What did you do with your Z today II

Dembflyr · 03-26-2012, 08:46 PM

Oil change, rear camber arms and a quick wash today. Tomorrow I go get my RE-11's installed.

No exhaust this month. Hopefully early April.

nepali · 03-26-2012, 09:18 PM

Just got done washing/waxing my car! Man, I am tired! I had to do it because the weekend trip left a lot of bugs on the front bumper and windshield. I still can't get rid of 2-3 little spots...it's like they are embedded in there...ugh! Also found few rock chips!

kenchan · 03-26-2012, 09:24 PM

Quote:

Originally Posted by alcheng

not sure about tapered lugs, but they have to use smaller size lugs because the lug-hole on the vossen is smaller than OEM.

Yah, if you have smaller lugs you're fine mr.alcheng!

Hubcentric lugs are huge in comparison due to the washer.

kenchan · 03-26-2012, 09:26 PM

Quote:

Originally Posted by nepali

Just got done washing/waxing my car! Man, I am tired! I had to do it because the weekend trip left a lot of bugs on the front bumper and windshield. I still can't get rid of 2-3 little spots...it's like they are embedded in there...ugh! Also found few rock chips!

Try some claybar. MOTHERS has a nice claybar kit off the shelf.

kenchan · 03-26-2012, 09:27 PM

Quote:

Originally Posted by Dembflyr

Oil change, rear camber arms and a quick wash today. Tomorrow I go get my RE-11's installed.

No exhaust this month. Hopefully early April.

early April is like next wk.

nepali · 03-26-2012, 09:54 PM

Quote:

Originally Posted by kenchan

Try some claybar. MOTHERS has a nice claybar kit off the shelf.

Will do...thank you for the tip.

gurneyeagle · 03-27-2012, 07:25 AM

Here's a link to some pictures from this past Sunday's Z Club of Houston cruise:

http://www.facebook.com/#!/media/set...3487763&type=1

It was a beautiful day, a lot of fun, and a great opportunity to see some really neat cars and meet some fun people.

gurneyeagle · 03-27-2012, 07:32 AM

Quote:

Originally Posted by kenchan

Try some claybar. MOTHERS has a nice claybar kit off the shelf.

BLASPHEMY!

In the words of our Founding Fathers - "Give me Griot's or give me death!"

You have brought shame upon this thread Ken-san.

To quote the great Griot's nazi - "No discount coupon for you!"

happytheman · 03-27-2012, 07:40 AM

Good morning guys! Enjoy your day (and coffee)!

Pauly · 03-27-2012, 07:51 AM

right on, happy! cheers!

Alchemy · 03-27-2012, 07:57 AM

Picked up some oil yesterday and topped off what I had burned. She was about a quart and a half low

Also yesterday I swapped out my PWJDM shift knob for the stock one. She has an appointment with the dealership tomorrow to have her transmission looked at. So Ill drive her today, drop her off tomorrow and get the bad news on Thursday

kenchan · 03-27-2012, 08:14 AM

Quote:

Originally Posted by gurneyeagle

BLASPHEMY!

In the words of our Founding Fathers - "Give me Griot's or give me death!"

You have brought shame upon this thread Ken-san.

To quote the great Griot's nazi - "No discount coupon for you!"

HAHAHA!

from experience I found mothers to be the easiest to use. Griots clay is wat I use, but it is soft and sticky.

Dembflyr · 03-27-2012, 08:18 AM

Quote:

Originally Posted by kenchan

early April is like next wk.

I know. I'm still trying to be optimistic.

RE-11's today!

My neighbors aren't gonna be happy when I leave but I have to get them tires.

GaleForce · 03-27-2012, 08:48 AM

Quote:

Originally Posted by gurneyeagle

BLASPHEMY!

In the words of our Founding Fathers - "Give me Griot's or give me death!"

You have brought shame upon this thread Ken-san.

To quote the great Griot's nazi - "No discount coupon for you!"

Quote:

Originally Posted by kenchan

HAHAHA!

from experience I found mothers to be the easiest to use. Griots clay is wat I use, but it is soft and sticky.

Shame, shame, Riccardo clay FTW.

GaleForce · 03-27-2012, 08:50 AM

Quote:

Originally Posted by Alchemy

Picked up some oil yesterday and topped off what I had burned. She was about a quart and a half low

Also yesterday I swapped out my PWJDM shift knob for the stock one. She has an appointment with the dealership tomorrow to have her transmission looked at. So Ill drive her today, drop her off tomorrow and get the bad news on Thursday

Good luck.

I get my hatch springs replaced today. Nowhere near as painful as transmission issues.

03-26-2012, 08:46 PM	#5536 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	Oil change, rear camber arms and a quick wash today. Tomorrow I go get my RE-11's installed. No exhaust this month. Hopefully early April. __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

03-26-2012, 09:18 PM	#5537 (permalink)
nepali Track Member Join Date: Apr 2011 Location: Dallas, TX Posts: 597 Drives: like a maniac! Rep Power: 15	Just got done washing/waxing my car! Man, I am tired! I had to do it because the weekend trip left a lot of bugs on the front bumper and windshield. I still can't get rid of 2-3 little spots...it's like they are embedded in there...ugh! Also found few rock chips! __________________ '11 SR/6MT/T/S

03-27-2012, 07:25 AM	#5542 (permalink)
gurneyeagle A True Z Fanatic Join Date: Jul 2011 Location: Houston/Saint Augustine Posts: 2,681 Drives: '18 Audi TT RS Rep Power: 20215	Here's a link to some pictures from this past Sunday's Z Club of Houston cruise: http://www.facebook.com/#!/media/set...3487763&type=1 It was a beautiful day, a lot of fun, and a great opportunity to see some really neat cars and meet some fun people. __________________ Waiting on the Z35! SOLD - 2011 Gun Metallic Touring 7AT w Sports Pkg & Nav, Nismo Bumper and Rims, RC Grille, RC Brake Ducts, H&R Spacers, Painted Door Hdls, GTR Start Button, Nav By-Pass, EVO R Fog Light, CF Ducktail, CF Interior Trim

03-27-2012, 07:40 AM	#5544 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Good morning guys! Enjoy your day (and coffee)! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

03-27-2012, 07:57 AM	#5546 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Picked up some oil yesterday and topped off what I had burned. She was about a quart and a half low Also yesterday I swapped out my PWJDM shift knob for the stock one. She has an appointment with the dealership tomorrow to have her transmission looked at. So Ill drive her today, drop her off tomorrow and get the bad news on Thursday __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

03-27-2012, 07:51 AM	#5545 (permalink)
Pauly Track Member Join Date: Feb 2012 Location: Lafayette, La Posts: 645 Drives: and parks Rep Power: 14	right on, happy! cheers!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 08:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 06:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 01:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM