 01-23-2012, 05:26 PM

Mmmmm. What did you wipe the MAF with exactly? Guess it's time for the scanner? Did you do the install?

Unique_Z · 01-23-2012, 05:49 PM

Quote:

Originally Posted by 370Ztune

MAF sensors are in backwards, plugs going to MAFs are loose or swapped (left to right, right to left).

You might also have a bad vacuum leak - loose coupler, filter etc.

Quote:

Originally Posted by SPOHN

Mmmmm. What did you wipe the MAF with exactly? Guess it's time for the scanner? Did you do the install?

I've triple checked the MAF sensors and and tried putting it backwards and they didnt align at all so that prolly not the case. And they are certainly not loose either..i wiped it with microfiber towel and no i did not. One of the installer of the most reputable shop in my country installed it for me..

01-23-2012, 03:09 PM	#1 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	Help! Stillen G3 error!! As i've stated above, i had already installed the G3 and the installation went perfectly..untill i drove off my installer's shop. The CEL, VDC and Slip lights up and i cant rev past 2.5k!! Further more the car keep on shutting down itself and i have to rev it to keep it running..any idea what happened? Let me know. Thanks __________________ My Z Build UniqueZ

01-23-2012, 03:11 PM	#2 (permalink)
PapoZalsa A True Z Fanatic Join Date: Nov 2009 Location: Not in Sunny Florida Posts: 6,358 Drives: 16 Nismo w/Tech Pack Rep Power: 4500	Probably is better to post this in the Tech Area. GL __________________ 2009 370Z MB Base w/Sport Package 6MT Modshack's Custom Air Intakes /3M Clear Bra/ Illuminated Kick Plates / F. I CBE w/12" resonators / EVO-R Front Lip / Rear Hatch Wing / Tein S-Tech Springs /Ilegal Tint in the Rep. of VA/4x20mm Z1 Spacers/ Vinyl Roof/Liquid Carbon Designs

01-23-2012, 03:17 PM	#3 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Sounds like limp mode. Was the G3's the only thing you had done or the only thing touched by anyone. Make sure the MAF's are clean and then disconnect the battery for 10 minutes to reset the SES. __________________

01-23-2012, 03:41 PM	#6 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	That would be my guess to. Try looking at the MAFs they might even be lose/disconnected. __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

01-23-2012, 04:18 PM	#8 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	make sure all the cuplings are secure and sealed. After I put my G3s on, one of them slipped off the throttle body. I was having similar issues. Everything looked fine from the top but when I reached underneath I could tell it popped off. Easy fix and everything has been fine since. __________________ Slightly modded

01-23-2012, 03:26 PM	#4 (permalink)
xdeslitx A True Z Fanatic Join Date: Jul 2010 Location: Tu-jungle, CA Posts: 13,045 Drives: Yaris Rep Power: 63	sounds like what happened to me with my Injens. was it raining?

01-23-2012, 05:16 PM	#11 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	Thanks for the replies everyone! But unfortunately none of these works for me. I've tried disconnecting the battery for an hour. Re-tighting the couplings and wipe clean the sensors..maybe its the AF ratio? Bcz it suddenly dies after a couple of seconds idling.. __________________ My Z Build UniqueZ

01-23-2012, 05:23 PM	#12 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	And yeah i forgot to add, it was not raining at that time in fact it's actually a hot mid day.. __________________ My Z Build UniqueZ

01-23-2012, 05:23 PM	#13 (permalink)
370Ztune The370Z.com Sponsor Join Date: Jan 2009 Location: Los Angeles, CA Posts: 2,477 Drives: Z34 370Z Rep Power: 46	MAF sensors are in backwards, plugs going to MAFs are loose or swapped (left to right, right to left). You might also have a bad vacuum leak - loose coupler, filter etc. __________________ The Real JDM Facebook Bulletproof Instagram

01-23-2012, 05:26 PM	#14 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Mmmmm. What did you wipe the MAF with exactly? Guess it's time for the scanner? Did you do the install? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan consult3 diagnostic error? You Pay?	fritz	Engine & Drivetrain	13	10-21-2014 01:35 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM
Database error??	dixon cider	The370Z.com Feedback, Suggestions & Questions	31	11-24-2010 02:35 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 01:53 PM