What did you do with your Z today II

onzedge · 03-19-2012, 10:40 PM

Nice stuff, Mr. EaZyD. Nice barn also.

Srenity · 03-19-2012, 11:35 PM

Good afternoon Z people.

My Carbon Signal Type N duck bill add on wing got delivered today. I did a really quick test fit and it fits well and looks pretty good. The one thing that I don't really like is the noticeable step from the factory wing to the add on wing since it sits on top of the old one. It slightly bothered me in the pics and does so in real life as well. I am considering either having it molded onto factory wing or perhaps getting a FRP factory replica to mold it to. That way I do not mess up my factory wing for potential future sale back in original condition. Any thoughts are welcome.......other than shipping my wing to you that is

ZMan8 · 03-20-2012, 12:26 AM

whew...lots of catching up for me to do with this thread.

How has everyones day been?

Kenchan, what will you be using the"jdm" tape for?

ZMan8 · 03-20-2012, 12:27 AM

Quote:

Originally Posted by Crux

I read about plasti dip and then saw it first hand at a meet in Columbia a little over a week ago and decided to take a chance and try it out this past weekend. I figured if I messed up and/or didn't like it, I could peel it off

So here's before, during, and after.

It took about 4 hours to dry completely, but I'm really pleased with the results!

That looks very nicely done. The red and black contrasts always very well and it looks oem! props

Skeeterbop · 03-20-2012, 12:43 AM

Appears people are getting the Z's ready for spring/summer fun! I like how the red contrasts with the black plastidip Crux.

EazyD · 03-20-2012, 12:47 AM

Quote:

Originally Posted by onzedge

Nice stuff, Mr. EaZyD. Nice barn also.

Thank you Mr. On Z Edge.

alcheng · 03-20-2012, 02:11 AM

Quote:

Originally Posted by gurneyeagle

Streaks created by the wax. Hard to see unless in the right light at the right angle. Definitely not something to turn you off from the product, but it just shows that, although synthetics are convenient, they don't replace old school carnuba.

It's just I had some bad experience with regular wax before so I look for something different this time to try out.

Regarding the streaks, I use a clean microfiber cloth and make sure just use very gentle force to wipe off the wax, so far it works out fine.

Those streaks you mention, somehow, they'd be easily noticed when you're in the gas station.

Quote:

Originally Posted by ZMan8

whew...lots of catching up for me to do with this thread.

How has everyones day been?

Kenchan, what will you be using the"jdm" tape for?

Mr.kenchan, that's my question too. Are you using those masking tapes to mask the plastic part during waxing your Z??

note: waxing-- I mean car waxing, not those hair-removal-waxing.

KingZee · 03-20-2012, 03:47 AM

Quote:

Originally Posted by bbigby64

What products do you use for surface cleaning the engine?

Quote:

Originally Posted by happytheman

Nice KingZee!

We don't hear about the time people spend in their bays much.

What products do you use?

My fiancee bought me a bunch of cans of FW1 Cleaning Wax a while back because they were selling it by where she works...I have never used the stuff on my paint, I use NXT Tech Wax for that, but for the wheels, plastic and engine bay this stuff works wonders! I just spray it on a microfiber and use it to wipe down all plastic, rubber and metal...takes up all the dirt and brings everything to a nice new looking shine. They usually sell the stuff outside of gas stations and mall kiosks.

happytheman · 03-20-2012, 07:45 AM

Quote:

Originally Posted by Alcheng

Are you using those masking tapes to mask the plastic part during waxing your Z??

note: waxing-- I mean car waxing, not those hair-removal-waxing.

I think you nailed this one with a cross-court shot! Taping off the during polishing/waxing was my guess too!

Good morning Z Crew!

kenchan · 03-20-2012, 07:54 AM

Morning mr.alcheng and everyone!

I use the jdm tape to mask off seals (black parts of car) and nooks when polishing.

. Wax is not too big of an issue but polish residue is a pita to remove when dry.

GaleForce · 03-20-2012, 08:54 AM

Good morning everyone.

I'll be taking the Z for a drive down the highways to the big city today, weather permitting. Last time I did this I had a truck blow it's tire in front of me. I avoided most of it except for 1 piece. Ended up ripping my O2 sensor plug off the bracket and it became unplugged. Damn trucks. Luckily the actual plug connection wasn't damaged but the "bird beak" is MIA.

Alchemy · 03-20-2012, 09:06 AM

gurneyeagle · 03-20-2012, 09:07 AM

Quote:

Originally Posted by Srenity

Good afternoon Z people.

My Carbon Signal Type N duck bill add on wing got delivered today. I did a really quick test fit and it fits well and looks pretty good. The one thing that I don't really like is the noticeable step from the factory wing to the add on wing since it sits on top of the old one. It slightly bothered me in the pics and does so in real life as well. I am considering either having it molded onto factory wing or perhaps getting a FRP factory replica to mold it to. That way I do not mess up my factory wing for potential future sale back in original condition. Any thoughts are welcome.......other than shipping my wing to you that is

Unless you have it molded into the factory spoiler, there is no way to avoid the step. It's really no different from the Porsche ducktails of the 70's.

