What did you do with your Z today II

gurneyeagle · 01-29-2012, 08:21 PM

Quote:

Originally Posted by ZForce

Update on the brother - Hal: Surgery lasted 4 hours and ICU for an additional 2 hours. The procedure was a success, we will not know the results for sometime. Will be released on Monday for the remaining recovery at home.

Thanks guys for all your well wishes!! You guys are like family, correction....you are family!!

Awesome, awesome news!

onzedge · 01-29-2012, 08:22 PM

Quote:

Originally Posted by ZForce

Update on the brother - Hal: Surgery lasted 4 hours and ICU for an additional 2 hours. The procedure was a success, we will not know the results for sometime. Will be released on Monday for the remaining recovery at home.

Thanks guys for all your well wishes!! You guys are like family, correction....you are family!!

That's good news. Tell Hal that all of over at Donald and Kate's said hello and that we are thinking about him.

pedZ · 01-29-2012, 08:23 PM

Quote:

Originally Posted by onzedge

So this may be a dumb question so forgive me if it is. Is there an easy way to tell if one's Z is pre-wired or not?

Also, I have one last set of parts sitting on my "Parts that I bought but have not gotten around to installing yet" shelf. They are the Nissan OEM rear fog light and the Motorsports wiring harness with switch. I am hesitaing for two reasons.

First, it looks like there is a significant amount of interior work that needs to occur. Second, have I mentioned that my steering lock mechanism is dead and I am waiting for the part, which will be another two weeks. I mentioned that, right? I think I did.

If you look behind the rear fog light you should see the wiring harness clipped on to the left of the fog light bracket if you car comes with it.

pedZ · 01-29-2012, 08:24 PM

Quote:

Originally Posted by ZForce

Update on the brother - Hal: Surgery lasted 4 hours and ICU for an additional 2 hours. The procedure was a success, we will not know the results for sometime. Will be released on Monday for the remaining recovery at home.

Thanks guys for all your well wishes!! You guys are like family, correction....you are family!!

Good to hear that the surgery went well.

Waiz · 01-29-2012, 08:28 PM

I went to Pepboys to buy a new carvac and they didn't have one that I could use within the car so I instead went home and thoroughly cleaned out the old filter and body of my carvac and saved myself $50!

I also took the time to throughly clean my Drying Chamois and Sheepskin Car mitt just to make sure that I am not leaving dirt residue on my car during the next wash

370ZilverZ · 01-29-2012, 08:51 PM

Quote:

Originally Posted by Waizzz

I went to Pepboys to buy a new carvac and they didn't have one that I could use within the car so I instead when home and thoroughly cleaned out the old filter and body of my carvac and saved myself $50!

I also took the time to throughly clean my Drying Chamois and Sheepskin Car mitt just to make sure that I am not leaving dirt residue on my car during the next wash

Looks like a little extra cash to save for the next mod and time saved for a clean scratch free car wash.

Waiz · 01-29-2012, 08:56 PM

Quote:

Originally Posted by daemon1957

Looks like a little extra cash to save for the next mod and time saved for a clean scratch free car wash.

My thoughts exactly!

kenchan · 01-29-2012, 09:57 PM

Quote:

Originally Posted by ZForce

Update on the brother - Hal: Surgery lasted 4 hours and ICU for an additional 2 hours. The procedure was a success, we will not know the results for sometime. Will be released on Monday for the remaining recovery at home.

Thanks guys for all your well wishes!! You guys are like family, correction....you are family!!

Glad to hear Hal's surgery was a success!

please wish him well.

I'm sure it was tough on you and your family too. Hope you all get some rest too.

happytheman · 01-29-2012, 10:20 PM

Zforce, I am so glad to hear that your brother made it through surgery!

Send him our collective best wishes! I hope he recovers well, and his results are of a positive nature!

onzedge · 01-29-2012, 10:25 PM

Quote:

Originally Posted by pedZ

If you look behind the rear fog light you should see the wiring harness clipped on to the left of the fog light bracket if you car comes with it.

If I have the harness, do you know the best way to wire the swith in?

pedZ · 01-29-2012, 11:06 PM

Quote:

Originally Posted by onzedge

If I have the harness, do you know the best way to wire the swith in?

If you use the pre-wired harness, the best option is to tap into the BCM wiring like in this thread.

DIY: Rear Fog Light Wire Via BCM and Stock Wiring

You'll just have to run the wires from the BCM to the center console and connect them to whatever switch you use. Oh, and you'll have to add a diode like Spearfish talks about in the DIY. If you are using a switch without a LED you'll have to run two wires, and with a LED will need four wires.

onzedge · 01-29-2012, 11:11 PM

Quote:

Originally Posted by pedZ

If you use the pre-wired harness, the best option is to tap into the BCM wiring like in this thread.

DIY: Rear Fog Light Wire Via BCM and Stock Wiring

You'll just have to run the wires from the BCM to the center console and connect them to whatever switch you use. Oh, and you'll have to add a diode like Spearfish talks about in the DIY. If you are using a switch without a LED you'll have to run two wires, and with a LED will need four wires.

Thank you.

pedZ · 01-29-2012, 11:19 PM

Quote:

Originally Posted by onzedge

Thank you.

No problem.

I guess there is one better option and that is to buy the Canadian steering wheel stalks. That way you can make it an OEM setup but from what I've read those canadian stalks will run you about 4 bills.

ZForce · 01-29-2012, 11:45 PM

Thank guys, we appreciate your kind thoughts and well wishes. I am hoping for some good sleep starting tomorrow night once he is back home.

onzedge · 01-30-2012, 09:14 AM

Quote:

Originally Posted by ZForce

Thank guys, we appreciate your kind thoughts and well wishes. I am hoping for some good sleep starting tomorrow night once he is back home.

01-29-2012, 08:28 PM	#815 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	I went to Pepboys to buy a new carvac and they didn't have one that I could use within the car so I instead went home and thoroughly cleaned out the old filter and body of my carvac and saved myself $50! I also took the time to throughly clean my Drying Chamois and Sheepskin Car mitt just to make sure that I am not leaving dirt residue on my car during the next wash Last edited by Waiz; 01-29-2012 at 08:56 PM.

01-29-2012, 10:20 PM	#819 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Zforce, I am so glad to hear that your brother made it through surgery! Send him our collective best wishes! I hope he recovers well, and his results are of a positive nature! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 08:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 06:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 01:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM

01-29-2012, 11:45 PM	#824 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Thank guys, we appreciate your kind thoughts and well wishes. I am hoping for some good sleep starting tomorrow night once he is back home.