Those of you who have had Steering Lock Failure

LMBmikeZ · 11-19-2012, 07:59 PM

It's something you should take care of if you have one still, it is not needed and it will cause you more frustration and $ in the end if you don't get rid of it ASAP!

USMCASA · 11-19-2012, 08:04 PM

Quote:

Originally Posted by pseftis

40th anni 370z's classified early 2010 models? any 40th with these issues?

yes there is one documented 40th with this issue.

LMBmikeZ · 11-19-2012, 08:09 PM

The 40th is no different then any other Z though it's the same car just with a few add on features. The steering lock is the same rev as any other so it will be just as prone to the problems as any other 09, 10 or 2011 Z. So again I would suggest getting that F*CKING stupid lock taken care of before you find yourself stranded like some others have been!

onzedge · 11-19-2012, 08:37 PM

Quote:

Originally Posted by pseftis

40th anni 370z's classified early 2010 models? any 40th with these issues?

As I posted a few back, my steering lock mechanism failed and it's a 40th. I am also having the fuel gauge sender problem.

pseftis · 11-19-2012, 08:50 PM

Quote:

Originally Posted by onzedge

As I posted a few back, my sttering lock mechanism failed and it's a 40th. I am also having the fuel gauge sender problem.

Mt Tam I am · 11-19-2012, 10:27 PM

Quote:

Originally Posted by LMBmikeZ

The 40th is no different then any other Z though it's the same car just with a few add on features. The steering lock is the same rev as any other so it will be just as prone to the problems as any other 09, 10 or 2011 Z. So again I would suggest getting that F*CKING stupid lock taken care of before you find yourself stranded like some others have been!

I like this post.

Crashley · 11-19-2012, 11:53 PM

Mine took its dive on Friday last week :/

25225 when failed
2010 40th Anniversary
Listed as "steering lock assembly has internal failure, replaced steering lock assembly"

Thankfully I am still under warranty! My dealership was prepared I guess, because they got it in around noon and I had it back at 4.

Guess I can be added to the list as the 2nd 40th to experience this issue. I just recently found this thread so maybe someone could tell me....are there many 2010 models that have had this happen?

Mt Tam I am · 11-20-2012, 09:40 AM

Quote:

Originally Posted by Crashley

Mine took its dive on Friday last week :/

25225 when failed
2010 40th Anniversary
Listed as "steering lock assembly has internal failure, replaced steering lock assembly"

Thankfully I am still under warranty! My dealership was prepared I guess, because they got it in around noon and I had it back at 4.

Guess I can be added to the list as the 2nd 40th to experience this issue. I just recently found this thread so maybe someone could tell me....are there many 2010 models that have had this happen?

Will you pull the fuse now?

Crashley · 11-20-2012, 10:47 AM

Quote:

Originally Posted by Mt Tam I am

Will you pull the fuse now?

If its as useless as everyone claims I might as well.

DLSTR · 11-20-2012, 02:41 PM

Quote:

Originally Posted by Crashley

If its as useless as everyone claims I might as well.

The current Z -2013 does not have it....so dont delay.

jsimms243 · 11-20-2012, 06:55 PM

My 2010 40th Anniversary went out yesterday. I'm around 38,000-40,000 miles. I'm told I'm outside my warranty (36,000) and it will cost of over $1,000.

jsimms243 · 11-20-2012, 06:55 PM

Quote:

Originally Posted by jsimms243

My 2010 40th Anniversary went out yesterday. I'm around 38,000-40,000 miles. I'm told I'm outside my warranty (36,000) and it will cost of over $1,000.

My "steering lock control unit" went out, that is.

LMBmikeZ · 11-20-2012, 08:02 PM

Quote:

Originally Posted by Crashley

Mine took its dive on Friday last week :/

25225 when failed
2010 40th Anniversary
Listed as "steering lock assembly has internal failure, replaced steering lock assembly"

Thankfully I am still under warranty! My dealership was prepared I guess, because they got it in around noon and I had it back at 4.

Guess I can be added to the list as the 2nd 40th to experience this issue. I just recently found this thread so maybe someone could tell me....are there many 2010 models that have had this happen?

I am sure that there's been more then the three 40ths that have had this issue.

Quote:

Originally Posted by Crashley

If its as useless as everyone claims I might as well.

There's many ways you can eliminate the problem (3 to be exact). You can pull the fuse, cut the brown wire or buy the harness from bdl99 at the carkitcompany.com

all ways to eliminate that stupid steering lock!

Crashley · 11-20-2012, 09:46 PM

Quote:

Originally Posted by LMBmikeZ

I am sure that there's been more then the three 40ths that have had this issue.

True, however I was really just curious about the 2010 models on general.

There's many ways you can eliminate the problem (3 to be exact). You can pull the fuse, cut the brown wire or buy the harness from bdl99 at the carkitcompany.com

all ways to eliminate that stupid steering lock!

Pulling the fuse is the easiest route, so I think that'll be my fix

cossie1600 · 11-25-2012, 01:57 PM

Mine failed, luckily still within warranty. I had a repair schedule for Monday anyway, I guess the car will now get an entrance with a flat bed. I was going to pull the fuse, but kept putting it off as it has been cold. I guess I will at least have a good one so I can rip it off and part it out later if possible

11-19-2012, 07:59 PM	#241 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	It's something you should take care of if you have one still, it is not needed and it will cause you more frustration and $ in the end if you don't get rid of it ASAP! __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

11-19-2012, 08:09 PM	#243 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	The 40th is no different then any other Z though it's the same car just with a few add on features. The steering lock is the same rev as any other so it will be just as prone to the problems as any other 09, 10 or 2011 Z. So again I would suggest getting that F*CKING stupid lock taken care of before you find yourself stranded like some others have been! Mt Tam I am and Baer383 like this. __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering lock failure	Terrace	Canada	52	06-16-2013 10:32 PM
[WTB] steering lock assembly	bfowlzr33	Parts for sale (Private Classifieds)	7	11-19-2012 02:52 PM
Steering Lock Elimination	Vince	Exterior & Interior	38	05-18-2012 11:43 AM
Steering lock repair	fritz	DIY Section (Do-It-Yourself)	38	02-22-2012 10:30 PM
steering wheel lock	rosankyslim	Exterior & Interior	4	01-19-2012 04:43 PM

11-19-2012, 11:53 PM	#247 (permalink)
Crashley Base Member Join Date: Jul 2010 Location: San Antonio Posts: 7 Drives: 10 Nissan 370Z Rep Power: 15	Mine took its dive on Friday last week :/ 25225 when failed 2010 40th Anniversary Listed as "steering lock assembly has internal failure, replaced steering lock assembly" Thankfully I am still under warranty! My dealership was prepared I guess, because they got it in around noon and I had it back at 4. Guess I can be added to the list as the 2nd 40th to experience this issue. I just recently found this thread so maybe someone could tell me....are there many 2010 models that have had this happen?

11-20-2012, 06:55 PM	#251 (permalink)
jsimms243 Base Member Join Date: Dec 2011 Location: Alabama Posts: 13 Drives: 370z 40th Anniv. Rep Power: 14	My 2010 40th Anniversary went out yesterday. I'm around 38,000-40,000 miles. I'm told I'm outside my warranty (36,000) and it will cost of over $1,000.

11-25-2012, 01:57 PM	#255 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	Mine failed, luckily still within warranty. I had a repair schedule for Monday anyway, I guess the car will now get an entrance with a flat bed. I was going to pull the fuse, but kept putting it off as it has been cold. I guess I will at least have a good one so I can rip it off and part it out later if possible