Being it's contrasting carbon fiber, the step is irrelevent to me. If your's is FRP, then molding it into the factory spoiler makes perfect sense and would look great.

I've gotten nothing but compliments from everyone who has seen it, including my dealer's bodyshop manager.

Whatever you end up doing, I'm confident you are going to love the spoiler. It's one of my favorite mods so far.

gurneyeagle · 03-20-2012, 09:11 AM

Good Morning All.

Just a little torrential flooding rain and a tornado warning to deal with this morning here in Houston. It's kind of neat watching the storm move in from my office.

Only Z action though Thursday will be commuting. Friday is wash, polish, and wax day. Got two big Z Club functions this weekend (weather issupposed to be perfect), and I want the ride looking prime.

I'll be able to update the avatar too. The lift from the stock springs from the Tanabes looks great to me. I am changing out the 20mm rear spacers to 10mm.

onzedge · 03-20-2012, 09:17 AM

Quote:

Originally Posted by KingZee

My fiancee bought me a bunch of cans of FW1 Cleaning Wax a while back because they were selling it by where she works...I have never used the stuff on my paint, I use NXT Tech Wax for that, but for the wheels, plastic and engine bay this stuff works wonders! I just spray it on a microfiber and use it to wipe down all plastic, rubber and metal...takes up all the dirt and brings everything to a nice new looking shine. They usually sell the stuff outside of gas stations and mall kiosks.

Where did she get it?

Good Morning, Everyone!!!

03-19-2012, 10:40 PM	#4876 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 64 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	Nice stuff, Mr. EaZyD. Nice barn also. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

03-20-2012, 12:26 AM	#4878 (permalink)
ZMan8 A True Z Fanatic Join Date: Oct 2011 Location: Chicago, IL Posts: 5,844 Drives: 10 370z 40th M6 Rep Power: 659	whew...lots of catching up for me to do with this thread. How has everyones day been? Kenchan, what will you be using the"jdm" tape for? __________________ 2010 370Z 40 Anniv., 6 MT \| Fast Intentions \| Swift Springs \| SPC \| Z1Motorsports \| JWM \| Redline Oils \| 35% Window Tint 2015 Mazda6 \| 370ZChicago: Chicago Area Cars & Coffee

03-20-2012, 12:43 AM	#4880 (permalink)
Skeeterbop A True Z Fanatic Join Date: Jan 2011 Location: Fort Bliss, TX Age: 40 Posts: 1,440 Drives: 2011 GM 370 base SP Rep Power: 16	Appears people are getting the Z's ready for spring/summer fun! I like how the red contrasts with the black plastidip Crux. __________________ Srenity: "Yeah no rest needed to spread the love when your 20 that's for sure...."

03-20-2012, 08:54 AM	#4886 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Good morning everyone. I'll be taking the Z for a drive down the highways to the big city today, weather permitting. Last time I did this I had a truck blow it's tire in front of me. I avoided most of it except for 1 piece. Ended up ripping my O2 sensor plug off the bracket and it became unplugged. Damn trucks. Luckily the actual plug connection wasn't damaged but the "bird beak" is MIA. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

03-20-2012, 09:06 AM	#4887 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 45 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	__________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

03-19-2012, 11:35 PM	#4877 (permalink)
Srenity Track Member Join Date: Mar 2009 Location: San Luis Obispo, CA Posts: 537 Drives: 40th Rep Power: 18	Good afternoon Z people. My Carbon Signal Type N duck bill add on wing got delivered today. I did a really quick test fit and it fits well and looks pretty good. The one thing that I don't really like is the noticeable step from the factory wing to the add on wing since it sits on top of the old one. It slightly bothered me in the pics and does so in real life as well. I am considering either having it molded onto factory wing or perhaps getting a FRP factory replica to mold it to. That way I do not mess up my factory wing for potential future sale back in original condition. Any thoughts are welcome.......other than shipping my wing to you that is

03-20-2012, 07:54 AM	#4885 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Morning mr.alcheng and everyone! I use the jdm tape to mask off seals (black parts of car) and nooks when polishing. . Wax is not too big of an issue but polish residue is a pita to remove when dry.

03-20-2012, 09:11 AM	#4889 (permalink)
gurneyeagle A True Z Fanatic Join Date: Jul 2011 Location: Houston/Saint Augustine Posts: 2,681 Drives: '18 Audi TT RS Rep Power: 20215	Good Morning All. Just a little torrential flooding rain and a tornado warning to deal with this morning here in Houston. It's kind of neat watching the storm move in from my office. Only Z action though Thursday will be commuting. Friday is wash, polish, and wax day. Got two big Z Club functions this weekend (weather issupposed to be perfect), and I want the ride looking prime. I'll be able to update the avatar too. The lift from the stock springs from the Tanabes looks great to me. I am changing out the 20mm rear spacers to 10mm. __________________ Waiting on the Z35! SOLD - 2011 Gun Metallic Touring 7AT w Sports Pkg & Nav, Nismo Bumper and Rims, RC Grille, RC Brake Ducts, H&R Spacers, Painted Door Hdls, GTR Start Button, Nav By-Pass, EVO R Fog Light, CF Ducktail, CF Interior Trim

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 08:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 06:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 01:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM