What did you do with your Z today II

kenchan · 03-02-2012, 03:08 PM

Quote:

Originally Posted by alcheng

Mr.kenchan, yes, this is the first time I stretch the Z since the intake and the removal of the clutch-sping!!

The sucking sound is more obvious than the 'test drive' last week between 3k-5k rpm and it pulls smoothly

Worth the $$$, LOL

Mr.Fire, Seems the ZL1 is fast, but the production is slow...Don't worry, people pays $250k for a Ferrari and have to wait for 12 months, compare to them, GM is doing a VERY VERY good job

Sounds awesome, mr.alcheng!

Nick911sc · 03-02-2012, 03:10 PM

Quote:

Originally Posted by alcheng

Mr.kenchan, yes, this is the first time I stretch the Z since the intake and the removal of the clutch-sping!!

The sucking sound is more obvious than the 'test drive' last week between 3k-5k rpm and it pulls smoothly

Worth the $$$, LOL

Mr.Fire, Seems the ZL1 is fast, but the production is slow...Don't worry, people pays $250k for a Ferrari and have to wait for 12 months, compare to them, GM is doing a VERY VERY good job

What intake?

kenchan · 03-02-2012, 03:12 PM

Quote:

Originally Posted by Nick911sc

Grueling phone conversation with a little Italian lady that insisted that I speak Italian since my father does lol. I can get by but I really need to brush up on it lol

Being trilingual is difficult lol

Lol, some old Italian guy once came to me asked my nationality and said I was family.

kenchan · 03-02-2012, 03:12 PM

Quote:

Originally Posted by Nick911sc

What intake?

The one despised by your fiance.

Nick911sc · 03-02-2012, 03:21 PM

MAF Tubes + drop ins?!

Cup of a carpenter!

kenchan · 03-02-2012, 03:47 PM

today needs to end sooon... too busy for a friday.

ZMan8 · 03-02-2012, 03:53 PM

Quote:

Originally Posted by kenchan

today needs to end sooon... too busy for a friday.

too bad i have to be in the office tomorrow as well

alcheng · 03-02-2012, 04:22 PM

Quote:

Originally Posted by Nick911sc

What intake?

This intake..

(Pics below)

Quote:

Originally Posted by kenchan

The one despised by your fiance.

Don't worry Mr.kenchan, Nick's parents will buy him as a gift later

Right??

Nick911sc · 03-02-2012, 04:28 PM

Quote:

Originally Posted by alcheng

Don't worry Mr.kenchan, Nick's parents will buy him as a gift later

Right??

How'd you know?!!

That intake looks awesome! SRI are very taboo for me on the Z. I would buy the R2C in a heartbeat, but other than throttle response I think people see a loss in power? IDK WHAT TO DO.... I don't want long tube intakes though

ZMan8 · 03-02-2012, 04:40 PM

Mr. Alcheng please provide a mini review of the intake. Where is most noticable gain?

ZMan8 · 03-02-2012, 04:40 PM

Quote:

Originally Posted by Nick911sc

How'd you know?!!

That intake looks awesome! SRI are very taboo for me on the Z. I would buy the R2C in a heartbeat, but other than throttle response I think people see a loss in power? IDK WHAT TO DO.... I don't want long tube intakes though

Drop ins and post MAF then?

Nick911sc · 03-02-2012, 04:44 PM

Quote:

Originally Posted by ZMan8

Drop ins and post MAF then?

Yea most likely. But my problem is I WANT the R2C's to be good. haha You know what I mean? MAF + drop in's is sort of middle of the road.

ZMan8 · 03-02-2012, 04:49 PM

Quote:

Originally Posted by Nick911sc

Yea most likely. But my problem is I WANT the R2C's to be good. haha You know what I mean? MAF + drop in's is sort of middle of the road.

Yeah, It's a tough choice. how much are R2C's?

Nick911sc · 03-02-2012, 04:53 PM

Quote:

Originally Posted by ZMan8

Yeah, It's a tough choice. how much are R2C's?

I honestly couldn't tell you as I haven't looked at them for awhile... In the $400-500 range?

kenchan · 03-02-2012, 04:55 PM

Quote:

Originally Posted by ZMan8

too bad i have to be in the office tomorrow as well

oh noez...

but i have to take my older kid to school, do PTA stuff am and pm, while doing house chores so not so much all fun and games for me any weekend.

Quote:

Originally Posted by alcheng

This intake..

(Pics below)

Don't worry Mr.kenchan, Nick's parents will buy him as a gift later

Right??

hahaha! that's true, mr.alcheng. lol

Quote:

Originally Posted by ZMan8

Drop ins and post MAF then?

that's wat i have.. HPS and K&N combo.

Quote:

Originally Posted by ZMan8

Yeah, It's a tough choice. how much are R2C's?

R2C'are good too.

i had them last year but sold. it has nice gains as far as response, but cai's in general were too noisy for me so i went with the HPS/K&N drop-ins setup. i might go back to stock tubes and just run K&N drop-ins. nothing wrong with the HPS, i dont sense any gains from the tubes alone so i rather have factory bits in this case.

03-02-2012, 04:40 PM	#3100 (permalink)
ZMan8 A True Z Fanatic Join Date: Oct 2011 Location: Chicago, IL Posts: 5,844 Drives: 10 370z 40th M6 Rep Power: 659	Mr. Alcheng please provide a mini review of the intake. Where is most noticable gain? __________________ 2010 370Z 40 Anniv., 6 MT \| Fast Intentions \| Swift Springs \| SPC \| Z1Motorsports \| JWM \| Redline Oils \| 35% Window Tint 2015 Mazda6 \| 370ZChicago: Chicago Area Cars & Coffee

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 08:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 06:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 01:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM

03-02-2012, 03:21 PM	#3095 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 20	MAF Tubes + drop ins?! Cup of a carpenter!

03-02-2012, 03:47 PM	#3096 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	today needs to end sooon... too busy for a friday.