What did you do with your Z today II

alcheng · 03-26-2012, 02:16 PM

Quote:

Originally Posted by GaleForce

It's like I say, if you have time to do something wrong, then you have the time to do it right, may as well do it right the first time.

Like buying a Z??

kenchan · 03-26-2012, 02:27 PM

Quote:

Originally Posted by alcheng

Like buying a Z??

hahaha, yah, and keeping it mostly stock.

im waiting for proclip to send me ETA for the motorola droid4 holder.

i think im going to upgrade from my droidx soooooon.

onzedge · 03-26-2012, 02:31 PM

Quote:

Originally Posted by onzedge

That sounds like a good approach.

This wheel spacer discussion has me thinking and worried now. I have H&R stud replacement on the front, but Ichiba non-stud replacement on the rear. Should I be concerned? Should I spend the rest ot the week fretting and obsessing, only to purchase stud-replacements for the rear?

Quote:

Originally Posted by kenchan

mr.onzedge - i wouldn't worry. i suppose if you start sensing vibration through your steering wheel it might be time to replace the spacer on the front. as for the rear, probably fine and infact 'better' to have the ichibas/Kic's since the centering ring has some room to move vs the single-molded hubcentric spacers by H&R/Eibach when using your stock 19's.

sounds great, mr.gale!

this goes with buying things too... i basically dont buy things unless i truely want it.

Now I think I am going to replace my rear spacers with stud-replacement types. While I am at it, I am thinking about going with ARP studs - is this overkill? Probably, but overkill and I are well acquainted -- all I have to do is look at my photo equipment, book collection or cd's.

alcheng · 03-26-2012, 02:38 PM

Quote:

Originally Posted by kenchan

hahaha, yah, and keeping it mostly stock.

im waiting for proclip to send me ETA for the motorola droid4 holder.

i think im going to upgrade from my droidx soooooon.

Mr.kenchan, stock FairladyZ = fairlady, why change her into a gothic.

droid4 is a very nice smartphone, consider your requirement is a physical keyboard. Otherwise, I am looking forward to the Galaxy SIII. I am still using my SII, just got it since last Jul and love it so far.

alcheng · 03-26-2012, 02:39 PM

Quote:

Originally Posted by onzedge

Now I think I am going to replace my rear spacers with stud-replacement types. While I am at it, I am thinking about going with ARP studs - is this overkill? Probably, but overkill and I are well acquainted -- all I have to do is look at my photo equipment, book collection or cd's.

Nice ---

kenchan · 03-26-2012, 02:41 PM

Quote:

Originally Posted by onzedge

Now I think I am going to replace my rear spacers with stud-replacement types. While I am at it, I am thinking about going with ARP studs - is this overkill? Probably, but overkill and I are well acquainted -- all I have to do is look at my photo equipment, book collection or cd's.

honestly i think you would be going backwards if you went to stud-replacement type while running stock 19's, unless you have stud-replacement spacers with separate centering rings.

if you're running aftermarket lug-centric wheels like mr.alcheng, then either one will work just fine.

especially for the rear when you have to swap to donuts it's not that difficult to remove the bolt-on spacers out in the field. if it's the front then you'll have to jam something in the disc brake in order to remove the spacer unless you have an impact at all times.

kenchan · 03-26-2012, 02:46 PM

Quote:

Originally Posted by alcheng

Mr.kenchan, stock FairladyZ = fairlady, why change her into a gothic.

droid4 is a very nice smartphone, consider your requirement is a physical keyboard. Otherwise, I am looking forward to the Galaxy SIII. I am still using my SII, just got it since last Jul and love it so far.

yep, i dont like 'typing' on faux keys on the touch panel. i prefer physical qwerty keyboard.

also, i prefer to buy american even if made in china.

so for me, apple for my computer needs (MBP), Motorola for my smartphone needs, and bb for my work needs.

BigT · 03-26-2012, 03:53 PM

Well my license suspension got over turned today. Stupid state DMV. I haven't touched my car in 2 weeks so i'm gonna wash her.

alcheng · 03-26-2012, 03:57 PM

Quote:

Originally Posted by kenchan

honestly i think you would be going backwards if you went to stud-replacement type while running stock 19's, unless you have stud-replacement spacers with separate centering rings.

if you're running aftermarket lug-centric wheels like mr.alcheng, then either one will work just fine.

especially for the rear when you have to swap to donuts it's not that difficult to remove the bolt-on spacers out in the field. if it's the front then you'll have to jam something in the disc brake in order to remove the spacer unless you have an impact at all times.

Mr.kenchan, how about those spacers have the "lips" that stick out for centering???

kenchan · 03-26-2012, 04:22 PM

Quote:

Originally Posted by alcheng

Mr.kenchan, how about those spacers have the "lips" that stick out for centering???

i call those the single molded ones. those work fine on lugcentric wheels like your vossens. you use tapered lugs instead of your stock lugs with washer, right?

that means less stress on the centering lip and wont break off. the stock wheels relies on that lip for stability. this is why sometimes they shear off under heavy load.

GaleForce · 03-26-2012, 04:30 PM

Quote:

Originally Posted by alcheng

Like buying a Z??

Yup!

alcheng · 03-26-2012, 04:58 PM

Quote:

Originally Posted by kenchan

i call those the single molded ones. those work fine on lugcentric wheels like your vossens. you use tapered lugs instead of your stock lugs with washer, right?

that means less stress on the centering lip and wont break off. the stock wheels relies on that lip for stability. this is why sometimes they shear off under heavy load.

not sure about tapered lugs, but they have to use smaller size lugs because the lug-hole on the vossen is smaller than OEM.

Fire · 03-26-2012, 06:55 PM

Congrats Big

SPOHN · 03-26-2012, 07:01 PM

Took my hood to the body shop to have my Carbon Signal vents installed. I hope they can pull it off for me. A little paranoid.

Fire · 03-26-2012, 07:08 PM

Spohn a little paranoid is good. I did my body work myself after talking with my body shop and getting a very negative vibe.

03-26-2012, 06:55 PM	#5533 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	Congrats Big __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

03-26-2012, 07:01 PM	#5534 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Took my hood to the body shop to have my Carbon Signal vents installed. I hope they can pull it off for me. A little paranoid. __________________

03-26-2012, 07:08 PM	#5535 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	Spohn a little paranoid is good. I did my body work myself after talking with my body shop and getting a very negative vibe. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 07:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 05:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 12:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM

03-26-2012, 03:53 PM	#5528 (permalink)
BigT Enthusiast Member Join Date: Jan 2012 Location: NJ Posts: 469 Drives: 98 2g DSM Rep Power: 13	Well my license suspension got over turned today. Stupid state DMV. I haven't touched my car in 2 weeks so i'm gonna wash her.