What did you do with your Z today II

ImportConvert · 02-29-2012, 12:52 PM

As to coffee...I drink Cava. It is acid-neutral and dark. Instant coffee isn't the primo stuff, though.

Fire · 02-29-2012, 12:56 PM

LOL Yu guys is whacked

great job Dallaz. More mods more mods

Alchemy · 02-29-2012, 12:59 PM

Quote:

Originally Posted by alcheng

Mr.happtheman, all you need is the Rear Camera, then you are good to go....Backward

Sames as Investment Adviser.....

LOL

jk, no offense if there are investment advisers in here, LOL

Mr.kenchan, decaf prevent you from staying

, the Acid helps you digest.

Mr.onzedge,

Mr.solarguy09, buy a house with Five Garages, problem solved.

Snowing and winds blowing like no tomorrow in here since early morning. And it always happen on Wed, my off day.

Anyway, was looking at some shift knobs last night and have 3 in my mind so far..

Anyone has any idea on what is that 'Reverse' style from MOMO is like?? It's short and I like the round style.

The PWJDM one is made of Delrin, is it a rubber type of material?

Pics Here, left to right: MOMO NERO, MOMO NERO Reverse, MOMO Race-EVO, PWJDM Ver.2.

what do your guys think??

The derlin is a hard plastic I believe. Too light imo. If you get the PWJDM go stainless steel.

Dallaz · 02-29-2012, 01:22 PM

I have the black Nismo shift knob and I love it! It looks really cool at night too, sometimes almost appearing transparent because of the way it reflects light and my dark interior. Every once in a while I do miss the feel of the stock shift knob.... You don't know what you've got till its gone haha.

alcheng · 02-29-2012, 01:28 PM

Quote:

Originally Posted by ZMan8

I like the stainless steel PWJDM knob a bit better:
Password:JDM V.2 Stainless Steel Shift Knob (Nissan 370Z) | Password JDM

Quote:

Originally Posted by Gauge

I know people will tease me but I like the Nismo CF wrapped one. THose MOMO's look nice though.

Quote:

Originally Posted by Alchemy

The derlin is a hard plastic I believe. Too light imo. If you get the PWJDM go stainless steel.

I like those metal one too, just always they might get too hot to grab in a summer day, what is the experience you guys have??

If the metal knob doesn't get too hot, then I can have more choices, but yes, the MOMOs are my fav.

BTW, the interior of my Z is frost.

Dallaz · 02-29-2012, 01:29 PM

I went insane with the vacuum the other day (if there is such a thing to a car enthusiast) and cleaned the whole interior. She's lookin so clean I had to take a photo!

It looks much better full size. I have these photos in my build thread and they look a lot better than uploaded from the iPhone.

TheGreatOne · 02-29-2012, 01:36 PM

Quote:

Originally Posted by Dallaz

I have the black Nismo shift knob and I love it! It looks really cool at night too, sometimes almost appearing transparent because of the way it reflects light and my dark interior. Every once in a while I do miss the feel of the stock shift knob.... You don't know what you've got till its gone haha.

Same knob I have, love it!

Question: for your CF Rear Spats did you make/receive a brace or just have it attached via screws/3M tape?

Apparently Sunline sends with brackets and screws (Shine Auto which I got) you get zip lol.

Huck · 02-29-2012, 01:36 PM

I installed my Stillen G3's last night. Turned out that whoever had the car before me had them as well, because the holes were already cut and ready to go, made my job easier.

---
I am here: http://maps.google.com/maps?ll=28.354300,-80.686682

ZMan8 · 02-29-2012, 01:37 PM

Quote:

Originally Posted by alcheng

I like those metal one too, just always they might get too hot to grab in a summer day, what is the experience you guys have??

If the metal knob doesn't get too hot, then I can have more choices, but yes, the MOMOs are my fav.

BTW, the interior of my Z is frost.

With tints I would imagine the knob should be fine.

ZMan8 · 02-29-2012, 01:38 PM

Quote:

Originally Posted by Huck

I installed my Stillen G3's last night. Turned out that whoever had the car before me had them as well, because the holes were already cut and ready to go, made my job easier.

Looks good. And

for precut holes

kenchan · 02-29-2012, 01:45 PM

Quote:

Originally Posted by Fire

Oh Kenman somebody made fun of you. WTH I'd report them. Once you get your sushi charboilchessyburger eaten and chased with your chedder fries and milk shake

how was your tacobell, fire?

Fire · 02-29-2012, 01:49 PM

Pretty good Kenman would you believe I haven't used hot sauce for 3 days? I'm like going

from withdrawal

kenchan · 02-29-2012, 01:50 PM

Quote:

Originally Posted by alcheng

I think in that case, Agent kenchan will choose to chase for ice-cream instead, eh... LOL

oh..... plsss, don't

me, LOL.

mr.alcheng- hey now, i dont go for just any icecream. it must be HagDaz Coffee icecream.

their GreenTea is pretty good too (better than Maeda-en which is a j-brand) but Coffee is the one i likes the bestest.

all the other icecreams are for wimps.

Quote:

Originally Posted by Dallaz

I went insane with the vacuum the other day (if there is such a thing to a car enthusiast) and cleaned the whole interior. She's lookin so clean I had to take a photo!

It looks much better full size. I have these photos in my build thread and they look a lot better than uploaded from the iPhone.

hahaha!

looks good, nice job.

huck- looking good!

Gauge · 02-29-2012, 01:51 PM

Quote:

Originally Posted by Huck

I installed my Stillen G3's last night. Turned out that whoever had the car before me had them as well, because the holes were already cut and ready to go, made my job easier.

( Click to show/hide )

---
I am here: Google Maps

Hah, did he do a decent job cutting the holes?

Fire · 02-29-2012, 01:51 PM

Gots to go guys. Working tonight

Tomorrow my father is getting a simple orthoscopic knee surg. Take care guys

02-29-2012, 12:56 PM	#2672 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	LOL Yu guys is whacked great job Dallaz. More mods more mods __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

02-29-2012, 01:36 PM	#2678 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 41 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	I installed my Stillen G3's last night. Turned out that whoever had the car before me had them as well, because the holes were already cut and ready to go, made my job easier. --- I am here: http://maps.google.com/maps?ll=28.354300,-80.686682 __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

02-29-2012, 01:49 PM	#2682 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	Pretty good Kenman would you believe I haven't used hot sauce for 3 days? I'm like going from withdrawal __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

02-29-2012, 01:51 PM	#2685 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	Gots to go guys. Working tonight Tomorrow my father is getting a simple orthoscopic knee surg. Take care guys __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 05:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 08:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 06:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 01:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 01:42 AM

02-29-2012, 12:52 PM	#2671 (permalink)
ImportConvert A True Z Fanatic Join Date: Jun 2010 Location: SWMO Posts: 4,454 Drives: 2019 CX5 GT Reserve Rep Power: 7627	As to coffee...I drink Cava. It is acid-neutral and dark. Instant coffee isn't the primo stuff, though.